New build

README.md

@@ -0,0 +1,2 @@
+# firmware
+Orange Pi specific firmware

ap6210/bd_addr.txt

@@ -0,0 +1 @@
+11:22:33:44:55:66

ap6210/nvram.txt

@@ -0,0 +1,57 @@
+#AP6210_NVRAM_V1.3_08182013
+manfid=0x2d0
+prodid=0x492
+vendid=0x14e4
+devid=0x4343
+boardtype=0x0598
+
+# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
+#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
+boardrev=0x1307
+boardnum=777
+xtalfreq=26000
+boardflags=0x80201
+boardflags2=0x80
+sromrev=3
+wl0id=0x431b
+macaddr=00:90:4c:07:71:12
+aa2g=1
+ag0=2
+maxp2ga0=74
+cck2gpo=0x2222
+ofdm2gpo=0x44444444
+mcs2gpo0=0x8888
+mcs2gpo1=0x8888
+pa0maxpwr=56
+
+#P207 PA params
+#pa0b0=5447
+#pa0b1=-658
+#pa0b2=-175<div></div>
+
+#Same PA params for P304,P305, P306, P307
+
+pa0b0=5447
+pa0b1=-607
+pa0b2=-160
+pa0itssit=62
+pa1itssit=62
+
+
+cckPwrOffset=5
+ccode=0
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+triso2g=0
+noise_cal_enable_2g=1
+noise_cal_po_2g=6
+swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
+temp_add=29767
+temp_mult=425
+
+btc_flags=0x6
+btc_params0=5000
+btc_params1=1000
+btc_params6=63
+

ap6210/nvram_ap6210.txt

@@ -0,0 +1,57 @@
+#AP6210_NVRAM_V1.2_03192013
+manfid=0x2d0
+prodid=0x492
+vendid=0x14e4
+devid=0x4343
+boardtype=0x0598
+
+# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
+#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
+boardrev=0x1307
+boardnum=777
+xtalfreq=26000
+boardflags=0x80201
+boardflags2=0x80
+sromrev=3
+wl0id=0x431b
+macaddr=00:90:4c:07:71:12
+aa2g=1
+ag0=2
+maxp2ga0=74
+cck2gpo=0x2222
+ofdm2gpo=0x44444444
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+pa0maxpwr=56
+
+#P207 PA params
+#pa0b0=5447
+#pa0b1=-658
+#pa0b2=-175<div></div>
+
+#Same PA params for P304,P305, P306, P307
+
+pa0b0=5447
+pa0b1=-607
+pa0b2=-160
+pa0itssit=62
+pa1itssit=62
+
+
+cckPwrOffset=5
+ccode=0
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+triso2g=0
+noise_cal_enable_2g=0
+noise_cal_po_2g=0
+swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
+temp_add=29767
+temp_mult=425
+
+btc_flags=0x6
+btc_params0=5000
+btc_params1=1000
+btc_params6=63
+

ap6210/nvram_apxxxx.txt

@@ -0,0 +1,57 @@
+#AP6210_NVRAM_V1.2_03192013
+manfid=0x2d0
+prodid=0x492
+vendid=0x14e4
+devid=0x4343
+boardtype=0x0598
+
+# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
+#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
+boardrev=0x1307
+boardnum=777
+xtalfreq=26000
+boardflags=0x80201
+boardflags2=0x80
+sromrev=3
+wl0id=0x431b
+macaddr=00:90:4c:07:71:12
+aa2g=1
+ag0=2
+maxp2ga0=74
+cck2gpo=0x2222
+ofdm2gpo=0x44444444
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+pa0maxpwr=56
+
+#P207 PA params
+#pa0b0=5447
+#pa0b1=-658
+#pa0b2=-175<div></div>
+
+#Same PA params for P304,P305, P306, P307
+
+pa0b0=5447
+pa0b1=-607
+pa0b2=-160
+pa0itssit=62
+pa1itssit=62
+
+
+cckPwrOffset=5
+ccode=0
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+triso2g=0
+noise_cal_enable_2g=0
+noise_cal_po_2g=0
+swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
+temp_add=29767
+temp_mult=425
+
+btc_flags=0x6
+btc_params0=5000
+btc_params1=1000
+btc_params6=63
+

ap6212/nvram.txt

@@ -0,0 +1,54 @@
+#AP6212_NVRAM_V1.0_20140603
+# 2.4 GHz, 20 MHz BW mode
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0726
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0726
+boardrev=0x1101
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+xtalfreq=26000
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=90
+txpwrbckof=6
+cckbw202gpo=0x5555
+legofdmbw202gpo=0x77777777
+mcsbw202gpo=0xaaaaaaaa
+
+# OFDM IIR :
+ofdmdigfilttype=7
+# PAPD mode:
+papdmode=2
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+#OOB parameters
+hostwake=0x40
+hostrdy=0x41
+usbrdy=0x03
+usbrdydelay=100
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x10 for Host awake
+muxenab=0x10
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+

ap6275p/config.txt

@@ -0,0 +1,8 @@
+PM=0
+pm_in_suspend=2
+keep_alive_period=120000
+garp=1
+suspend_bcn_li_dtim=10
+wl_preinit=pm2_sleep_ret=20
+pkt_filter_del=100, 102, 103, 104, 105, 107
+pkt_filter_add=142 0 0 77 0xffffffffffffffffffffffffffffff 0x2F6465766963652F77616B6575702F

