update ec25 detect

26pingpio-script/26pingpio-script.sh

@@ -1,52 +1,14 @@
 #/bin/bash
 
-###   GPIO 18 - LED high,  light on  ###
 ###   GPIO 17 - LED high,  light on  ###
-###   GPIO 62 - LED high,  light on  ###
-
-###   GPIO 81 - LED high,  light on  ###
-###   GPIO 80 - LED high,  light on  ###
-###   GPIO 50 - LED high,  light on  ###
-
-###   GPIO 30 - LED high,  light on  ###
-###   GPIO 29 - LED high,  light on  ###
-###   GPIO 31 - LED high,  light on  ###
-
-###   GPIO 59 - LED high,  light on  ###
-###   GPIO 58 - LED high,  light on  ###
-###   GPIO 51 - LED high,  light on  ###
-
-###   GPIO 61 - LED high,  light on  ###
-###   GPIO 60 - LED high,  light on  ###
-
-###   GPIO 53 - LED high,  light on  ###
-###   GPIO 28 - LED high,  light on  ###
-###   GPIO 52 - LED high,  light on  ###
+###   GPIO 18 - LED high,  light on  ###
+###   GPIO 20 - LED high,  light on  ###
 
 
 RET=0
-EXP_GPIO18=18
 EXP_GPIO17=17
-EXP_GPIO62=62
-
-EXP_GPIO81=81
-EXP_GPIO80=80
-EXP_GPIO50=50
-
-EXP_GPIO30=30
-EXP_GPIO29=29
-EXP_GPIO31=31
-
-EXP_GPIO59=59
-EXP_GPIO58=58
-EXP_GPIO51=51
-
-EXP_GPIO61=61
-EXP_GPIO60=60
-
-EXP_GPIO53=53
-EXP_GPIO28=28
-EXP_GPIO52=52
+EXP_GPIO18=18
+EXP_GPIO20=20
 
 sleep 2
 
@@ -58,176 +20,46 @@ echo "##########################################################################
 source `pwd`/mt_gpio.sh
 
 ####################################################################################################
-if [ ! -f /sys/class/gpio/gpio446/direction ]; then
-	        mt_gpio_export ${EXP_GPIO18}   ### EXP_GPIO18 428 + 18 = 446
-fi
-
-if [ ! -f /sys/class/gpio/gpio445/direction ]; then
-	        mt_gpio_export ${EXP_GPIO17}   ### EXP_GPIO17 428 + 17 = 445
-fi
-
-if [ ! -f /sys/class/gpio/gpio490/direction ]; then
-	        mt_gpio_export ${EXP_GPIO62}   ### EXP_GPIO62 428 + 62 = 490
-fi
-
-if [ ! -f /sys/class/gpio/gpio509/direction ]; then
-	        mt_gpio_export ${EXP_GPIO81}   ### EXP_GPIO81 428 + 81 = 509
-fi
-
-if [ ! -f /sys/class/gpio/gpio508/direction ]; then
-	        mt_gpio_export ${EXP_GPIO80}   ### EXP_GPIO80 428 + 80 = 508
-fi
-
-if [ ! -f /sys/class/gpio/gpio478/direction ]; then
-	        mt_gpio_export ${EXP_GPIO50}   ### EXP_GPIO50 428 + 50 = 478
-fi
-
-if [ ! -f /sys/class/gpio/gpio458/direction ]; then
-	        mt_gpio_export ${EXP_GPIO30}   ### EXP_GPIO30 428 + 30 = 458
-fi
-
-if [ ! -f /sys/class/gpio/gpio457/direction ]; then
-	        mt_gpio_export ${EXP_GPIO29}   ### EXP_GPIO29 428 + 29 = 457
-fi
-
-if [ ! -f /sys/class/gpio/gpio459/direction ]; then
-	        mt_gpio_export ${EXP_GPIO31}   ### EXP_GPIO31 428 + 31 = 459
-fi
-
-if [ ! -f /sys/class/gpio/gpio487/direction ]; then
-	        mt_gpio_export ${EXP_GPIO59}   ### EXP_GPIO59 428 + 59 = 487
-fi
-
-if [ ! -f /sys/class/gpio/gpio486/direction ]; then
-	        mt_gpio_export ${EXP_GPIO58}   ### EXP_GPIO58 428 + 58 = 486
-fi
-
-if [ ! -f /sys/class/gpio/gpio479/direction ]; then
-	        mt_gpio_export ${EXP_GPIO51}   ### EXP_GPIO51 428 + 51 = 479
+if [ ! -f /sys/class/gpio/gpio488/direction ]; then
+	        mt_gpio_export ${EXP_GPIO17}   ### EXP_GPIO17 471 + 17 = 488
 fi
 
 if [ ! -f /sys/class/gpio/gpio489/direction ]; then
-	        mt_gpio_export ${EXP_GPIO61}   ### EXP_GPIO61 428 + 61 = 489
+	        mt_gpio_export ${EXP_GPIO18}   ### EXP_GPIO18 471 + 18 = 489
 fi
 
-if [ ! -f /sys/class/gpio/gpio488/direction ]; then
-	        mt_gpio_export ${EXP_GPIO60}   ### EXP_GPIO60 428 + 60 = 488
+if [ ! -f /sys/class/gpio/gpio491/direction ]; then
+	        mt_gpio_export ${EXP_GPIO20}   ### EXP_GPIO20 471 + 20 = 491
 fi
 
-if [ ! -f /sys/class/gpio/gpio481/direction ]; then
-	        mt_gpio_export ${EXP_GPIO53}   ### EXP_GPIO53 428 + 53 = 481
-fi
-
-if [ ! -f /sys/class/gpio/gpio456/direction ]; then
-	        mt_gpio_export ${EXP_GPIO28}   ### EXP_GPIO28 428 + 28 = 456
-fi
-
-if [ ! -f /sys/class/gpio/gpio480/direction ]; then
-	        mt_gpio_export ${EXP_GPIO52}   ### EXP_GPIO52 428 + 52 = 480
-fi
-
-
 ####################################################################################################
-mt_gpio_dir   ${EXP_GPIO18}  out
 mt_gpio_dir   ${EXP_GPIO17}  out
-mt_gpio_dir   ${EXP_GPIO62}  out
-
-mt_gpio_dir   ${EXP_GPIO81}  out
-mt_gpio_dir   ${EXP_GPIO80}  out
-mt_gpio_dir   ${EXP_GPIO50}  out
-
-mt_gpio_dir   ${EXP_GPIO30}  out
-mt_gpio_dir   ${EXP_GPIO29}  out
-mt_gpio_dir   ${EXP_GPIO31}  out
-
-mt_gpio_dir   ${EXP_GPIO59}  out
-mt_gpio_dir   ${EXP_GPIO58}  out
-mt_gpio_dir   ${EXP_GPIO51}  out
-
-mt_gpio_dir   ${EXP_GPIO61}  out
-mt_gpio_dir   ${EXP_GPIO60}  out
-
-mt_gpio_dir   ${EXP_GPIO53}  out
-mt_gpio_dir   ${EXP_GPIO28}  out
-mt_gpio_dir   ${EXP_GPIO52}  out
+mt_gpio_dir   ${EXP_GPIO18}  out
 
