sunxi-tools

History

Henrik Nordstrom c749f83060 felboot: Reduce to only a linkerscript + stubs to compensate for general SPL config

The stubs is only needed because we are using objects from a full
SPL build. Even these will go away when felboot is integrated in
u-boot, reducing it to only a link script and config changes.

2013-05-24 00:30:24 +02:00

cpu.h

felboot: Small system initialization for FEL booting

2013-05-16 01:18:18 +02:00

fel-boot.ld

felboot: Reduce to only a linkerscript + stubs to compensate for general SPL config

2013-05-24 00:30:24 +02:00

io.h

felboot: Small system initialization for FEL booting

2013-05-16 01:18:18 +02:00

main.c

felboot: Reduce to only a linkerscript + stubs to compensate for general SPL config

2013-05-24 00:30:24 +02:00

Makefile

felboot: Use u-boot serial driver

2013-05-24 00:16:14 +02:00

ramboot.cmd

usb-boot: Rework ram boot to use a boot.scr @0x41000000 to indicate RAM boot

2013-05-21 23:19:19 +02:00

README.txt

felboot: Update documentation slightly

2013-05-24 00:25:11 +02:00

u-boot.sh

felboot: Small system initialization for FEL booting

2013-05-16 01:18:18 +02:00

usb-boot.sh

felboot: Small system initialization for FEL booting

2013-05-16 01:18:18 +02:00

README.txt

fel-boot.bin is a FEL bootstrap program.

fel write 0x2000 fel-boot.bin
fel exe 0x2000
fel write 0x4a000000 u-boot.bin
fel exe 0x4a000000

optionally load kernel + initramfs before fel exe of u-boot. The default
environmen looks for a boot script @0x41000000 and sources this if found.

fel write 0x2000 fel-boot.bin
fel exe 0x2000
fel write 0x4a000000 u-boot.bin
fel write 0x41000000 ramboot.scr
fel write 0x43000000 ../script.bin
fel write 0x44000000 ../uImage
fel write 0x4c000000 ../initramfs.img
fel exe 0x4a000000

Build instructions:

0. You need to build u-boot sunxi-current SPL first for the your board.

1. Specify needed configuration when when running make

	BOARD=		boardname
	CROSS_COMPILE=	compiler prefix
	UBOOT=		u-boot sources
	UBOOTOBJ=	u-boot built tree

make BOARD=cubieboard CROSS_COMPILE=arm-linux-gnueabihf- UBOOT=~/SRC/u-boot/ UBOOTOBJ=~/SRC/u-boot/build/'$(BOARD)'/

Defaults:

# Target board name. This should match the dram_<boardname>.c in
# u-boot/board/sunxi/
BOARD=eoma68

# Path to your tool chain
CROSS_COMPILE=$(HOME)/toolchains/arm-linux-gnueabihf/bin/arm-linux-gnueabihf-

# U-boot main source path
UBOOT=$(HOME)/SRC/u-boot/

# U-boot object path (O=... when building u-boot).
UBOOTOBJ=$(UBOOT)build/$(BOARD)/