Include mtu and igmp_snooping while migrating.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit fa51d04459b16245d33a1562159c65d4b03a32f0)
Ensure that the overflow styles are reapplied after a redraw. This also
simplifies the code as a side-effect.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 7a781d9cd8ab783dd7a5c72f154b972a9ea9aa98)
Also ensure that port devices are ordered numerically.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 8c71b1d01ee234c5681684e9aae5f63dbe9ebb07)
The migration code attempted to add new device sections instead of moving
the ifname option to a ports list within the existing ones.
Fixes: #5108
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit e13d82a202975bd9ac5eca380049b887cb1d585d)
Restore the display of bridge port device icons in the interface overviews.
This feature has been lost after migrating the network config from legacy
bridge declarations to device bridge declarations.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 608f89429b4b8537ddaefd070c777a6d4fb1c7a1)
OpenWrt switched from "option hwmode" to "option band" in order to select
the frequency band to use for the radio phy.
Extend the channel selector to recognize and use an existing "option band"
to select the appropriate channel list. When operating upon a wireless
configuration still using "option hwmode", then translate it to a band
value internally and translate it back to "option hwmode" on save.
This should provide forward- and backwards compatibility with both current
OpenWrt master and older versions still using hwmode.
Fixes: #5106
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 0829d31290e7c902743fbd86ea91b06ee90c6e42)
It is legal to have two device sections referring to the same netdev if one
section is a declaration (a section setting option type) and the other is
a configuration (a section not specifying a type but matching an existing
netdev).
Support this case in LuCI since it might be required for some complex
device setups.
Additionally, fix the device type determination for device configuration
sections without type, those should be treated as ethernet (a.k.a.
simple device) configuration instead of falling back to the underlying
netdev device type.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit a6c0ad00b28a5d3f91338b50f7e69fbd45f2154e)
This commit adds the ability to configure HE-modes for radios
(HE20 / HE40 / HE80 / HE160) as well as HE rate information in the
assiciation view.
Tested-on: Ubiquiti UniFi 6 Lite / LR
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit f35e877dc65c727a6ce7f7972a5be4d15921827b)
Treat not explicitly configured, preexisting VLAN interfaces as simple
network devices when adding configuration for them, since it is more
likely that people want to set general device properties such as MAC
address instead of reconfiguring ingress/egress QoS mapping, which is
the only editable property of preexisting VLAN device config dialogs.
Ref: https://github.com/openwrt/luci/issues/5102
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 3c6b59504aaa6ee33a2ee768aafc0aeaefb06004)
- Condense overly large IPv6 RA/DHCPv6 description texts and get rid of most embedded markup
- Switch ra/ndp/dhcpv6 mode selections to rich dropdown lists and move extended choice
descriptions next to the selection options
- Drop ndproxy_static option which has been removed from odhcpd long ago
- Add format validations to all text input fields
- Add ability to configure master/relay modes for non-static interfaces (#2998)
- Move extended RA configuration options into a new tab
- Prevent enabling master mode on multiple interfaces
- Prevent enabling ra/dhcpv6 server mode on non-static or master interfaces
- Drop ra_management in favor to ra_flags option (#5083)
- Add support for dns_service option
- Read current effective IPv6 MTU and hop limit placeholder values from procfs
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 3fbd4338846e8229935b54256a3a541a3e15d8bd)
Update frontend JS code which uses luci-rpc getHostHints to support the new
response format which removes the `ipv4` and `ipv6` host hint string fields
and replaces them with `ipaddrs` and `ip6addrs` weighted string list fields.
Signed-off-by: Niels Widger <niels@qacafe.com>
[rework code to be forwards/backwards compatible, fix some Network.Hosts
methods, fix IP choice ordering, change commit subject, rewrap commit
message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit c7b7b42cd3840cfd67f412191578a8659eb63c87)
This is required to resolve conflicts with the existing "device" option
in other proto handlers such as PPP or QMI where "device" refers to the
device path of the tty control device instead of a netdev name.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 10f02472c5fdab72615a7d3695e8f354811cd661)
This commit effectively reverts the change made with
907b4222f7 ("luci-mod-network: don't hide "Device" on protocol change").
Floating tunnel protocols such as 6in4, plain PPP over modem device,
VPNC etc. do not have any layer 2 device at all, for such protocols the
device selector should be hidden.
Also swap back the incorrect option order introduced with commit
b7f3cf66ca ("luci-mod-network: drop support for *adding* legacy bridges").
Since device depends on proto, it should come after the protocol selection,
not before.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit fc12933670ba9efd87a24b6823cf57a666b54c1a)
Commit b7f3cf66ca "luci-mod-network: drop support for *adding* legacy bridges"
dropped the protocol dependcies of the ifname/device selector in the add new
interface dialog.
Re-add the required dependencies and swap the order of the protocol and
device inputs while we're at it since latter depends on the former.
Fixes: b7f3cf66ca ("luci-mod-network: drop support for *adding* legacy bridges")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 147188f6ee7067119746ffc2a505ef8f4eb8943a)
Problem with handling all migrations in 1 step is that uci.sections()
doesn't include changes queued using uci.callAdd() and uci.callSet().
That could result in unexpected behaviour and generating invalid
configs.