+mt_gpio_dir   ${EXP_GPIO20}  out
 
 ####################################################################################################
 echo "########################## 26PIN GPIO Expand Board Testing Start ##########################"
 
 echo "###  26PIN Expand Board's all LED turn on about 10s   ###"
-mt_gpio_out   ${EXP_GPIO18}  1
 mt_gpio_out   ${EXP_GPIO17}  1
-mt_gpio_out   ${EXP_GPIO62}  1
+mt_gpio_out   ${EXP_GPIO18}  1
 
-mt_gpio_out   ${EXP_GPIO81}  1
-mt_gpio_out   ${EXP_GPIO80}  1
-mt_gpio_out   ${EXP_GPIO50}  1
-
-mt_gpio_out   ${EXP_GPIO30}  1
-mt_gpio_out   ${EXP_GPIO29}  1
-mt_gpio_out   ${EXP_GPIO31}  1
-
-mt_gpio_out   ${EXP_GPIO59}  1
-mt_gpio_out   ${EXP_GPIO58}  1
-mt_gpio_out   ${EXP_GPIO51}  1
-
-mt_gpio_out   ${EXP_GPIO61}  1
-mt_gpio_out   ${EXP_GPIO60}  1
-
-mt_gpio_out   ${EXP_GPIO53}  1
-mt_gpio_out   ${EXP_GPIO28}  1
-mt_gpio_out   ${EXP_GPIO52}  1
+mt_gpio_out   ${EXP_GPIO20}  1
 
 sleep 10
 echo "###  26PIN Expand Board's all LED turn off about 5s   ###"
-mt_gpio_out   ${EXP_GPIO18}  0
 mt_gpio_out   ${EXP_GPIO17}  0
-mt_gpio_out   ${EXP_GPIO62}  0
+mt_gpio_out   ${EXP_GPIO18}  0
 
-mt_gpio_out   ${EXP_GPIO81}  0
-mt_gpio_out   ${EXP_GPIO80}  0
-mt_gpio_out   ${EXP_GPIO50}  0
-
-mt_gpio_out   ${EXP_GPIO30}  0
-mt_gpio_out   ${EXP_GPIO29}  0
-mt_gpio_out   ${EXP_GPIO31}  0
-
-mt_gpio_out   ${EXP_GPIO59}  0
-mt_gpio_out   ${EXP_GPIO58}  0
-mt_gpio_out   ${EXP_GPIO51}  0
-
-mt_gpio_out   ${EXP_GPIO61}  0
-mt_gpio_out   ${EXP_GPIO60}  0
-
-mt_gpio_out   ${EXP_GPIO53}  0
-mt_gpio_out   ${EXP_GPIO28}  0
-mt_gpio_out   ${EXP_GPIO52}  0
+mt_gpio_out   ${EXP_GPIO20}  0
 
 sleep 5
 echo "###  26PIN Expand Board's all LED turn on  ###"
-mt_gpio_out   ${EXP_GPIO18}  1
 mt_gpio_out   ${EXP_GPIO17}  1
-mt_gpio_out   ${EXP_GPIO62}  1
+mt_gpio_out   ${EXP_GPIO18}  1
 
-mt_gpio_out   ${EXP_GPIO81}  1
-mt_gpio_out   ${EXP_GPIO80}  1
-mt_gpio_out   ${EXP_GPIO50}  1
-
-mt_gpio_out   ${EXP_GPIO30}  1
-mt_gpio_out   ${EXP_GPIO29}  1
-mt_gpio_out   ${EXP_GPIO31}  1
-
-mt_gpio_out   ${EXP_GPIO59}  1
-mt_gpio_out   ${EXP_GPIO58}  1
-mt_gpio_out   ${EXP_GPIO51}  1
-
-mt_gpio_out   ${EXP_GPIO61}  1
-mt_gpio_out   ${EXP_GPIO60}  1
-
-mt_gpio_out   ${EXP_GPIO53}  1
-mt_gpio_out   ${EXP_GPIO28}  1
-mt_gpio_out   ${EXP_GPIO52}  1
+mt_gpio_out   ${EXP_GPIO20}  1
 
 
 sleep 2

26pingpio-script/mt_gpio.sh

@@ -4,7 +4,7 @@ SYS_FILE=/sys/class/gpio
 mt_gpio_export()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
 
    if [ ! -f ${SYS_FILE}/export ]; then
        echo "${SYS_FILE}/export file is not present"
@@ -19,7 +19,7 @@ mt_gpio_export()
 mt_gpio_dir()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    dir=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/direction ]; then
@@ -35,7 +35,7 @@ mt_gpio_dir()
 mt_gpio_out()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    out=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
@@ -51,7 +51,7 @@ mt_gpio_out()
 mt_gpio_in()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
        echo "${SYS_FILE}/gpio${pin}/value is not present"

app_ft-script.sh

@@ -1,9 +1,9 @@
 #/bin/bash
 
-###  This tool is for BPI-R4 function test in manufacturer  ###
+###  This tool is for BPI-RV2 function test in manufacturer  ###
 RET=0
 PREFIX=`pwd`/
-DEUBGFILE=/var/run/r4-ft-script.log
+DEUBGFILE=/var/run/rv2-ft-script.log
 
 AUTOMATIC_CASE_NUM=0
 MANUAL_CASE_NUM=0
@@ -15,7 +15,7 @@ echo " "
 echo " "
 echo "######################################################################################"
 
