Use the new `firewall.getZoneColorStyle()` helper to apply background
zone color styles to the interface boxes.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 849772df96784a0d5480ddf6305e30e7d442740f)
Allow to modify the sourcefilter option in the network.interface config.
This is required for custom policy routing with IPv6 MWAN and/or NAT6.
Signed-off-by: Vladislav Grigoryev <vg.aetera@gmail.com>
(cherry picked from commit 22296fb07276159f6d1dae719f32920ad52d5873)
"Setup" is a noun, the thing. "Set up" is a verbal idiom, the action.
One cannot setup a DHCP server, just as one cannot fuckup a test, or
ripup some paper. One can, however, set a DHCP server up, and one can
fuck a test up, and rip some paper up.
Signed-off-by: Paul Dee <systemcrash@users.noreply.github.com>
(cherry picked from commit c0299e2c3d09c48b515447b2c6fefd00ffd2950b)
.. when no dnsmasq is installed, as it
tells only that there are no settings available
Signed-off-by: Fritz D. Ansel <fdansel@yandex.ru>
(cherry picked from commit 2393289367bb3c4e366ee36cc66af9149687139b)
Fix the incorrectly displayed value for the option "ip6table".
Signed-off-by: Vladislav Grigoryev <vg.aetera@gmail.com>
(cherry picked from commit 3ebdf51f9b2e713cd655c0f97f2542c96736cae5)
Fix incorrect minimum 60GHz frequency value and ensure that a 60GHz band
choice option is available once corresponding channels are found on the
system.
Ref: http://lists.openwrt.org/pipermail/openwrt-devel/2021-July/035810.html
Suggested-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit e5626ece12236f6be9dbb6da6eb90fcbb469a1f0)
- validate current form value IP instead of stored uci one
- ensure to not pass non-string values to the validator
- remove leftover debug code
- simplify obtaining formvalues
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 9d15a4e70c10a43911c7f9d48240a01c23eb81b6)
- Ensure that MAC addresses are unique within the same pool
- Ensure that IP addresses are globally unique
- Ensure that IP addresses are within any DHCP pool range
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 7e562895380d6bbe89ed88fe7576272c078f3b59)
There are many switch drivers where VLAN functionality is enabled by default.
In this situation, LuCI cannot be used to disable VLAN functionality,
because removing the line from configuration results in VLAN remaining enabled
by the driver.
When enable_vlan is set to 0 by default
by using functions in board.d,
and an unrelated change is made on the Switch webpage,
then the enable_vlan option gets deleted when changes are saved.
Therefore, the option needs to be preserved, whether set to 0 or 1.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit 51ab737a4ba2b0f2a9d479cf114837c570f8d05c)
Fix the wrong value for the "source" option of the "route6" section.
Signed-off-by: Vladislav Grigoryev <vg.aetera@gmail.com>
(cherry picked from commit 8b4015036d6f298cbfe0291ab8fdc23b4133cca7)
The recently introduced band option support changed the internal frequency
selector choice values, breaking the legacy rates option dependency.
Fixes: #5234
Fixes: 0829d31290 ("luci-mod-network: support newer wireless.wifi-device.band option")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit fd2e755b6f30d80ffdf15536669fdb739212ac96)
This reverts commit 463e910119813aaea0755ff5c16c91ce412a8cbb.
This change causes the entire static lease to get deleted when attempting
to change the MAC address.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 91f46d765b36825fcfe63e2b7d4863de00cdc69d)
Calling `uci.set()` with an empty array yields an invalid argument error,
make sure to pass `null` instead in this case.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit f1f566bfe2a6b0960ba95a5ea05ca4353b766867)
The jsmin minifier incorrectly transforms the expression `/\*/.test(...)`
into `/\* /.test(...)`, causing the VLAN filter dialog to not recognize
PVID settings in the configuration.
Work around the issue by using an equivalent `\x2a` escape sequence instead.
Ref: https://forum.openwrt.org/t/x/99222/28
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 2869c9cf324a9e057567075d4977c7cc40140938)
Recent busybox traceroute applet versions support both IPv4 and IPv6 and
default to IPv6 when running a route trace to an IPv6 enabled target
host. Pass the `-4` flag to enforce IPv4 mode in this case.
Fixes: #5155
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit c4f429461545d1401429e7ba133f24a55d1015b6)
The previous code naively looked for a `t` in the entire port spec,
wrongly matching untagged ports having a `t` in their name, such
as `eth0`.
Rework the logic to be more strict when parsing the port member
specification to avoid this issue.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 01eac366f69ba58c090ddc2cb70aeb069adbdd5a)
Since all netifd device types inherit generic device settings, we can
simplify various aspects of the device configuration ui and drop unused
code while we're at it.
- Remove setIfActive() helper, superseded by commit
f3f74bd0fe ("luci-base: form.js: consider aliased options in AbstractValue.remove()")
- Remove most dependency constraints to make all generic device settings
available for all device types
- Add MTU value validation to disallow exceeding parent device MTU for
VLAN interfaces
- Dynamically update placeholder values when changing base or parent
device options
- Undo VLAN network config hack since all options are available now.