ap6275p/nvram_AP6275P.txt

@@ -0,0 +1,337 @@
+# AP6275P_NVRAM_V1.3_20230109A
+# AP6271P_V00 board, iPA version.
+# nvram copied and edited from AP6271P_EVB_V02 EVB board //
+# SSID generated using Alberto's boardssid.py script:
+# ********************SUMMARY********************
+# Board Name: AP6271P_V00
+#SSID: 0x086d
+#macmid: 0x02df
+# Successfully made SSID entry in sromdefs.tcl.
+# Successfully made macmid entry in sromdefs.tcl.
+# Successfully made SSID entry in tblssid.py.
+# *************************************************
+# $ Copyright Broadcom $
+#
+#
+# <<Broadcom-WL-IPTag/Proprietary:>>
+NVRAMRev=$Rev: 874188 $
+sromrev=11
+boardrev=0x1213
+boardtype=0x08ed
+boardflags=0x00400201
+boardflags2=0xc0800000
+boardflags3=0x40002180
+#boardnum=57410
+macaddr=00:90:4c:12:d0:01
+jtag_irw=38
+
+#Regulatory specific
+ccode=0
+regrev=0
+
+# Board specific
+vendid=0x14e4
+devid=0x449d
+manfid=0x2d0
+antswitch=0
+pdgain5g=0
+pdgain2g=0
+aa2g=3
+aa5g=3
+agbg0=2
+agbg1=2
+aga0=2
+aga1=2
+extpagain2g=2
+extpagain5g=2
+rxgains2gelnagaina0=0
+rxgains2gtrisoa0=0
+rxgains2gtrelnabypa0=0
+rxgains5gelnagaina0=0
+rxgains5gtrisoa0=0
+rxgains5gtrelnabypa0=0
+rxgains5gmelnagaina0=0
+rxgains5gmtrisoa0=0
+rxgains5gmtrelnabypa0=0
+rxgains5ghelnagaina0=0
+rxgains5ghtrisoa0=0
+rxgains5ghtrelnabypa0=0
+rxgains2gelnagaina1=0
+rxgains2gtrisoa1=0
+rxgains2gtrelnabypa1=0
+rxgains5gelnagaina1=0
+rxgains5gtrisoa1=0
+rxgains5gtrelnabypa1=0
+rxgains5gmelnagaina1=0
+rxgains5gmtrisoa1=0
+rxgains5gmtrelnabypa1=0
+rxgains5ghelnagaina1=0
+rxgains5ghtrisoa1=0
+rxgains5ghtrelnabypa1=0
+
+#RSSI related
+# 2G
+rssicorrnorm_c0=4,4
+rssicorrnorm_c1=4,4
+# 5G
+rssicorrnorm5g_c0=5,5,5,5,5,5,5,5,5,5,5,5
+rssicorrnorm5g_c1=4,4,4,4,4,4,4,4,4,4,4,4
+
+
+#Two range TSSI
+tworangetssi2g=0
+tworangetssi5g=0
+lowpowerrange2g=0
+lowpowerrange5g=0
+low_adc_rate_en=1
+
+nocrc=1
+otpimagesize=502
+
+xtalfreq=37400
+
+txchain=3
+rxchain=3
+
+cckdigfilttype=2
+
+#bit mask for slice capability bit 0:2G bit 1:5G
+bandcap=3
+
+#TXBF Related
+rpcal2g=0
+rpcal5gb0=0
+rpcal5gb1=0
+rpcal5gb2=0
+rpcal5gb3=0
+
+
+#FDSS Related
+fdss_level_2g=4,4
+fdss_interp_en=1
+fdss_level_5g=3,3
+fdss_level_11ax_2g=3,3
+fdss_level_11ax_2g_ch1=3,3
+fdss_level_11ax_2g_ch11=3,3
+fdss_level_11ax_5g=3,3
+
+#Tempsense Related
+tempthresh=255
+tempoffset=40
+rawtempsense=0x1ff
+phycal_tempdelta=15
+temps_period=15
+temps_hysteresis=15
+
+#------------- TSSI Related -------------
+tssipos2g=1
+tssipos5g=1
+AvVmid_c0=2,127,4,92,4,91,4,91,4,94
+AvVmid_c1=2,127,4,93,4,93,4,95,3,110
+
+# CCK in case of multi mode 2
+pa2gccka0=-51,9141,-1039
+pa2gccka1=-106,8172,-949
+# OFDM in case of multi_mode 2
+
+pa2ga0=-31,8047,-863
+pa2ga1=-3,8006,-803
+
+pa5ga0=-184,5375,-671,-174,5517,-677,-193,5122,-649,-177,5303,-666
+pa5ga1=-207,5022,-635,-168,5741,-695,-169,5544,-687,-182,5435,-687
+
+
+# Max power and offsets
+maxp2ga0=88
+maxp2ga1=88
+maxp5ga0=68,68,68,66
+maxp5ga1=69,69,66,66
+subband5gver=0x4
+paparambwver=3
+cckpwroffset0=0
+cckpwroffset1=0
+pdoffset40ma0=0x4444
+pdoffset80ma0=0x4444
+pdoffset40ma1=0x4444
+pdoffset80ma1=0x4444
+cckbw202gpo=0x4444
+cckbw20ul2gpo=0
+mcsbw202gpo=0xBB977665
+mcsbw402gpo=0xBB977665
+dot11agofdmhrbw202gpo=0x7766
+ofdmlrbw202gpo=0x0055
+mcsbw205glpo=0x88331100
+mcsbw405glpo=0xC8332200
+mcsbw805glpo=0xCC443320
+mcsbw1605glpo=0
+mcsbw205gmpo=0x88331100
+mcsbw405gmpo=0xC8332200
+mcsbw805gmpo=0xCC443320
+mcsbw1605gmpo=0
+mcsbw205ghpo=0x88331100
+mcsbw405ghpo=0xC8333300
+mcsbw805ghpo=0xCC443320
+powoffs2gtna0=0,0,0,0,0,0,0,0,0,0,0,0,0,0
+powoffs2gtna1=0,0,0,0,0,0,0,0,0,0,0,0,0,0
+mcs1024qam2gpo=0xEEEE
+mcs1024qam5glpo=0xFFFFDD
+mcs1024qam5gmpo=0xFFFFDD
+mcs1024qam5ghpo=0xFFFFDD
+mcs1024qam5gx1po=0xFFFFDD
+mcs1024qam5gx2po=0xFFFFDD
+mcs8poexp=0
+mcs9poexp=0
+mcs10poexp=0
+
+# 5G power offset per channel for band edge channel
+powoffs5g20mtna0=0,0,0,0,0,0,0
+powoffs5g20mtna1=0,0,0,0,0,0,0
+powoffs5g40mtna0=0,0,0,0,0