-echo "########################  BPI-R4 Function Testing Start  ########################"
+echo "########################  BPI-RV2 Function Testing Start  ########################"
 ###  Sets QUIT variable so script will finish.  ###
 quit()
 {
@@ -78,73 +78,46 @@ run_script()
 step_automatic_func()
 {
 	TITLE="Automatic Test Cases"
-	AUTOMATIC_CASE_NUM=9
-	CASE_NUM=9
+	AUTOMATIC_CASE_NUM=5
+	CASE_NUM=5
 
 	TEXT_1="Memory_Test_Case"
 	FUNC_1="memory-script"
 
-	TEXT_2="WIFI_Test_Case"
-	FUNC_2="wifi-script"
+	TEXT_2="miniPCIeX2_Test_Case"
+	FUNC_2="minipciex2-script"
 
-	TEXT_3="miniPCIeX2_Test_Case"
-	FUNC_3="minipciex2-script"
+	TEXT_3="miniPCIeUSB_Test_Case"
+	FUNC_3="minipcieusb-script"
 
-	TEXT_4="miniPCIeUSB_Test_Case"
-	FUNC_4="minipcieusb-script"
+	TEXT_4="NOR_Test_sase"
+	FUNC_4="nor-script"
 
-	TEXT_5="NVME_Test_Case"
-	FUNC_5="nvme-script"
-
-	TEXT_6="NAND_Test_sase"
-	FUNC_6="nand-script"
-
-	TEXT_7="EMMC_Test_sase"
-	FUNC_7="emmc-script"
-
-	TEXT_8="RTC_Test_sase"
-	FUNC_8="rtc-script"
-
-	TEXT_9="EEPROM_Test_sase"
-	FUNC_9="eeprom-script"
+	TEXT_5="RTC_Test_sase"
+	FUNC_5="rtc-script"
 }
 
 ###  Options for manual test cases  ###
 step_manual_func()
 {
 	TITLE="Manual Test Cases"
-	MANUAL_CASE_NUM=10
-	CASE_NUM=10
+	MANUAL_CASE_NUM=5
+	CASE_NUM=5
 
-	TEXT_1="FAN_Test_Case"
-	FUNC_1="fan-script"
+	TEXT_1="USB20_Test_Case"
+	FUNC_1="usb20-script"
 
-	TEXT_2="LED_Test_Case"
-	FUNC_2="led-script"
+	TEXT_2="Ethernet_Test_Case"
+	FUNC_2="ethernet-script"
 
-	TEXT_3="KEY_Test_Case"
-	FUNC_3="key-script"
+	TEXT_3="26PINGPIO_Test_Case"
+	FUNC_3="26pingpio-script"
 
-	TEXT_4="USB30_Test_Case"
-	FUNC_4="usb30-script"
+	TEXT_4="M2KeyB_PCIE_Test_Case"
+	FUNC_4="m2keybpcie-script"
 
-	TEXT_5="USB20_Test_Case"
-	FUNC_5="usb20-script"
-
-	TEXT_6="Ethernet_Test_Case"
-	FUNC_6="ethernet-script"
-
-	TEXT_7="26PINGPIO_Test_Case"
-	FUNC_7="26pingpio-script"
-
-	TEXT_8="M2KeyB_PCIE_Test_Case"
-	FUNC_8="m2keybpcie-script"
-
-	TEXT_9="M2KeyB_USB2_Test_Case"
-	FUNC_9="m2keybusb2-script"
-
-	TEXT_10="M2KeyB_USB3_Test_Case"
-	FUNC_10="m2keybusb3-script"
+	TEXT_5="M2KeyB_USB_Test_Case"
+	FUNC_5="m2keybusb-script"
 }
 
 STEPS_1="step_automatic_func"

eeprom-script/eeprom-script.sh

@@ -1,23 +0,0 @@
-#/bin/bash
-
-SYS_FILE=/sys/devices/platform/11005000.i2c/i2c-1
-RET=0
-
-echo " "
-echo " "
-echo " "
-echo "######################################################################################"
-echo "######################  BPI-R4 EEPROM 0x57 Testing Start  ############################"
-
-if [ ! -f ${SYS_FILE}/i2c-2/2-0057/eeprom ]; then
-	echo "###  BPI-R4 eeprom 0x57 can't work fine ###"
-	RET=1
-else
-	echo "###  BPI-R4 eeprom 0x57 can work fine ###"
-fi
-
-echo "######################################################################################"
-sleep 1
-
-return ${RET}
-

ethernet-script/ethernet-script.sh

@@ -9,13 +9,14 @@ echo " "
 echo " "
 echo "######################################################################################"
 
+ifconfig eth4 	 up
+ifconfig eth5 	 up
 ifconfig eth0 	 up
 ifconfig eth1 	 up
 ifconfig eth2    up
+ifconfig eth3    up
 ifconfig br-lan  down
-ifconfig br-wan  down
 brctl delbr br-lan
-brctl delbr br-wan
 sleep 2
 
 echo "########################## Network ethernet Testing Start ##########################"
@@ -33,21 +34,21 @@ done
 
 echo "----------------------------------------------------------------------------------------"
 sleep 3
-echo "###  Ethernet 10G SFP+ WAN Testing ####"
-udhcpc -t 5 -n -i eth2
+echo "###  Ethernet 2.5G RJ45 WAN Testing ####"
+udhcpc -t 5 -n -i eth4
 if [ $? == 0 ]; then
-	echo "###  Ethernet 10G SFP+ WAN DHCP got ip address successfully  ###"
+	echo "###  Ethernet 2.5G RJ45 WAN DHCP got ip address successfully  ###"
 else
 	RET=1
-	echo "Error Notice: Ethernet 10G SFP+ WAN DHCP can not got ip address failure"
+	echo "Error Notice: Ethernet 2.5G RJ45 WAN DHCP can not got ip address failure"
 fi
 
 echo "----------------------------------------------------------------------------------------"
 sleep 3
-echo "###  Ethernet 10G SFP+ LAN Testing ####"
-udhcpc -t 5 -n -i eth1
+echo "###  Ethernet 1G RJ45 LAN Testing ####"
+udhcpc -t 5 -n -i eth5
 if [ $? == 0 ]; then
-	echo "###  Ethernet 10G SFP+ LAN DHCP got ip address successfully  ###"
+	echo "###  Ethernet 1G SFP+ LAN DHCP got ip address successfully  ###"
 else
 	RET=1
 	echo "Error Notice: Ethernet 10G SFP+ LAN DHCP can not got ip address failure"
@@ -55,46 +56,46 @@ fi
 
