Target table, tr, th and td tags directly and stop using the corresponding
CSS class names.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 70571084004ede442e7f2e944d17156c83182a24)
Also ensure that port devices are ordered numerically.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 8c71b1d01ee234c5681684e9aae5f63dbe9ebb07)
Fixes compilation under 32bit systems by using the proper printf format
specifier for size_t values.
Also fixes compilation with Ninja by appending instead of
overwriting CMAKE_OPTIONS.
Fixes: #5116
Suggested-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit d1fc11d852262bacb650a49782dbce0c8cbd572a)
The migration code attempted to add new device sections instead of moving
the ifname option to a ports list within the existing ones.
Fixes: #5108
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit e13d82a202975bd9ac5eca380049b887cb1d585d)
Restore the display of bridge port device icons in the interface overviews.
This feature has been lost after migrating the network config from legacy
bridge declarations to device bridge declarations.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 608f89429b4b8537ddaefd070c777a6d4fb1c7a1)
OpenWrt switched from "option hwmode" to "option band" in order to select
the frequency band to use for the radio phy.
Extend the channel selector to recognize and use an existing "option band"
to select the appropriate channel list. When operating upon a wireless
configuration still using "option hwmode", then translate it to a band
value internally and translate it back to "option hwmode" on save.
This should provide forward- and backwards compatibility with both current
OpenWrt master and older versions still using hwmode.
Fixes: #5106
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 0829d31290e7c902743fbd86ea91b06ee90c6e42)
It is legal to have two device sections referring to the same netdev if one
section is a declaration (a section setting option type) and the other is
a configuration (a section not specifying a type but matching an existing
netdev).
Support this case in LuCI since it might be required for some complex
device setups.
Additionally, fix the device type determination for device configuration
sections without type, those should be treated as ethernet (a.k.a.
simple device) configuration instead of falling back to the underlying
netdev device type.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit a6c0ad00b28a5d3f91338b50f7e69fbd45f2154e)
Add the known values returned for 802.11ax HW as well as HT modes to the
respective method descriptions.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 4b17f8baa3574527dc6ab8914fd322a08cb9784c)
This commit adds the ability to configure HE-modes for radios
(HE20 / HE40 / HE80 / HE160) as well as HE rate information in the
assiciation view.
Tested-on: Ubiquiti UniFi 6 Lite / LR
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit f35e877dc65c727a6ce7f7972a5be4d15921827b)
Treat not explicitly configured, preexisting VLAN interfaces as simple
network devices when adding configuration for them, since it is more
likely that people want to set general device properties such as MAC
address instead of reconfiguring ingress/egress QoS mapping, which is
the only editable property of preexisting VLAN device config dialogs.
Ref: https://github.com/openwrt/luci/issues/5102
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 3c6b59504aaa6ee33a2ee768aafc0aeaefb06004)
- Condense overly large IPv6 RA/DHCPv6 description texts and get rid of most embedded markup
- Switch ra/ndp/dhcpv6 mode selections to rich dropdown lists and move extended choice
descriptions next to the selection options
- Drop ndproxy_static option which has been removed from odhcpd long ago
- Add format validations to all text input fields
- Add ability to configure master/relay modes for non-static interfaces (#2998)
- Move extended RA configuration options into a new tab
- Prevent enabling master mode on multiple interfaces
- Prevent enabling ra/dhcpv6 server mode on non-static or master interfaces
- Drop ra_management in favor to ra_flags option (#5083)
- Add support for dns_service option
- Read current effective IPv6 MTU and hop limit placeholder values from procfs
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 3fbd4338846e8229935b54256a3a541a3e15d8bd)
Rework some further code instances to fall back to the legacy ipv4/ipv6
properties if needed.
Fixes: c7b7b42cd3 ("treewide: Update JS using luci-rpc getHostHints")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit dc0cfc642e42eefcac91bb965f9aa612089fad5d)
The iptables mark field is 32 bits wide, which is 4 bytes and so 8 hex
characters. Fix the fwmark validation to allow 8 characters in the hex
string.
Fixes: #5098
Suggested-by: Robert <32970961+differentblue@users.noreply.github.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit bc1015f7db57506b2468846f79dbd5bfe0dbea7a)
Update frontend JS code which uses luci-rpc getHostHints to support the new
response format which removes the `ipv4` and `ipv6` host hint string fields
and replaces them with `ipaddrs` and `ip6addrs` weighted string list fields.