+powoffs5g40mtna1=0,0,0,0,0
+powoffs5g80mtna0=0,0,0,0,0
+powoffs5g80mtna1=0,0,0,0,0
+mcs11poexp=0
+
+#LTE Coex Related
+ltecxmux=0
+ltecxpadnum=0x0504
+ltecxfnsel=0x44
+ltecxgcigpio=0x04
+#OOB params
+#device_wake_opt=1
+host_wake_opt=0
+
+# SWCTRL Related
+
+swctrlmap_2g=0x10101010,0x06030401,0x04011010,0x000000,0x3FF
+swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+swctrlmap_5g=0x80408040,0x21240120,0x01208040,0x000000,0x3FF
+swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+clb2gslice0core0=0x01b
+clb2gslice1core0=0x000
+clb5gslice0core0=0x064
+clb5gslice1core0=0x000
+clb2gslice0core1=0x056
+clb2gslice1core1=0x000
+clb5gslice0core1=0x0a1
+clb5gslice1core1=0x000
+btc_prisel_ant_mask=0x2
+clb_swctrl_smask_ant0=0x27f
+clb_swctrl_smask_ant1=0x2f7
+muxenab=1
+
+#BT Coex 1:TDM
+btc_mode=1
+
+# --- PAPD Cal related params ----
+txwbpapden=0 # 0:NBPAPD 1:WBPAPD
+# NB PAPD Cal params
+nb_eps_offset=470,470
+nb_bbmult=66,66
+nb_papdcalidx=6,6
+nb_txattn=2,2
+nb_rxattn=1,1
+nb_eps_stopidx=63
+epsilonoff_5g20_c0=0,0,0,0
+epsilonoff_5g40_c0=0,0,0,0
+epsilonoff_5g80_c0=0,0,0,0
+epsilonoff_5g20_c1=0,0,-2,-3
+epsilonoff_5g40_c1=0,0,-2,-3
+epsilonoff_5g80_c1=0,0,-2,-3
+epsilonoff_2g20_c0=0
+epsilonoff_2g20_c1=0
+
+# energy detect threshold
+ed_thresh2g=-67
+ed_thresh5g=-67
+# energy detect threshold for EU
+eu_edthresh2g=-67
+eu_edthresh5g=-67
+
+#rpcal coef for imptxbf
+rpcal5gb0=238
+rpcal5gb1=228
+rpcal5gb2=222
+rpcal5gb3=229
+rpcal2g=15
+ocl=0
+bt_coex_chdep_div=1
+
+# OLPC Related
+disable_olpc=0
+olpc_thresh5g=32
+olpc_anchor5g=40
+olpc_thresh2g=32
+olpc_anchor2g=40
+
+#PAPR related
+paprdis=0
+paprrmcsgamma2g=500,550,550,-1,-1,-1,-1,-1,-1,-1,-1,-1
+paprrmcsgain2g=128,128,128,0,0,0,0,0,0,0,0,0
+paprrmcsgamma2g_ch13=500,550,550,-1,-1,-1,-1,-1,-1,-1,-1,-1
+paprrmcsgain2g_ch13=128,128,128,0,0,0,0,0,0,0,0,0
+paprrmcsgamma2g_ch1=500,550,550,-1,-1,-1,-1,-1,-1,-1,-1,-1
+paprrmcsgain2g_ch1=128,128,128,0,0,0,0,0,0,0,0,0
+paprrmcsgamma5g20=500,500,500,-1,-1,-1,-1,-1,-1,-1,-1,-1
+paprrmcsgain5g20=128,128,128,0,0,0,0,0,0,0,0,0
+paprrmcsgamma5g40=600,600,600,-1,-1,-1,-1,-1,-1,-1,-1,-1
+paprrmcsgain5g40=128,128,128,0,0,0,0,0,0,0,0,0
+paprrmcsgamma5g80=-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
+paprrmcsgain5g80=0,0,0,0,0,0,0,0,0,0,0,0
+
+# Enable papd for cck when target pwr ge 16dBm
+cckpapd_pwrthresh=64
+
+## ULOFDMA Board limit PPRs for 2G20 ##
+ruppr2g20bpska0=0x00021084
+ruppr2g20bpska1=0x00021084
+ruppr2g20qpska0=0x00021084
+ruppr2g20qpska1=0x00021084
+ruppr2g20qam16a0=0x000294A5
+ruppr2g20qam16a1=0x000294A5
+ruppr2g20qam64a0=0x00039CE7
+ruppr2g20qam64a1=0x00039CE7
+ruppr2g20qam256a0=0x0005AD6B
+ruppr2g20qam256a1=0x0005AD6B
+ruppr2g20qam1024a0=0x0005AD6B
+ruppr2g20qam1024a1=0x0005AD6B
+## ULOFDMA Board limit PPRs for 5G20 ##
+ruppr5g20bpska0=0x00008421
+ruppr5g20bpska1=0x00008421
+ruppr5g20qpska0=0x00008421
+ruppr5g20qpska1=0x00008421
+ruppr5g20qam16a0=0x00010842
+ruppr5g20qam16a1=0x00010842
+ruppr5g20qam64a0=0x00021084
+ruppr5g20qam64a1=0x00021084
+ruppr5g20qam256a0=0x00042108
+ruppr5g20qam256a1=0x00042108
+ruppr5g20qam1024a0=0x0006318C
+ruppr5g20qam1024a1=0x0006318C
+## ULOFDMA Board limit PPRs for 5G40 ##
+ruppr5g40bpska0=0x00108421
+ruppr5g40bpska1=0x00108421
+ruppr5g40qpska0=0x00108421
+ruppr5g40qpska1=0x00108421
+ruppr5g40qam16a0=0x00210842
+ruppr5g40qam16a1=0x00210842
+ruppr5g40qam64a0=0x00421084
+ruppr5g40qam64a1=0x00421084
+ruppr5g40qam256a0=0x00C6318C
+ruppr5g40qam256a1=0x00C6318C
+ruppr5g40qam1024a0=0x01084210
+ruppr5g40qam1024a1=0x01084210
+## ULOFDMA Board limit PPRs for 5G80 ##
+ruppr5g80bpska0=0x04108421
+ruppr5g80bpska1=0x04108421
+ruppr5g80qpska0=0x04108421
+ruppr5g80qpska1=0x04108421
+ruppr5g80qam16a0=0x0C318C63
+ruppr5g80qam16a1=0x0C318C63
+ruppr5g80qam64a0=0x10421084
+ruppr5g80qam64a1=0x10421084
+ruppr5g80qam256a0=0x30C6318C
+ruppr5g80qam256a1=0x30C6318C
+ruppr5g80qam1024a0=0x41084210
+ruppr5g80qam1024a1=0x41084210
+