 echo "----------------------------------------------------------------------------------------"
 sleep 3
-echo "###  Ethernet 1G RJ45 LAN 0 Testing ####"
-udhcpc -t 5 -n -i lan0
+echo "###  Ethernet 1G RJ45 ETH 0 Testing ####"
+udhcpc -t 5 -n -i eth0
 if [ $? == 0 ]; then
-	echo "###  Ethernet 1G RJ45 LAN 0 DHCP got ip address successfully  ###"
+	echo "###  Ethernet 1G RJ45 ETH 0 DHCP got ip address successfully  ###"
 else
 	RET=1
-	echo "Error Notice: Ethernet 1G RJ45 LAN 0 DHCP can not got ip address failure"
+	echo "Error Notice: Ethernet 1G RJ45 ETH 0 DHCP can not got ip address failure"
 fi
 
 echo "----------------------------------------------------------------------------------------"
 sleep 3
-echo "###  Ethernet 1G RJ45 LAN 1 Testing ####"
-udhcpc -t 5 -n -i lan1
+echo "###  Ethernet 1G RJ45 ETH 1 Testing ####"
+udhcpc -t 5 -n -i eth1
 if [ $? == 0 ]; then
-	echo "###  Ethernet 1G RJ45 LAN 1 DHCP got ip address successfully  ###"
+	echo "###  Ethernet 1G RJ45 ETH 1 DHCP got ip address successfully  ###"
 else
 	RET=1
-	echo "Error Notice: Ethernet 1G RJ45 LAN 1 DHCP can not got ip address failure"
+	echo "Error Notice: Ethernet 1G RJ45 ETH 1 DHCP can not got ip address failure"
 fi
 
 echo "----------------------------------------------------------------------------------------"
 sleep 3
-echo "###  Ethernet 1G RJ45 LAN 2 Testing ####"
-udhcpc -t 5 -n -i lan2
+echo "###  Ethernet 1G RJ45 ETH 2 Testing ####"
+udhcpc -t 5 -n -i eth2
 if [ $? == 0 ]; then
-	echo "###  Ethernet 1G RJ45 LAN 2 DHCP got ip address successfully  ###"
+	echo "###  Ethernet 1G RJ45 ETH 2 DHCP got ip address successfully  ###"
 else
 	RET=1
-	echo "Error Notice: Ethernet 1G RJ45 LAN 2 DHCP can not got ip address failure"
+	echo "Error Notice: Ethernet 1G RJ45 ETH 2 DHCP can not got ip address failure"
 fi
 
 echo "----------------------------------------------------------------------------------------"
 sleep 3
-echo "###  Ethernet 1G RJ45 LAN 3 Testing ####"
-udhcpc -t 5 -n -i lan3
+echo "###  Ethernet 1G RJ45 ETH 3 Testing ####"
+udhcpc -t 5 -n -i eth3
 if [ $? == 0 ]; then
-        echo "###  Ethernet 1G RJ45 LAN 3 DHCP got ip address successfully  ###"
+        echo "###  Ethernet 1G RJ45 ETH 3 DHCP got ip address successfully  ###"
 else
         RET=1
-        echo "Error Notice: Ethernet 1G RJ45 LAN 3 DHCP can not got ip address failure"
+        echo "Error Notice: Ethernet 1G RJ45 ETH 3 DHCP can not got ip address failure"
 fi
 
 echo "######################################################################################"

fan-script/fan-script.sh

@@ -1,64 +0,0 @@
-#/bin/bash
-
-RET=0
-sleep 2
-
-echo " " 
-echo " "
-echo " "
-echo "######################################################################################"
-echo "##########################      FAN PWM Testing Start       ##########################"
-
-echo 0 > /sys/class/pwm/pwmchip0/export 2> /dev/null
-echo 10000 > /sys/class/pwm/pwmchip0/pwm0/period 2> /dev/null
-echo 5000 >  /sys/class/pwm/pwmchip0/pwm0/duty_cycle 2> /dev/null
-echo normal > /sys/class/pwm/pwmchip0/pwm0/polarity 2> /dev/null
-echo 1 > /sys/class/pwm/pwmchip0/pwm0/enable 2> /dev/null
-sleep 1
-
-echo "###  Turn off the FAN about 5s by PWM0 ###"
-echo 10000 >  /sys/class/pwm/pwmchip0/pwm0/duty_cycle 2> /dev/null
-sleep 5
-
-echo "###  Turn on the FAN about 10s by PWM0  ###"
-#echo 5000 >  /sys/class/pwm/pwmchip0/pwm0/duty_cycle 2> /dev/null
-echo 0 >  /sys/class/pwm/pwmchip0/pwm0/duty_cycle 2> /dev/null
-sleep 10
-
-echo "###  Turn off the FAN completely ###"
-echo 10000 >  /sys/class/pwm/pwmchip0/pwm0/duty_cycle 2> /dev/null
-
-while true
-do
-	read -t20 -s -n1  -p "### Please confirm if the FAN can work fine, enter y or n. "y" is good, "n" is for bad. ###" keypress
-	if [ $? -eq 0 ]; then
-		if [ ${keypress} == 'y' ]; then
-			echo " "
-			echo " "
-			echo "###  FAN can work fine, FAN feature is good  ### "
-			break
-  		fi
-
-		if [ ${keypress} == 'n' ]; then
-			RET=1
-			echo " "
-			echo " "
-			echo "Error Notice: FAN can not work fine, FAN feature is bad"
-			break
-		fi
-	fi
-	
-	echo " "
-done
-
-echo 0 > /sys/class/pwm/pwmchip0/unexport 2> /dev/null
-
-echo "######################################################################################"
-echo " "
-echo " "
-echo " "
-
-sleep 2
-
-exit ${RET}
-

key-script/key-script.sh

@@ -1,52 +0,0 @@
-#/bin/bash
-
-RET=0
-KEY_GPIO_WPS=14
-
-sleep 2
-
-echo " " 
-echo " "
-echo " "
-echo "######################################################################################"
-
-source `pwd`/mt_gpio.sh
-
-echo "########################## KEY Testing Start ##########################"
-
-if [ ! -f /sys/class/gpio/gpio442/direction ]; then
-	mt_gpio_export ${KEY_GPIO_WPS}   #Enable WPS 428 + 14 = 442
-fi
-
-mt_gpio_dir   ${KEY_GPIO_WPS}  in
-
-echo -n "Please Press one Key about WPS Key of GPIO_WPS GPIO14 about 20s  ......"
-
-i=0
-while true; do
-        mt_gpio_in ${KEY_GPIO_WPS}
-        if [ $? == 0 ]; then
-                echo "###  GPIO_WPS GPIO14 Key is in low level, Key is available  ###"
-                break
-        else
-                echo "waiting 1 second......"
-                sleep 1
-        fi
-
-        let i=i+1
-        if [ $i -ge 20 ]; then
-                echo " ###  20s Wait time is over, it can not detect the key  ###"
-                RET=1
-                break
-        fi
-done
-
-echo "######################################################################################"
-echo " "
-echo " "
-echo " "
-
-sleep 2
-
-return ${RET}
-