For the sake of simplicity and reliability use 2 steps migration. The
downside is that users may get prompted twice to migrate.
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Fixes: 74be304e541f ("treewide: use "device" option in UCI "interface" sections")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit e7c9c63c657963daa1a0d57dcb0848d88e909c25)
Using "device" option requires netifd from 2021-05-26 or newer.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit bc81e09781de229e85ad74afd785afdd454b4892)
netifd has been recently patched to use "device" option instead of
"ifname" as more clear & accurate.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 74be304e541f5c03dacbdb05c543dfa6f79205a6)
Checking netifd version is important for users of the most recent LuCI
that didn't update netifd (e.g. OpenWrt package).
Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 17af33ee48bb709aec31d09b90cfbd4cbece6d0d)
LuCI supports only the newer method of specifying bridge ports using the
"ports" option. Offer users migration so they can configure their
network.
Example:
1. Before
config device
option name 'br-lan'
option type 'bridge'
list ifname 'lan1'
list ifname 'lan2'
list ifname 'lan3'
list ifname 'lan4'
2. After
config device
option name 'br-lan'
option type 'bridge'
list ports 'lan1'
list ports 'lan2'
list ports 'lan3'
list ports 'lan4'
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit b8acde7f480a18343ee1f9624b790595065613ae)
Device ("ifname" UCI option) doesn't depend on protocol so there is no
need to hide / reset it on protocol change.
While at it drop names of two removed inputs (dead code).
Fixes: ec020cee0c44 ("luci-mod-network: drop support for *editing* legacy bridges")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 907b4222f70b3351d590d8a2e35c21a4ae07db8d)
LuCI now supports the updated UCI syntax for bridges that requires:
1. device section for L2
2. interface section for L3
Check for legacy syntax usage and offser user a migration to allow
changing network config.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit bca76a767316a689d59dfd4974dcb7bfb04db1e8)
netifd has been recently patched to use more accurate "ports" option
instead of "ifname"
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit a90115cd82372eaaa0ed531800b568387e200c97)
The old way of defining bridge (L2) as part of interface (L3) is
deprecated. All such configs should be migrated to define bridge as L3
UCI section type "device".
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit ec020cee0c44793f8ce1b346675c6a36e63b0154)
The old way of defining bridge (L2) as part of interface (L3) is
deprecated. Don't support *adding* interfaces like that.
Support for *editing* legacy bridges is kept for now for compatibility
with existing legacy setups.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit b7f3cf66cadf6753153bc9d1feac1eca0c7e37f0)
Ensure that device sections are only automatically removed after all
related options have been parsed, to avoid prematurely deleting sections.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 2072c66c5a4b755a6ed16bb6486afb956a475be9)
Introduce a `migrate` properties which selectively allows disabling the
`config interface` to `config device` migration logic for single options.
Use the new flag to disable migration of the "ipv6" option which has
different semantics in interface and device sections.
Ref: https://forum.openwrt.org/t/pppoe-disable-ipv6/92548
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 935e9a3c3430db5fad1004926ddfa2e35a950be5)
Only disable legacy bridging if an existing network.device section with type
bridge is found, ignore non-type sections since those do not declare a
bridge but set attributes on top of an existing one.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit f48f9f11e7f6e3d74e2fd4b6b2478e5673f2f459)
The existing logic only handled removing the last remaining device section
option (which results in the deletion of the entire section) but failed to
actually unset single options.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit b9fad85f2e3fc988528fd326db715719288604ea)
When setting bridge and device specific options such 'stp' or
'igmp_snooping', LuCI so far transparently created or reused a
`config device` section and set the corresponding option there.
In the case of bridges, this triggers multiple problems:
- When implicitely creating a `config device` section referring to the
bridge device, the legacy bridge configuration of the corresponding
interface is disabled, causing a broken configuration on subsequent
save operations
- Netifd does not appear to properly merge bridge settings from config
device and config interface sections, leading to an incoherent
configuration state
In order to avoid that issue, do not automatically migrate bridge specific
options.
Fixes: #4948
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit a9a223b973c7f5f057d19a7fc09e7364087fec79)
The previous change didn't take dynamic dependency mangling into account.
Fixes: 2bfd4908a9 ("luci-mod-network: restore DNS option semantics for proto static")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 9a92f9c7615f710a7934cccc8ac23902247c154b)
The peerdns settings makes little practical sense for proto:static
interfaces, so revert to allow setting the DNS server list directly.
Fixes: faad7464a8 ("luci-mod-network: add support for network.device sections")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 2bfd4908a9cfeac74c7abc31d8cef0bf1e58af52)
- Disable interface-level bridging if a corresponding br-$name bridge
already exists as device declaration
- Exempt wireless interfaces from bridge port configuration, they can only
be attached indirectly through "option network"
- Consider bridge ports from both "option ifname" in interface/device
sections and from "option ports" in bridge-vlan ones
- Small fixes for rendering quirks
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 14fdce0fcdfe39ff4143b294a1f1f65d7c783ce7)
Recent netifd automatically adds wireless devices as bridge ports if the
layer 2 device referenced by the "config interface" target network is a
Linux network bridge or a VLAN interface on top of a network bridge.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 3b4c161e01e2bd19105c123fbec463bc069d637b)