brcm/brcmfmac-ap6330-sdio.txt

@@ -0,0 +1,82 @@
+#AP6330_NVRAM_V1.0_20121130
+#Sample variables file for BCM94330 SD FC AGB board
+manfid=0x2d0
+prodid=0x0547
+vendid=0x14e4
+devid=0x4360
+boardtype=0x05e1
+boardrev=0x1202
+boardflags=0x0080200
+nocrc=1
+xtalfreq=26000
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+ag0=254
+aa2g=1
+ccode=ALL
+pa0itssit=0x20
+pa0b0=5587
+pa0b1=-633
+pa0b2=-158
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+#rssi params for 5GHz
+rssismf5g=0x4
+rssismc5g=0x3
+rssisav5g=0x7
+#PA parameters for lower a-band
+pa1lob0=4748
+pa1lob1=-566
+pa1lob2=-180
+#PA parameters for midband
+pa1b0=4762
+pa1b1=-593
+pa1b2=-172
+#PA parameters for high band
+#pa1hib0=4596
+pa1hib0=4666
+pa1hib1=-619
+pa1hib2=-163
+rxpo5g=0
+maxp2ga0=74
+maxp5ga0=66
+maxp5gla0=66
+maxp5gha0=66
+# 2.4G Tx Power offsets
+cck2gpo=0x2222
+ofdm2gpo=0x44444444
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+# 5G Tx Power offsets
+ofdm5gpo=0x44444444
+ofdm5glpo=0x44444444
+ofdm5ghpo=0x44444444
+mcs5gpo0=0x6666
+mcs5gpo1=0x6666
+mcs5glpo0=0x6666
+mcs5glpo1=0x6666
+mcs5ghpo0=0x6666
+mcs5ghpo1=0x6666
+sromrev=3
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+cckPwrOffset=4
+swctrlmap_2g=0x44844484,0x42824282,0x40804484,0x18282,0x1ff
+triso5g=0
+swctrlmap_5g=0x00100010,0x20202020,0x20202020,0x14202,0x0f0
+rfreg033=0x19
+rfreg033_cck=0x1f
+dacrate2g=160
+dacrate5g=160
+txalpfbyp2g=1
+bphyscale=17
+cckPwrIdxCorr=-15
+pacalidx2g=50
+#pacalidx5g=20
+noise_cal_ref_2g=53
+noise_cal_po_2g=0
+noise_cal_ref_5g=52
+noise_cal_po_5g=5,0,0
+# 4330 OOB parameter: High level trigger
+muxenab=0x10

brcm/brcmfmac4329-sdio.txt

@@ -0,0 +1,70 @@
+# bcm94329sdagb board
+# $Copyright (C) 2008 Broadcom Corporation$
+# $id$
+
+sromrev=3
+vendid=0x14e4
+devid=0x432f
+boardtype=0x53e
+
+boardrev=0x41
+
+#boardflags=0x1200
+boardflags=0x200
+
+# Specify the xtalfreq if it is otherthan 38.4MHz
+xtalfreq=37400
+
+aa2g=3
+aa5g=0
+
+ag0=255
+#tri2g=0x64
+
+# 11g paparams
+pa0b0=5542,5542,5542
+pa0b1=64244,64244,64244
+pa0b2=65202,65202,65202
+
+pa0itssit=62
+pa0maxpwr=74
+opo=0
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+
+# 11g rssi params
+rssismf2g=0xa,0xa,0xa
+rssismc2g=0xb,0xb,0xb
+rssisav2g=0x3,0x3,0x3
+bxa2g=0
+
+# country code
+ccode=ALL
+cctl=0x0
+cckdigfilttype=0
+ofdmdigfilttype=1
+
+rxpo2g=0
+
+boardnum=1
+macaddr=00:90:4c:c5:00:34
+
+# xtal pu and pd time control variable
+# pu time is driver default (0x1501)
+#r13t=0x1501
+
+#######
+nocrc=1
+
+#for mfgc
+otpimagesize=182
+
+# sdio extra configs
+hwhdr=0x05ffff031030031003100000
+
+#This generates empty F1, F2 and F3 tuple chains, and may be used if the host SDIO stack does not require the standard tuples.
+#RAW1=80 02 fe ff
+
+#This includes the standard FUNCID and FUNCE tuples in the F1, F2, F3 and common CIS.
+RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A
+nvramver=4.218.214.0