led-script/led-script.sh

@@ -1,58 +0,0 @@
-#/bin/bash
-
-RET=0
-
-sleep 2
-
-echo " " 
-echo " "
-echo " "
-echo "######################################################################################"
-echo "########################## LED Testing Start ##########################"
-
-echo "###  all GREEN-LED BLUE-LED turn on about 10s   ###"
-echo 1 > /sys/class/leds/bpi-r4\:pio\:blue/brightness
-echo 1 > /sys/class/leds/bpi-r4\:pio\:green/brightness
-sleep 10
-
-echo "###  all GREEN-LED BLUE-LED turn off about 5s   ###"
-echo 0 > /sys/class/leds/bpi-r4\:pio\:blue/brightness
-echo 0 > /sys/class/leds/bpi-r4\:pio\:green/brightness
-sleep 5
-
-echo "###  all GREEN-LED BLUE-LED1 turn on  ###"
-echo 1 > /sys/class/leds/bpi-r4\:pio\:blue/brightness
-echo 1 > /sys/class/leds/bpi-r4\:pio\:green/brightness
-
-while true
-do
-	read -t20 -s -n1  -p "### Please confirm if the LED can work fine, enter y or n. "y" is good, "n" is for bad. ###" keypress
-	if [ $? -eq 0 ]; then
-		if [ ${keypress} == 'y' ]; then
-			echo " "
-			echo " "
-			echo "###  LED can work fine, LED feature is good  ### "
-			break
-		fi
-
-		if [ ${keypress} == 'n' ]; then
-			RET=1
-			echo " "
-			echo " "
-			echo "Error Notice: LED can not work fine, LED feature is bad"
-			break
-		fi
-	fi
-
-	echo " "
-done
-
-echo "######################################################################################"
-echo " "
-echo " "
-echo " "
-
-sleep 2
-
-return ${RET}
-

led-script/mt_gpio.sh

@@ -1,67 +0,0 @@
-
-SYS_FILE=/sys/class/gpio
-
-mt_gpio_export()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
-
-   if [ ! -f ${SYS_FILE}/export ]; then
-       echo "${SYS_FILE}/export file is not present"
-       exit 1
-   fi
-
-   echo "${pin}" > ${SYS_FILE}/export
-
-   return 0   
-}
-
-mt_gpio_dir()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
-   dir=$2
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/direction ]; then
-       echo "${SYS_FILE}/gpio${pin}/direction is not present"
-       exit 1
-   fi
-
-   echo "${dir}" > ${SYS_FILE}/gpio${pin}/direction
-
-   return 0   
-}
-
-mt_gpio_out()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
-   out=$2
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
-       echo "${SYS_FILE}/gpio${pin}/value is not present"
-       exit 1
-   fi
-
-   echo "${out}" > ${SYS_FILE}/gpio${pin}/value
-
-   return 0   
-}
-
-mt_gpio_in()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
-       echo "${SYS_FILE}/gpio${pin}/value is not present"
-       exit 1
-   fi
-
-   result=`cat ${SYS_FILE}/gpio${pin}/value`
-   if [ ${result} == "0" ] ; then
-       return 0
-   else
-       return 1
-   fi
-}

m2keybpcie-script/m2keybpcie-script.sh

@@ -11,7 +11,7 @@ echo "##########################################################################
 echo "####################  M.2 KeyB PCIe SATA card Module Testing Start  ##################"
 echo " "
 
-result=`lspci | grep "SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller" | wc -l`
+result=`lspci | grep "Non-Volatile memory controller: Intel Corporation NVMe Optane Memory Series" | wc -l`
 if [ ${result} -eq 1 ]; then
 	echo "###  Find one M.2 KeyB PCIe SATA card Module from M.2 KeyB slots  ###"
 else

m2keybpcie-script/mt_gpio.sh

@@ -4,7 +4,7 @@ SYS_FILE=/sys/class/gpio
 mt_gpio_export()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
 
    if [ ! -f ${SYS_FILE}/export ]; then
        echo "${SYS_FILE}/export file is not present"
@@ -19,7 +19,7 @@ mt_gpio_export()
 mt_gpio_dir()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    dir=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/direction ]; then
@@ -35,7 +35,7 @@ mt_gpio_dir()
 mt_gpio_out()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    out=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
@@ -51,7 +51,7 @@ mt_gpio_out()
 mt_gpio_in()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
        echo "${SYS_FILE}/gpio${pin}/value is not present"

m2keybusb-script/mt_gpio.sh

@@ -4,7 +4,7 @@ SYS_FILE=/sys/class/gpio
 mt_gpio_export()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
 
    if [ ! -f ${SYS_FILE}/export ]; then
        echo "${SYS_FILE}/export file is not present"
@@ -19,7 +19,7 @@ mt_gpio_export()
 mt_gpio_dir()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    dir=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/direction ]; then
@@ -35,7 +35,7 @@ mt_gpio_dir()
 mt_gpio_out()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    out=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
@@ -51,7 +51,7 @@ mt_gpio_out()
 mt_gpio_in()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
        echo "${SYS_FILE}/gpio${pin}/value is not present"

m2keybusb2-script/mt_gpio.sh

@@ -1,67 +0,0 @@
-
-SYS_FILE=/sys/class/gpio
-
-mt_gpio_export()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
-
-   if [ ! -f ${SYS_FILE}/export ]; then
-       echo "${SYS_FILE}/export file is not present"
-       exit 1
-   fi
-
-   echo "${pin}" > ${SYS_FILE}/export
-
-   return 0   
-}
-
-mt_gpio_dir()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
-   dir=$2
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/direction ]; then
-       echo "${SYS_FILE}/gpio${pin}/direction is not present"
-       exit 1
-   fi
-
-   echo "${dir}" > ${SYS_FILE}/gpio${pin}/direction
-
-   return 0   
-}
-
-mt_gpio_out()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
-   out=$2
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
-       echo "${SYS_FILE}/gpio${pin}/value is not present"
-       exit 1
-   fi
-
-   echo "${out}" > ${SYS_FILE}/gpio${pin}/value
-
-   return 0   
-}
-
-mt_gpio_in()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
-       echo "${SYS_FILE}/gpio${pin}/value is not present"
-       exit 1
-   fi
-
-   result=`cat ${SYS_FILE}/gpio${pin}/value`
-   if [ ${result} == "0" ] ; then
-       return 0
-   else
-       return 1
-   fi
-}