Signed-off-by: Niels Widger <niels@qacafe.com>
[rework code to be forwards/backwards compatible, fix some Network.Hosts
methods, fix IP choice ordering, change commit subject, rewrap commit
message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit c7b7b42cd3840cfd67f412191578a8659eb63c87)
Update luci-rpc's getHostHints method to return two string arrays for
each host, `ipaddrs` and `ip6addrs`, each containing the host's IPv4
and IPv6 addresses, respectively. Each array is sorted by a priority
derived from the source from which the address was discovered. The
current address sources and their priority is as follows (a
higher (larger) priority is listed first):
- neighbor table entries: 10
- /etc/ethers entries: 50
- DHCP leasefile: 100
- RRDNS queries: 100
- getifaddrs(): 200
- UCI static leases: 200
The existing `ipv4` and `ipv6` string fields for each host in
`getHostHints` has been removed. Downstream users of getHostHints
still need to be updated.
Fixes: #4838
Signed-off-by: Niels Widger <niels@qacafe.com>
[squash commits, reformat fixes tag]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit a5195e7825cbbc3942ca6e571ae0020c1cf080c4)
This is required to resolve clashes with the generic "option device"
referring to netdev names in current netifd versions.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 96ee6dc8d6c9796ab67de6f313a068a4bd3bb20f)
This is required to resolve conflicts with the existing "device" option
in other proto handlers such as PPP or QMI where "device" refers to the
device path of the tty control device instead of a netdev name.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 10f02472c5fdab72615a7d3695e8f354811cd661)
If different options point to the same underlying uci option, we must only
remove the uci value if none of the other alias options is active in order
to prevent inactive options (due to unsatisfied depends) removing the uci
value of active once on save.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit f3f74bd0fe66b94a99a8d944b63dcd6bdd1b93c6)
The still referenced help.gif icon is absent by default since it has been
moved to luci-compat.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 69608199973651baf585d24a095edf8c0c42e21f)
This commit effectively reverts the change made with
907b4222f7 ("luci-mod-network: don't hide "Device" on protocol change").
Floating tunnel protocols such as 6in4, plain PPP over modem device,
VPNC etc. do not have any layer 2 device at all, for such protocols the
device selector should be hidden.
Also swap back the incorrect option order introduced with commit
b7f3cf66ca ("luci-mod-network: drop support for *adding* legacy bridges").
Since device depends on proto, it should come after the protocol selection,
not before.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit fc12933670ba9efd87a24b6823cf57a666b54c1a)
Commit b7f3cf66ca "luci-mod-network: drop support for *adding* legacy bridges"
dropped the protocol dependcies of the ifname/device selector in the add new
interface dialog.
Re-add the required dependencies and swap the order of the protocol and
device inputs while we're at it since latter depends on the former.
Fixes: b7f3cf66ca ("luci-mod-network: drop support for *adding* legacy bridges")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 147188f6ee7067119746ffc2a505ef8f4eb8943a)
Existing javascript did not read a non-default statistics hostname due to
incorrect config ids.
Signed-off-by: Anderson McKinley <coyoso@tuta.io>
(cherry picked from commit 97424d57af1d0e02ea914012c47987541d7ee6a6)
Using the scalable graphic in place of the static png file saves some
ressources in flash and network. It also aligns the filetype to the type
announced to the browser.
fixes GitHub-issue #5051
Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
(cherry picked from commit 184e93df5f0365d403d4d7a6243286cbe5b914de)
This calls striptags() on the hostname to prevent any XSS over the
hostname. This should fix CVE-2021-33425 as far as I understood it.
If someone adds some Javascript into system.@system[0].hostname it would
have been directly added to the page, this prevents the problem.
This can only be exploited by someone being able to modify the uci
configuration, normally a user with such privileges could also just
modify the webpage.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 5cbd79d7e31c0f0feaea2770bf102bbae7831e3c)
When including luci.mk in external repos it's sometimes usefull to not use
the default LuCI-submenu hierarchy.
This change defines the LUCI_SUBMENU_FORCED variable which completely overrides
the default submenu of the LuCI config-section. When LUCI_SUBMENU_FORCED is not
defined, the default submenu derrived from LUCI_TYPE or "Application" fallback
is used.
Defining LUCI_SUBMENU_FORCED in the package Makefile will just use this value.
Setting it to "none" will not define a submenu at all.
Together with LUCI_SECTION and LUCI_CATEGORY menu items can now created at any
place in the menu structure.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
(cherry picked from commit 2b11ec6fd02be060443cf4afc9d89058aadcfab3)
Add PKG_PROVIDES macro to be passed down to buildpackage defines as PROVIDES variable.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
(cherry picked from commit 209141d49153b999c42b0410010366789b36e86d)
Add the LUCI_URL and LUCI_MAINTAINER variables to pass them to the buildpackage
defines. Give them some sane defaults and allow overwritting by the individual
package.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
(cherry picked from commit ae0795deb0c908515550236254b04334be8f90bf)