brcm/brcmfmac4330-sdio.rockchip,rk3318-box.txt

@@ -0,0 +1,82 @@
+#AP6330_NVRAM_V1.0_20121130
+#Sample variables file for BCM94330 SD FC AGB board
+manfid=0x2d0
+prodid=0x0547
+vendid=0x14e4
+devid=0x4360
+boardtype=0x05e1
+boardrev=0x1202
+boardflags=0x0080200
+nocrc=1
+xtalfreq=26000
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+ag0=254
+aa2g=1
+ccode=ALL
+pa0itssit=0x20
+pa0b0=5587
+pa0b1=-633
+pa0b2=-158
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+#rssi params for 5GHz
+rssismf5g=0x4
+rssismc5g=0x3
+rssisav5g=0x7
+#PA parameters for lower a-band
+pa1lob0=4748
+pa1lob1=-566
+pa1lob2=-180
+#PA parameters for midband
+pa1b0=4762
+pa1b1=-593
+pa1b2=-172
+#PA parameters for high band
+#pa1hib0=4596
+pa1hib0=4666
+pa1hib1=-619
+pa1hib2=-163
+rxpo5g=0
+maxp2ga0=74
+maxp5ga0=66
+maxp5gla0=66
+maxp5gha0=66
+# 2.4G Tx Power offsets
+cck2gpo=0x2222
+ofdm2gpo=0x44444444
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+# 5G Tx Power offsets
+ofdm5gpo=0x44444444
+ofdm5glpo=0x44444444
+ofdm5ghpo=0x44444444
+mcs5gpo0=0x6666
+mcs5gpo1=0x6666
+mcs5glpo0=0x6666
+mcs5glpo1=0x6666
+mcs5ghpo0=0x6666
+mcs5ghpo1=0x6666
+sromrev=3
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+cckPwrOffset=4
+swctrlmap_2g=0x44844484,0x42824282,0x40804484,0x18282,0x1ff
+triso5g=0
+swctrlmap_5g=0x00100010,0x20202020,0x20202020,0x14202,0x0f0
+rfreg033=0x19
+rfreg033_cck=0x1f
+dacrate2g=160
+dacrate5g=160
+txalpfbyp2g=1
+bphyscale=17
+cckPwrIdxCorr=-15
+pacalidx2g=50
+#pacalidx5g=20
+noise_cal_ref_2g=53
+noise_cal_po_2g=0
+noise_cal_ref_5g=52
+noise_cal_po_5g=5,0,0
+# 4330 OOB parameter: High level trigger
+muxenab=0x10

brcm/brcmfmac4330-sdio.txt

@@ -0,0 +1,40 @@
+# bcm94330wlsdgb.txt
+manfid=0x2d0
+prodid=0x0552
+vendid=0x14e4
+devid=0x4360
+boardtype=0x0552
+boardrev=0x11
+# this design has 2.4GHz SP3T switch
+boardflags=0x00080200
+nocrc=1
+xtalfreq=37400
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+ag0=255
+aa2g=1
+ccode=CN
+pa0b0=0x14d0
+pa0b1=0xfd98
+pa0b2=0xff78
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+maxp2ga0=0x50
+sromrev=3
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+cckPwrOffset=5
+ofdm2gpo=0x66666666
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+swctrlmap_2g=0x04040404,0x02020202,0x02020404,0x10202,0x1ff
+swctrlmap_5g=0x00100010,0x00280020,0x00200010,0x14202,0x2f8
+rfreg033=0x19
+rfreg033_cck=0x1f
+dacrate2g=160
+txalpfbyp2g=1
+bphyscale=17
+cckPwrIdxCorr=-15
+pacalidx2g=45
+txgaintbl=1