m2keybusb3-script/m2keybusb3-script.sh

@@ -1,29 +0,0 @@
-#/bin/bash
-
-RET=0
-
-sleep 2
-
-echo " " 
-echo " "
-echo " "
-echo "######################################################################################"
-echo "###########################  M.2 KeyB USB3.0 Testing Start  ##########################"
-
-result=`lsusb | grep "2c7c:0900" | wc -l`
-if [ ${result} -eq 1 ]; then
-	echo "###  Find one RM500U-CN 5G Module from M.2 KeyB slots  ###"
-else
-	echo "Error Notice: Can not Find one RM500U-CN 5G Module from M.2 KeyB slots"
-	RET=1
-fi
-
-echo "######################################################################################"
-echo " "
-echo " "
-echo " "
-
-sleep 2
-
-return ${RET}
-

m2keybusb3-script/mt_gpio.sh

@@ -1,67 +0,0 @@
-
-SYS_FILE=/sys/class/gpio
-
-mt_gpio_export()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
-
-   if [ ! -f ${SYS_FILE}/export ]; then
-       echo "${SYS_FILE}/export file is not present"
-       exit 1
-   fi
-
-   echo "${pin}" > ${SYS_FILE}/export
-
-   return 0   
-}
-
-mt_gpio_dir()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
-   dir=$2
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/direction ]; then
-       echo "${SYS_FILE}/gpio${pin}/direction is not present"
-       exit 1
-   fi
-
-   echo "${dir}" > ${SYS_FILE}/gpio${pin}/direction
-
-   return 0   
-}
-
-mt_gpio_out()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
-   out=$2
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
-       echo "${SYS_FILE}/gpio${pin}/value is not present"
-       exit 1
-   fi
-
-   echo "${out}" > ${SYS_FILE}/gpio${pin}/value
-
-   return 0   
-}
-
-mt_gpio_in()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
-       echo "${SYS_FILE}/gpio${pin}/value is not present"
-       exit 1
-   fi
-
-   result=`cat ${SYS_FILE}/gpio${pin}/value`
-   if [ ${result} == "0" ] ; then
-       return 0
-   else
-       return 1
-   fi
-}

memory-script/mt_gpio.sh

@@ -4,7 +4,7 @@ SYS_FILE=/sys/class/gpio
 mt_gpio_export()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
 
    if [ ! -f ${SYS_FILE}/export ]; then
        echo "${SYS_FILE}/export file is not present"
@@ -19,7 +19,7 @@ mt_gpio_export()
 mt_gpio_dir()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    dir=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/direction ]; then
@@ -35,7 +35,7 @@ mt_gpio_dir()
 mt_gpio_out()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    out=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
@@ -51,7 +51,7 @@ mt_gpio_out()
 mt_gpio_in()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
        echo "${SYS_FILE}/gpio${pin}/value is not present"

minipcieusb-script/minipcieusb-script.sh

@@ -10,11 +10,11 @@ echo " "
 echo "######################################################################################"
 echo "#########################  minipcie 4G Module Testing Start  #########################"
 
-result=`lsusb | grep "2c7c:0125" | wc -l`
-if [ ${result} -eq 2 ]; then
-	echo "###  Find two EC25 4G Modules from two minipcie slots  ###"
+result=`lsusb | grep "2c7c:0125 Android Android" | wc -l`
+if [ ${result} -eq 1 ]; then
+	echo "###  Find 1 EC25 4G Modules from two minipcie slots  ###"
 else
-	echo "Error Notice: Can not Find two EC25 4G Modules from two minipcie slots"
+	echo "Error Notice: Can not Find EC25 4G Modules from two minipcie slots"
 	RET=1
 fi
 

minipcieusb-script/mt_gpio.sh

@@ -4,7 +4,7 @@ SYS_FILE=/sys/class/gpio
 mt_gpio_export()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
 
    if [ ! -f ${SYS_FILE}/export ]; then
        echo "${SYS_FILE}/export file is not present"
@@ -19,7 +19,7 @@ mt_gpio_export()
 mt_gpio_dir()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    dir=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/direction ]; then
@@ -35,7 +35,7 @@ mt_gpio_dir()
 mt_gpio_out()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    out=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
@@ -51,7 +51,7 @@ mt_gpio_out()
 mt_gpio_in()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
        echo "${SYS_FILE}/gpio${pin}/value is not present"

minipciex2-script/minipciex2-script.sh

@@ -9,39 +9,17 @@ echo " "
 echo " "
 echo " "
 echo "######################################################################################"
-echo "########################  minipcie wifi7 card Module Testing Start  ##################"
+echo "########################  minipcie to sata Module Testing Start  ##################"
 echo " "
 
-result=`lspci | grep "Device 7990" | wc -l`
+result=`lspci | grep "Device 1a0a:abcd" | wc -l`
 if [ ${result} -eq 1 ]; then
-	echo "###  Find one MEDIATEK Corp MT7990 Module from minipcie slots  ###"
+	echo "###  Find one ASM1062 Serial ATA Controller from minipcie slots  ###"
 else
-	echo "Error Notice: Can not Find one EDIATEK Corp MT7990 Module from minipcie slot"
+	echo "Error Notice: Can not Find one ASM1062 Serial ATA Controller from minipcie slot"
 	RET=1
 fi
 