Reverts commit
3c6b59504a ("luci-mod-interfaces: simplify configuring MAC address of 802.1q devices")
- Do not suggest inactive wireless networks as existing device or base
device choices
- Disallow specifying names of already existing network devices when
creating new device settings
- Fix a number of multicast dependency specifications
- Drop now unused functions
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit f689d0d208acbf9934da5a2d49c8717c054be585)
Support for disabling routes in netifd was added in commit [1]. This commit
adds support for disabling routes through the LuCI interface.
Additionally hidden the route options descriptions in the header of the
routes table (they are still available in the modal view).
[1]: https://git.openwrt.org/?p=project/netifd.git;a=commit;h=327da9895327bc56b23413ee91a6e6b6e0e4329d
Signed-off-by: Anton Kikin <a.kikin@tano-systems.com>
(cherry picked from commit bfe8a01040c8a74f38818195620f069f5bc10c5c)
In case multiple bridges with bridge vlans are declared, LuCI did not
correctly filter the VLANs to show only the ones belonging to the
bridge being configured currently.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit f6f1eacb012b0364940c1dc9b9392fc0e60405b9)
Include mtu and igmp_snooping while migrating.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit fa51d04459b16245d33a1562159c65d4b03a32f0)
Ensure that the overflow styles are reapplied after a redraw. This also
simplifies the code as a side-effect.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 7a781d9cd8ab783dd7a5c72f154b972a9ea9aa98)
Also ensure that port devices are ordered numerically.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 8c71b1d01ee234c5681684e9aae5f63dbe9ebb07)
The migration code attempted to add new device sections instead of moving
the ifname option to a ports list within the existing ones.
Fixes: #5108
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit e13d82a202975bd9ac5eca380049b887cb1d585d)
Restore the display of bridge port device icons in the interface overviews.
This feature has been lost after migrating the network config from legacy
bridge declarations to device bridge declarations.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 608f89429b4b8537ddaefd070c777a6d4fb1c7a1)
OpenWrt switched from "option hwmode" to "option band" in order to select
the frequency band to use for the radio phy.
Extend the channel selector to recognize and use an existing "option band"
to select the appropriate channel list. When operating upon a wireless
configuration still using "option hwmode", then translate it to a band
value internally and translate it back to "option hwmode" on save.
This should provide forward- and backwards compatibility with both current
OpenWrt master and older versions still using hwmode.
Fixes: #5106
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 0829d31290e7c902743fbd86ea91b06ee90c6e42)
It is legal to have two device sections referring to the same netdev if one
section is a declaration (a section setting option type) and the other is
a configuration (a section not specifying a type but matching an existing
netdev).
Support this case in LuCI since it might be required for some complex
device setups.
Additionally, fix the device type determination for device configuration
sections without type, those should be treated as ethernet (a.k.a.
simple device) configuration instead of falling back to the underlying
netdev device type.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit a6c0ad00b28a5d3f91338b50f7e69fbd45f2154e)
This commit adds the ability to configure HE-modes for radios
(HE20 / HE40 / HE80 / HE160) as well as HE rate information in the
assiciation view.
Tested-on: Ubiquiti UniFi 6 Lite / LR
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit f35e877dc65c727a6ce7f7972a5be4d15921827b)
Treat not explicitly configured, preexisting VLAN interfaces as simple
network devices when adding configuration for them, since it is more
likely that people want to set general device properties such as MAC
address instead of reconfiguring ingress/egress QoS mapping, which is
the only editable property of preexisting VLAN device config dialogs.
Ref: https://github.com/openwrt/luci/issues/5102
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 3c6b59504aaa6ee33a2ee768aafc0aeaefb06004)
- Condense overly large IPv6 RA/DHCPv6 description texts and get rid of most embedded markup
- Switch ra/ndp/dhcpv6 mode selections to rich dropdown lists and move extended choice
descriptions next to the selection options
- Drop ndproxy_static option which has been removed from odhcpd long ago
- Add format validations to all text input fields
- Add ability to configure master/relay modes for non-static interfaces (#2998)
- Move extended RA configuration options into a new tab
- Prevent enabling master mode on multiple interfaces
- Prevent enabling ra/dhcpv6 server mode on non-static or master interfaces
- Drop ra_management in favor to ra_flags option (#5083)
- Add support for dns_service option
- Read current effective IPv6 MTU and hop limit placeholder values from procfs
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 3fbd4338846e8229935b54256a3a541a3e15d8bd)
Update frontend JS code which uses luci-rpc getHostHints to support the new
response format which removes the `ipv4` and `ipv6` host hint string fields
and replaces them with `ipaddrs` and `ip6addrs` weighted string list fields.
Signed-off-by: Niels Widger <niels@qacafe.com>
[rework code to be forwards/backwards compatible, fix some Network.Hosts
methods, fix IP choice ordering, change commit subject, rewrap commit
message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit c7b7b42cd3840cfd67f412191578a8659eb63c87)
This is required to resolve conflicts with the existing "device" option
in other proto handlers such as PPP or QMI where "device" refers to the
device path of the tty control device instead of a netdev name.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 10f02472c5fdab72615a7d3695e8f354811cd661)