brcm/brcmfmac4334-sdio.rockchip,rk3318-box.txt

@@ -0,0 +1,116 @@
+# brcm4334 nvram for AP6334/HK6334/SP6334
+# original nvram found in Android sources with name nvram_HS2734A.txt
+# substituted with a new version downloaded from:
+# https://raw.githubusercontent.com/KashaMalaga/proprietary_vendor_samsung/jellybean/n7100/proprietary/system/etc/wifi/nvram_mfg.txt_murata
+# with much improved performance.
+# update 2: modified again using a newer version that comes into vendor partition of a rk3228 tv box
+
+####modify by Broadcom Jerry-nvram_v1.0#####
+manfid=0x2d0
+prodid=0x05c1
+vendid=0x14e4
+devid=0x4380
+boardtype=0x05de
+boardrev=0x1200
+boardnum=22
+macaddr=4c:90:4c:c5:12:38
+sromrev=3
+boardflags=0x10081a01
+xtalfreq=37400
+nocrc=1
+ag0=252
+aa2g=1
+ccode=HK
+pa0itssit=0x20
+pa0b0=0x15a3
+pa0b1=0xfd30
+pa0b2=0xff17
+tssifloor2g=24
+extpagain2g=2
+extpagain5g=2
+cckPwrOffset=8
+rssismf2g=0xf
+rssismc2g=0x9
+rssisav2g=0x1
+rssismf5g=0x9
+rssismc5g=0x9
+rssisav5g=0x1
+pa1lob0=0x1532
+pa1lob1=0xfd5e
+pa1lob2=0xff3e
+tssifloor5gl=26
+pa1b0=0x1542
+pa1b1=0xfd67
+pa1b2=0xff51
+tssifloor5gm=26
+pa1hib0=0x1544
+pa1hib1=0xfd4c
+pa1hib2=0xff42
+tssifloor5gh=26
+PwrOffset40mhz2g=4 
+PwrOffset40mhz5g=-10
+rxpo5g=0
+maxp2ga0=0x52
+ofdm2gpo=0xaaaaaaa2
+mcs2gpo0=0xdddd
+mcs2gpo1=0xdddd
+mcs2gpo2=0xdddd
+mcs2gpo3=0xdddd
+maxp5ga0=0x50
+maxp5gla0=0x49
+maxp5gha0=0x54
+ofdm5gpo=0x44444441
+ofdm5glpo=0x66666663
+ofdm5ghpo=0x55555552
+mcs5gpo0=0x6666
+mcs5gpo1=0x6666
+mcs5glpo0=0x8888
+mcs5glpo1=0x8888
+mcs5ghpo0=0x6666
+mcs5ghpo1=0x6666
+mcs5gpo2=0x6666
+mcs5gpo3=0x6666
+mcs5glpo2=0x8888
+mcs5glpo3=0x8888
+mcs5ghpo2=0x6666
+mcs5ghpo3=0x6666
+pagc2g=0x10
+swctrlmap_2g=0x00010001,0x00420002,0x00020002,0x044202,0x1ff
+swctrlmap_5g=0x00080008,0x00300010,0x00100010,0x044202,0x238
+elna_off_gain_idx_2g=27
+triso2g=4
+triso5g=5
+muxenab=0x10
+dacrate2xen=1
+txalpfbyp=1
+txalpfpu=1
+dacpu.fab.4=1
+aci_detect_en_2g=1
+gain_settle_dly_2g=4
+gain_settle_dly_5g=4
+noise_cal_po_2g=-1
+noise_cal_po_40_2g=-1
+noise_cal_high_gain_2g=73
+noise_cal_nf_substract_val_2g=346
+noise_cal_po_5g=-1
+noise_cal_po_40_5g=-1
+noise_cal_high_gain_5g=73
+noise_cal_nf_substract_val_5g=346
+ofdmdigfilttype2g=3
+ofdmdigfilttype5g=0
+ofdm40digfilttype=5
+cckdigfilttype=24
+iqlocalidx5g=55
+dlocalidx5g=75
+lpbckmode5g=1 
+txiqlopapu5g=0
+iqcalidx5g=50
+txiqlopapu2g=0
+dlorange_lowlimit=5
+loflag=1
+gmgc2g=224
+triso2g.fab.4=6
+btc_params80=0
+btc_params6=10
+btc_params95=53
+

brcm/brcmfmac43362-sdio.txt

@@ -0,0 +1,57 @@
+#AP6210_NVRAM_V1.2_03192013
+manfid=0x2d0
+prodid=0x492
+vendid=0x14e4
+devid=0x4343
+boardtype=0x0598
+
+# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
+#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
+boardrev=0x1307
+boardnum=777
+xtalfreq=26000
+boardflags=0x80201
+boardflags2=0x80
+sromrev=3
+wl0id=0x431b
+macaddr=00:90:4c:07:71:12
+aa2g=1
+ag0=2
+maxp2ga0=74
+cck2gpo=0x2222
+ofdm2gpo=0x44444444
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+pa0maxpwr=56
+
+#P207 PA params
+#pa0b0=5447
+#pa0b1=-658
+#pa0b2=-175<div></div>
+
+#Same PA params for P304,P305, P306, P307
+
+pa0b0=5447
+pa0b1=-607
+pa0b2=-160
+pa0itssit=62
+pa1itssit=62
+
+
+cckPwrOffset=5
+ccode=0
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+triso2g=0
+noise_cal_enable_2g=0
+noise_cal_po_2g=0
+swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
+temp_add=29767
+temp_mult=425
+
+btc_flags=0x6
+btc_params0=5000
+btc_params1=1000
+btc_params6=63
+