-result=`lspci | grep "Device 7991" | wc -l`
-if [ ${result} -eq 1 ]; then
-	echo "###  Find one MEDIATEK Corp MT7991 Module from minipcie slots  ###"
-else
-	echo "Error Notice: Can not Find one EDIATEK Corp MT7991 Module from minipcie slot"
-	RET=1
-fi
-
-if [ ! -f ${SYS_FILE}/i2c-5/5-0051/eeprom ]; then
-	echo "###  BPI-R4 wifi7 eeprom 0x51 can't work fine ###"
-	RET=1
-else
-	echo "###  BPI-R4 wifi7 eeprom 0x51 can work fine ###"
-fi
-
-if [ ! -f ${SYS_FILE}/i2c-5/5-0052/eeprom ]; then
-	echo "###  BPI-R4 wifi7 eeprom 0x52 can't work fine ###"
-	RET=1
-else
-	echo "###  BPI-R4 wifi7 eeprom 0x52 can work fine ###"
-fi
-
 echo " "
 echo "######################################################################################"
 echo " "

minipciex2-script/mt_gpio.sh

@@ -4,7 +4,7 @@ SYS_FILE=/sys/class/gpio
 mt_gpio_export()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
 
    if [ ! -f ${SYS_FILE}/export ]; then
        echo "${SYS_FILE}/export file is not present"
@@ -19,7 +19,7 @@ mt_gpio_export()
 mt_gpio_dir()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    dir=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/direction ]; then
@@ -35,7 +35,7 @@ mt_gpio_dir()
 mt_gpio_out()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    out=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
@@ -51,7 +51,7 @@ mt_gpio_out()
 mt_gpio_in()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
        echo "${SYS_FILE}/gpio${pin}/value is not present"

nand-script/nand-script.sh

@@ -1,29 +0,0 @@
-#/bin/bash
-
-RET=0
-
-sleep 2
-
-echo " " 
-echo " "
-echo " "
-echo "######################################################################################"
-echo "##########################  SPIM NAND Deivce Testing Start  ##########################"
-
-dd if=/dev/mtdblock2 of=/tmp/.nand_test.img
-if [ $? == 0 ]; then
-    echo "###  Access the SPIM NAND Device Successfully ###"
-else
-    RET=1
-    echo "Error Notice: Access the SPIM NAND Device failure ###"
-fi
-
-echo "######################################################################################"
-echo " "
-echo " "
-echo " "
-
-sleep 2
-
-return ${RET}
-

nor-script/nor-script.sh

@@ -8,15 +8,14 @@ echo " "
 echo " "
 echo " "
 echo "######################################################################################"
+echo "##########################     NOR Flash Device Testing Start     #####################"
 
-echo "########################## EMMC Deivce Testing Start ##########################"
-
-dd if=/dev/mmcblk0boot0 of=/tmp/.emmc_test.img bs=1M count=1
+dd if=/dev/mtdblock3 of=/tmp/.nor_test.img bs=1M count=1
 if [ $? == 0 ]; then
-    echo "###  Access the EMMC Device Successfully ###"
+    echo "###  Access the NOR Flash Device Successfully ###"
 else
     RET=1
-    echo "Error Notice: Access the EMMC Device failure ###"
+    echo "Error Notice: Access the NOR Flash Device failed ###"
 fi
 
 echo "######################################################################################"
@@ -26,5 +25,4 @@ echo " "
 
 sleep 2
 
-return ${RET}
-
+exit ${RET}

nvme-script/mt_gpio.sh

@@ -1,67 +0,0 @@
-
-SYS_FILE=/sys/class/gpio
-
-mt_gpio_export()
-{
-   pin=$1
-   let pin=pin+411   ### gpio base 411 ###
-
-   if [ ! -f ${SYS_FILE}/export ]; then
-       echo "${SYS_FILE}/export file is not present"
-       exit 1
-   fi
-
-   echo "${pin}" > ${SYS_FILE}/export
-
-   return 0   
-}
-
-mt_gpio_dir()
-{
-   pin=$1
-   let pin=pin+411   ### gpio base 411 ###
-   dir=$2
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/direction ]; then
-       echo "${SYS_FILE}/gpio${pin}/direction is not present"
-       exit 1
-   fi
-
-   echo "${dir}" > ${SYS_FILE}/gpio${pin}/direction
-
-   return 0   
-}
-
-mt_gpio_out()
-{
-   pin=$1
-   let pin=pin+411   ### gpio base 411 ###
-   out=$2
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
-       echo "${SYS_FILE}/gpio${pin}/value is not present"
-       exit 1
-   fi
-
-   echo "${out}" > ${SYS_FILE}/gpio${pin}/value
-
-   return 0   
-}
-
-mt_gpio_in()
-{
-   pin=$1
-   let pin=pin+411   ### gpio base 411 ###
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
-       echo "${SYS_FILE}/gpio${pin}/value is not present"
-       exit 1
-   fi
-
-   result=`cat ${SYS_FILE}/gpio${pin}/value`
-   if [ ${result} == "0" ] ; then
-       return 0
-   else
-       return 1
-   fi
-}

nvme-script/nvme-script.sh

@@ -1,29 +0,0 @@
-#/bin/bash
-
-RET=0
-
-sleep 2
-
-echo " " 
-echo " "
-echo " "
-echo "######################################################################################"
-echo "##########################  NVMe SSD M.2 KeyM Testing Start    # ##########################"
-
-result=`fdisk -l /dev/nvme0n1 | grep "bytes" | grep "sectors" | wc -l`
-if [ ${result} -gt 0 ]; then
-	echo "###  NVMe SSD M.2 KeyM can be detected successfully.  ###"
-else
-	RET=1
-	echo "Error Notice:  NVMe SSD M.2 KeyM can not be detected, failure."
-fi
-
-echo "######################################################################################"
-echo " "
-echo " "
-echo " "
-
-sleep 2
-
-return ${RET}
-

rtc-script/rtc-script.sh

@@ -8,7 +8,7 @@ echo " "
 echo " "
 echo " "
 echo "######################################################################################"
-echo "###############################  MT7988a RTC Testing Start  ##########################"
+echo "###############################  BPI-RV2 RTC Testing Start  ##########################"
 
 date -s 2028-08-08
 hwclock -w
@@ -16,11 +16,11 @@ date -s 2021-01-01
 line=`hwclock -r | grep "2028-08-08" | wc -l`
 if [ $line -eq 1 ]; then
 	echo " "
-	echo "###   MT7988a RTC can work fine  ### "
+	echo "###   BPI-RV2 RTC can work fine  ### "
 	echo " "
 else
 	echo " "
-	echo "Error Notice: MT7988a RTC can not work fine."
+	echo "Error Notice: BPI-RV2 RTC can not work fine."
 	echo " "
 	RET=1
 fi

usb20-script/mt_gpio.sh

@@ -4,7 +4,7 @@ SYS_FILE=/sys/class/gpio
 mt_gpio_export()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
 
