848a054c6d
This patch makes use of the new aw_fel_readl_n() function to output the first four 32-bit values (SID key) from an SoC-specific address. The corresponding e-fuses may not necessarily start at the SID "base" address, e.g. on H3/A83T they are at <base+0x200>. Note: SoC support is currently incomplete. In particular, reading the SID on A31(s) is unsupported. Accessing it there is complicated by the fact that Allwinner moved this information from the SoC into the PMIC/AXP221. Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>
sunxi-tools
Copyright (C) 2012 Alejandro Mery amery@geeks.cl
Tools to help hacking Allwinner A10 (aka sun4i) based devices and possibly it's successors, that's why the 'x' in the package name.
sunxi-fexc
.fex file (de)compiler
Usage: ./sunxi-fexc [-vq] [-I <infmt>] [-O <outfmt>] [<input> [<output>]]
infmt: fex, bin (default:fex)
outfmt: fex, bin (default:bin)
bin2fex
compatibility shortcut to call sunxi-fexc to decompile a script.bin
blob back into .fex format used by Allwinner's SDK to configure
the boards.
fex2bin
compatiblity shortcut to call sunxi-fexc to compile a .fex file
into the binary form used by the legacy 3.4 kernel ("linux‑sunxi").
sunxi-fel
script interface for talking to the FEL USB handler built in to the CPU. You activate FEL mode by pushing the uboot / recovery button at poweron. See http://linux-sunxi.org/FEL/USBBoot for a detailed usage guide.
fel-gpio
Simple wrapper (script) around fel-pio and sunxi-fel
to allow GPIO manipulations via FEL
fel-sdboot
ARM native sdcard bootloader forcing the device into FEL mode
fel-pio
ARM native helper (binary) for fel-gpio
sunxi-pio
Manipulate PIO register dumps
sunxi-nand-part
Tool for manipulating Allwinner NAND partition tables
jtag-loop.sunxi
ARM native boot helper to force the SD port into JTAG and then stop, to ease debugging of bootloaders.
sunxi-bootinfo
Dump information from Allwinner boot files (boot0 / boot1)
--type=sd include SD boot info
--type=nand include NAND boot info (not implemented)
phoenix_info
gives information about a phoenix image created by the phoenixcard utility and optionally extracts the embedded boot code & firmware file from their hidden partitions.
sunxi-meminfo
Tool for reading DRAM settings from registers. Compiled as a static binary for use on android and other OSes. To build this, get a toolchain and run:
make CROSS_COMPILE=arm-linux-gnueabihf- sunxi-meminfo
sunxi-script_extractor
A simple tool, which can be executed on a rooted Android device to dump the script.bin blob from RAM via reading /dev/mem. To build this, get a toolchain and run:
make CROSS_COMPILE=arm-linux-gnueabihf- sunxi-script_extractor
License
This software is licensed under the terms of GPLv2+ as defined by the Free Software Foundation, details can be read in the COPYING file.