brcm/brcmfmac4339-sdio.1CK.txt

@@ -0,0 +1,105 @@
+# Sample NVRAM for BCM94339 WLCSP with eTR,iPA, and eLNA. 
+sromrev=11
+boardrev=0x1100
+boardtype=0x06c9
+boardflags=0x10081401
+boardflags2=0x00000000
+boardflags3=0x08001188
+#boardnum=57410 
+macaddr=00:90:4c:c5:12:38
+ccode=0
+regrev=0
+antswitch=0
+pdgain2g=7
+pdgain5g=7
+tworangetssi2g=0
+tworangetssi5g=0
+vendid=0x14e4
+devid=0x43ae
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+otpimagesize=502
+xtalfreq=37400
+extpagain2g=2
+pdetrange2g=2
+extpagain5g=2
+pdetrange5g=2
+rxgains2gelnagaina0=2
+rxgains2gtrisoa0=6
+rxgains2gtrelnabypa0=1
+rxgains5gelnagaina0=4
+rxgains5gtrisoa0=4
+rxgains5gtrelnabypa0=1
+rxchain=1
+txchain=1
+aa2g=1
+aa5g=1
+tssipos5g=0
+tssipos2g=0
+pa2ga0=0xff5c,0x1914,0xfd11
+pa2gccka0=0xff78,0x1cf7,0xfcac
+pa5ga0=0xff58,0x16dc,0xfd45,0xff61,0x16dc,0xfd44,0xff5d,0x165d,0xfd49,0xff5b,0x15a6,0xfd69
+pa5gbw40a0=0xff62,0x17aa,0xfd30,0xff65,0x17cf,0xfd2f,0xff64,0x1747,0xfd33,0xff60,0x16b8,0xfd54
+pa5gbw80a0=0xff5e,0x1740,0xfd3f,0xff5b,0x16e8,0xfd3d,0xff54,0x1654,0xfd42,0xff58,0x1614,0xfd60
+#pa5ga0=0xff58,0x16ec,0xfd45,0xff61,0x170c,0xfd44,0xff5d,0x16dd,0xfd49,0xff5b,0x1616,0xfd69
+#pa5gbw40a0=0xff62,0x16ca,0xfd30,0xff65,0x16bf,0xfd2f,0xff64,0x1687,0xfd33,0xff60,0x15d8,0xfd54
+#pa5gbw80a0=0xff5e,0x1640,0xfd3f,0xff5b,0x1638,0xfd3d,0xff54,0x15b4,0xfd42,0xff58,0x1534,0xfd60
+# Default Target Power for 2G -- 17dBm(11)/14dBm(54)/13dBm(MCS7)/12dBm(MCS8)/12dBm(MCS9)
+maxp2ga0=74
+maxp5ga0=74,74,74,74
+cckbw202gpo=0x0000
+cckbw20ul2gpo=0x0000
+mcsbw202gpo=0xaa888888
+mcsbw402gpo=0xaa888888
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0066
+tssifloor2g=500
+# Default Target Power for 5G -- 14dBm(54)/13dBm(MCS7)/12dBm(MCS8)/12dBm(MCS9)
+mcsbw205glpo=0xaa888888
+mcsbw405glpo=0xaa888888
+mcsbw805glpo=0xaa888888
+mcsbw205gmpo=0xaa888888
+mcsbw405gmpo=0xaa888888
+mcsbw805gmpo=0xaa888888
+mcsbw205ghpo=0xaa888888
+mcsbw405ghpo=0xaa888888
+mcsbw805ghpo=0xaa888888
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+phycal_tempdelta=25
+cckdigfilttype=2
+swctrlmap_5g=0x00080008,0x00500010,0x00100008,0x000000,0x078
+swctrlmap_2g=0x00010001,0x00220002,0x00020001,0x042202,0x1ff
+swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+#
+# muxenab defined to enable OOB IRQ. Level sensitive interrupt via WL_HOST_WAKE line. 
+muxenab=0x10
+#sd_gpout=0
+#sd_oobonly=1
+#
+rssicorrnorm_c0=-2,0
+rssicorrnorm5g_c0=3,5,2,3,4,2,2,3,1,2,3,1
+## ED threshold level to address the new ETSI requirement - 10/31/2013
+ed_thresh2g=-77
+ed_thresh5g=-77
+#
+paparambwver=1

brcm/brcmfmac4339-sdio.ZP.txt

@@ -0,0 +1,102 @@
+# Sample NVRAM for BCM94339 WLCSP with eTR,iPA, and eLNA. 
+sromrev=11
+boardrev=0x1100
+boardtype=0x06c9
+boardflags=0x10081401
+boardflags2=0x00000000
+boardflags3=0x08001188
+#boardnum=57410 
+macaddr=00:90:4c:c5:12:38
+ccode=0
+regrev=0
+antswitch=0
+pdgain2g=7
+pdgain5g=7
+tworangetssi2g=0
+tworangetssi5g=0
+vendid=0x14e4
+devid=0x43ae
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+otpimagesize=502
+xtalfreq=37400
+extpagain2g=2
+pdetrange2g=2
+extpagain5g=2
+pdetrange5g=2
+rxgains2gelnagaina0=2
+rxgains2gtrisoa0=6
+rxgains2gtrelnabypa0=1
+rxgains5gelnagaina0=4
+rxgains5gtrisoa0=4
+rxgains5gtrelnabypa0=1
+rxchain=1
+txchain=1
+aa2g=1
+aa5g=1
+tssipos5g=0
+tssipos2g=0
+pa2ga0=0xFF47,0x17B5,0xFD2B
+pa2gccka0=0xFF5F,0x1B46,0xFCCC
+pa5ga0=0xff54,0x16ec,0xfd45,0xff52,0x16a1,0xfd4d,0xff46,0x15b7,0xfd5a,0xff56,0x156d,0xfd79
+pa5gbw40a0=0xff59,0x17ca,0xfd30,0xff42,0x163d,0xfd4b,0xff31,0x152e,0xfd55,0xff60,0x16d8,0xfd54
+pa5gbw80a0=0xff56,0x1740,0xfd3f,0xff50,0x1738,0xfd3d,0xff4d,0x16b4,0xfd42,0xff58,0x1634,0xfd60
+# Default Target Power for 2G -- 17dBm(11)/14dBm(54)/13dBm(MCS7)/12dBm(MCS8)/12dBm(MCS9)
+maxp2ga0=74
+maxp5ga0=74,74,74,74
+cckbw202gpo=0x0000
+cckbw20ul2gpo=0x0000
+mcsbw202gpo=0xaa888888
+mcsbw402gpo=0xaa888888
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0066
+tssifloor2g=500
+# Default Target Power for 5G -- 14dBm(54)/13dBm(MCS7)/12dBm(MCS8)/12dBm(MCS9)
+mcsbw205glpo=0xaa866666
+mcsbw405glpo=0xaa866666
+mcsbw805glpo=0xaa866666
+mcsbw205gmpo=0xaa866666
+mcsbw405gmpo=0xaa866666
+mcsbw805gmpo=0xaa866666
+mcsbw205ghpo=0xaa866666
+mcsbw405ghpo=0xaa866666
+mcsbw805ghpo=0xaa866666
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+phycal_tempdelta=25
+cckdigfilttype=2
+swctrlmap_5g=0x00080008,0x00500010,0x00100008,0x000000,0x078
+swctrlmap_2g=0x00010001,0x00220002,0x00020001,0x042202,0x1ff
+swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+#
+# muxenab defined to enable OOB IRQ. Level sensitive interrupt via WL_HOST_WAKE line. 
+muxenab=0x10
+#sd_gpout=0
+#sd_oobonly=1
+#
+rssicorrnorm_c0=-2,0
+rssicorrnorm5g_c0=3,5,2,3,4,2,2,3,1,2,3,1
+## ED threshold level to address the new ETSI requirement - 10/31/2013
+ed_thresh2g=-77
+ed_thresh5g=-77
+#
+paparambwver=1

