95 lines
3.6 KiB
Diff
95 lines
3.6 KiB
Diff
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
|
|
From: Armbian <[email protected]>
|
|
Date: Thu, 23 Jan 2026 12:00:00 +0000
|
|
Subject: [PATCH] rk3399: Initialize DMAC SGRF registers and reset for PL330 DMA
|
|
|
|
Mainline TF-A doesn't initialize SGRF_SOC_CON8-CON15 which control
|
|
DMAC0 and DMAC1 configuration. Without this, the PL330 DMA controllers
|
|
cannot be accessed from Linux and PERIPH_ID reads as 0x0.
|
|
|
|
Additionally, the SGRF configuration defines the manager thread state
|
|
after reset, so we must pulse the DMAC reset for the new settings to
|
|
take effect.
|
|
|
|
Based on community reverse-engineering of RK3399 SGRF registers:
|
|
- CON8[2]: DMAC0 manager thread state after reset (1=running)
|
|
- CON8[3]: DMAC0 manager thread security state (1=non-secure)
|
|
- CON8[4:15]: DMAC0 event/IRQ security state (1=non-secure)
|
|
- CON9[0:11]: DMAC0 peripheral security state (1=non-secure)
|
|
- Similar for DMAC1 in CON11-CON15
|
|
|
|
Signed-off-by: Armbian <[email protected]>
|
|
---
|
|
plat/rockchip/rk3399/drivers/secure/secure.c | 33 ++++++++++++++++++++
|
|
plat/rockchip/rk3399/drivers/secure/secure.h | 10 ++++++
|
|
2 files changed, 43 insertions(+)
|
|
|
|
diff --git a/plat/rockchip/rk3399/drivers/secure/secure.c b/plat/rockchip/rk3399/drivers/secure/secure.c
|
|
index 13c83ca1f..b195fe940 100644
|
|
--- a/plat/rockchip/rk3399/drivers/secure/secure.c
|
|
+++ b/plat/rockchip/rk3399/drivers/secure/secure.c
|
|
@@ -158,6 +158,39 @@ void secure_sgrf_init(void)
|
|
SGRF_SLV_S_WMSK | SGRF_SLV_S_ALL_NS);
|
|
mmio_write_32(SGRF_BASE + SGRF_SLV_SECURE_CON0_4(4),
|
|
SGRF_SLV_S_WMSK | SGRF_INTSRAM_S);
|
|
+
|
|
+ /*
|
|
+ * Configure DMAC0 and DMAC1 SGRF registers.
|
|
+ * Without this configuration, PL330 DMA controllers cannot be
|
|
+ * accessed from Linux and PERIPH_ID reads as 0x0.
|
|
+ */
|
|
+ /* DMAC0: manager running, non-secure, all events/IRQs non-secure */
|
|
+ mmio_write_32(SGRF_BASE + SGRF_SOC_CON(8),
|
|
+ REG_SOC_WMSK | SGRF_DMAC_CFG_NS);
|
|
+ /* DMAC0: all peripherals non-secure */
|
|
+ mmio_write_32(SGRF_BASE + SGRF_SOC_CON(9),
|
|
+ REG_SOC_WMSK | SGRF_DMAC_PERIPH_NS);
|
|
+
|
|
+ /* DMAC1: manager running, non-secure, all events/IRQs non-secure */
|
|
+ mmio_write_32(SGRF_BASE + SGRF_SOC_CON(11),
|
|
+ REG_SOC_WMSK | SGRF_DMAC_CFG_NS);
|
|
+ /* DMAC1: all peripherals non-secure */
|
|
+ mmio_write_32(SGRF_BASE + SGRF_SOC_CON(12),
|
|
+ REG_SOC_WMSK | SGRF_DMAC_PERIPH_NS);
|
|
+
|
|
+ /*
|
|
+ * Reset DMAC0 and DMAC1 to apply new SGRF configuration.
|
|
+ * The SGRF configuration defines the state after reset, so we
|
|
+ * must pulse the reset for the new settings to take effect.
|
|
+ */
|
|
+ /* Assert DMAC0 and DMAC1 reset */
|
|
+ mmio_write_32(CRU_BASE + CRU_SOFTRST_CON(10),
|
|
+ CRU_DMAC0_RST | CRU_DMAC1_RST);
|
|
+ /* Small delay to ensure reset is recognized */
|
|
+ udelay(1);
|
|
+ /* Deassert DMAC0 and DMAC1 reset */
|
|
+ mmio_write_32(CRU_BASE + CRU_SOFTRST_CON(10),
|
|
+ CRU_DMAC0_RST_RLS | CRU_DMAC1_RST_RLS);
|
|
}
|
|
|
|
void secure_sgrf_ddr_rgn_init(void)
|
|
diff --git a/plat/rockchip/rk3399/drivers/secure/secure.h b/plat/rockchip/rk3399/drivers/secure/secure.h
|
|
index 79997b2f6..91c4b2a30 100644
|
|
--- a/plat/rockchip/rk3399/drivers/secure/secure.h
|
|
+++ b/plat/rockchip/rk3399/drivers/secure/secure.h
|
|
@@ -40,6 +40,16 @@
|
|
|
|
#define SGRF_INTSRAM_S BIT(13)
|
|
|
|
+/*
|
|
+ * DMAC SGRF configuration:
|
|
+ * - bit[2]: manager thread state after reset (1=running, 0=halt)
|
|
+ * - bit[3]: manager thread security state (1=non-secure)
|
|
+ * - bit[4:15]: event/IRQ security state bits (1=non-secure)
|
|
+ * Set all to non-secure and running.
|
|
+ */
|
|
+#define SGRF_DMAC_CFG_NS (0xFFFC) /* bits 2-15 set */
|
|
+#define SGRF_DMAC_PERIPH_NS (0x0FFF) /* peripheral security bits */
|
|
+
|
|
/* ddr region */
|
|
#define SGRF_DDR_RGN_0_16_WMSK 0x0fff /* DDR RGN 0~16 size mask */
|
|
|
|
--
|
|
2.39.0
|
|
|