    if [ ! -f ${SYS_FILE}/export ]; then
        echo "${SYS_FILE}/export file is not present"
@@ -19,7 +19,7 @@ mt_gpio_export()
 mt_gpio_dir()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    dir=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/direction ]; then
@@ -35,7 +35,7 @@ mt_gpio_dir()
 mt_gpio_out()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
    out=$2
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
@@ -51,7 +51,7 @@ mt_gpio_out()
 mt_gpio_in()
 {
    pin=$1
-   let pin=pin+428   ### gpio base 428 ###
+   let pin=pin+471   ### gpio base 471 ###
  
    if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
        echo "${SYS_FILE}/gpio${pin}/value is not present"

usb30-script/mt_gpio.sh

@@ -1,67 +0,0 @@
-
-SYS_FILE=/sys/class/gpio
-
-mt_gpio_export()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
-
-   if [ ! -f ${SYS_FILE}/export ]; then
-       echo "${SYS_FILE}/export file is not present"
-       exit 1
-   fi
-
-   echo "${pin}" > ${SYS_FILE}/export
-
-   return 0   
-}
-
-mt_gpio_dir()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
-   dir=$2
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/direction ]; then
-       echo "${SYS_FILE}/gpio${pin}/direction is not present"
-       exit 1
-   fi
-
-   echo "${dir}" > ${SYS_FILE}/gpio${pin}/direction
-
-   return 0   
-}
-
-mt_gpio_out()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
-   out=$2
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
-       echo "${SYS_FILE}/gpio${pin}/value is not present"
-       exit 1
-   fi
-
-   echo "${out}" > ${SYS_FILE}/gpio${pin}/value
-
-   return 0   
-}
-
-mt_gpio_in()
-{
-   pin=$1
-   let pin=pin+428   ### gpio base 428 ###
- 
-   if [ ! -f ${SYS_FILE}/gpio${pin}/value ]; then
-       echo "${SYS_FILE}/gpio${pin}/value is not present"
-       exit 1
-   fi
-
-   result=`cat ${SYS_FILE}/gpio${pin}/value`
-   if [ ${result} == "0" ] ; then
-       return 0
-   else
-       return 1
-   fi
-}

usb30-script/usb30-script.sh

@@ -1,70 +0,0 @@
-#/bin/bash
-
-###  This script is to check if USB3.0 USB2.0 ports are working fine  ###
-
-RET=0
-
-sleep 2
-
-echo " " 
-echo " "
-echo " "
-echo "######################################################################################"
-echo "########################## USB3.0 Deivce Testing Start ##########################"
-dmesg -c > /dev/null
-
-while true
-do
-	read -t20 -s -n1  -p "### Please Insert one USB3.0 Device U-DISK right now , then enter any key to continue. ###" keypress
-	if [ $? -eq 0 ]; then
-		echo " "
-		break
-	fi
-	echo " "
-done
-sleep 3
-
-result=`dmesg | grep "new SuperSpeed" | wc -l`
-if [ ${result} -eq 0 ]; then
-	RET=1
-	echo "Error Notice: USB3.0 Device U-DISK can not detect at first time."
-else
-	result=`dmesg | grep "Attached SCSI removable disk" | wc -l`
-	if [ ${result} -eq 0 ]; then
-		RET=1
-		echo "Error Notice: USB3.0 Device U-DISK can not detect at second time."
-	else
-		echo "###  USB3.0 Device U-DISK can detect successfully  ###"
-		
-		result=`fdisk -l /dev/sda | grep "bytes" | grep "sectors" | wc -l`
-		if [ ${result} -gt 0 ]; then
-			echo "###  USB3.0 Device U-DISK partition info is good  ###"
-		else
-			RET=1
-			echo "Error Notice:  USB3.0 Device U-DISK partition info is bad"
-		fi
-	fi
-fi
-
-sleep 1
-while true
-do
-	read -t20 -s -n1  -p "### Please Remove one USB3.0 Device U-DISK right now , then enter any key to continue. ###" keypress
-	if [ $? -eq 0 ]; then
-		echo " "
-		break
-	fi
-	echo " "
-done
-sleep 3
-
-dmesg -c > /dev/null
-echo "######################################################################################"
-echo " "
-echo " "
-echo " "
-
-sleep 2
-
-return ${RET}
-

wifi-script/wifi-script.sh

@@ -1,63 +0,0 @@
-#/bin/bash
-
-RET=0
-
-echo " "
-echo " "
-echo " "
-echo "######################################################################################"
-echo "####################### MT7988a Chip 2.4G, 5G, 6G AP Testing Start #######################"
-
-ifconfig ra0 up > /dev/null
-ifconfig ra1 up > /dev/null
-ifconfig rai0 up > /dev/null
-ifconfig rax0 up > /dev/null
-
-sleep 5
-
-result=`ifconfig -a | grep ra0 | wc -l`
-if [ ${result} -ne 1 ]; then
-	echo "###  mt_wifi driver 2.4G AP can't run up ###"
-	RET=1
-else
-	result=`iwlist ra0 rate | grep "Current Bit Rate" | wc -l`
-	if [ ${result} -ne 1 ]; then
-		echo "###  mt_wifi driver 2.4G AP can't work fine ###"
-		RET=1
-	else
-		echo "###  mt_wifi driver 2.4G AP can work fine ###"
-	fi		
-fi
-
-result=`ifconfig -a | grep rai0 | wc -l`
-if [ ${result} -ne 1 ]; then
-	echo "###  mt_wifi driver 5G AP can't run up ###"
-	RET=1
-else
-	result=`iwlist rai0 rate | grep "Current Bit Rate" | wc -l`
-	if [ ${result} -ne 1 ]; then
-		echo "###  mt_wifi driver 5G AP can't work fine ###"
-		RET=1
-	else
-		echo "###  mt_wifi driver 5G AP can work fine ###"
-	fi		
-fi
-
-result=`ifconfig -a | grep rax0 | wc -l`
-if [ ${result} -ne 1 ]; then
-	echo "###  mt_wifi driver 6G AP can't run up ###"
-	RET=1
-else
-	result=`iwlist rax0 rate | grep "Current Bit Rate" | wc -l`
-	if [ ${result} -ne 1 ]; then
-		echo "###  mt_wifi driver 6G AP can't work fine ###"
-		RET=1
-	else
-		echo "###  mt_wifi driver 6G AP can work fine ###"
-	fi		
-fi
-
-echo "######################################################################################"
-
-return ${RET}
-