brcm/brcmfmac4339-sdio.txt

@@ -0,0 +1,102 @@
+# Sample NVRAM for BCM94339 WLCSP with eTR,iPA, and eLNA. 
+sromrev=11
+boardrev=0x1100
+boardtype=0x06c9
+boardflags=0x10081401
+boardflags2=0x00000000
+boardflags3=0x08001188
+#boardnum=57410 
+macaddr=00:90:4c:c5:12:38
+ccode=0
+regrev=0
+antswitch=0
+pdgain2g=7
+pdgain5g=7
+tworangetssi2g=0
+tworangetssi5g=0
+vendid=0x14e4
+devid=0x43ae
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+otpimagesize=502
+xtalfreq=37400
+extpagain2g=2
+pdetrange2g=2
+extpagain5g=2
+pdetrange5g=2
+rxgains2gelnagaina0=2
+rxgains2gtrisoa0=6
+rxgains2gtrelnabypa0=1
+rxgains5gelnagaina0=4
+rxgains5gtrisoa0=4
+rxgains5gtrelnabypa0=1
+rxchain=1
+txchain=1
+aa2g=1
+aa5g=1
+tssipos5g=0
+tssipos2g=0
+pa2ga0=0xFF47,0x17B5,0xFD2B
+pa2gccka0=0xFF5F,0x1B46,0xFCCC
+pa5ga0=0xff54,0x16ec,0xfd45,0xff52,0x16a1,0xfd4d,0xff46,0x15b7,0xfd5a,0xff56,0x156d,0xfd79
+pa5gbw40a0=0xff59,0x17ca,0xfd30,0xff42,0x163d,0xfd4b,0xff31,0x152e,0xfd55,0xff60,0x16d8,0xfd54
+pa5gbw80a0=0xff56,0x1740,0xfd3f,0xff50,0x1738,0xfd3d,0xff4d,0x16b4,0xfd42,0xff58,0x1634,0xfd60
+# Default Target Power for 2G -- 17dBm(11)/14dBm(54)/13dBm(MCS7)/12dBm(MCS8)/12dBm(MCS9)
+maxp2ga0=74
+maxp5ga0=74,74,74,74
+cckbw202gpo=0x0000
+cckbw20ul2gpo=0x0000
+mcsbw202gpo=0xaa888888
+mcsbw402gpo=0xaa888888
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0066
+tssifloor2g=500
+# Default Target Power for 5G -- 14dBm(54)/13dBm(MCS7)/12dBm(MCS8)/12dBm(MCS9)
+mcsbw205glpo=0xaa866666
+mcsbw405glpo=0xaa866666
+mcsbw805glpo=0xaa866666
+mcsbw205gmpo=0xaa866666
+mcsbw405gmpo=0xaa866666
+mcsbw805gmpo=0xaa866666
+mcsbw205ghpo=0xaa866666
+mcsbw405ghpo=0xaa866666
+mcsbw805ghpo=0xaa866666
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+phycal_tempdelta=25
+cckdigfilttype=2
+swctrlmap_5g=0x00080008,0x00500010,0x00100008,0x000000,0x078
+swctrlmap_2g=0x00010001,0x00220002,0x00020001,0x042202,0x1ff
+swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+#
+# muxenab defined to enable OOB IRQ. Level sensitive interrupt via WL_HOST_WAKE line. 
+muxenab=0x10
+#sd_gpout=0
+#sd_oobonly=1
+#
+rssicorrnorm_c0=-2,0
+rssicorrnorm5g_c0=3,5,2,3,4,2,2,3,1,2,3,1
+## ED threshold level to address the new ETSI requirement - 10/31/2013
+ed_thresh2g=-77
+ed_thresh5g=-77
+#
+paparambwver=1

brcm/brcmfmac43430-sdio.txt

@@ -0,0 +1,54 @@
+#AP6212_NVRAM_V1.0_20140603
+# 2.4 GHz, 20 MHz BW mode
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0726
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0726
+boardrev=0x1101
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+xtalfreq=26000
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=90
+txpwrbckof=6
+cckbw202gpo=0x5555
+legofdmbw202gpo=0x77777777
+mcsbw202gpo=0xaaaaaaaa
+
+# OFDM IIR :
+ofdmdigfilttype=7
+# PAPD mode:
+papdmode=2
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+#OOB parameters
+hostwake=0x40
+hostrdy=0x41
+usbrdy=0x03
+usbrdydelay=100
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x10 for Host awake
+muxenab=0x10
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+

brcm/brcmfmac43430a0-sdio.txt

@@ -0,0 +1,54 @@
+#AP6212_NVRAM_V1.0_20140603
+# 2.4 GHz, 20 MHz BW mode
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0726
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0726
+boardrev=0x1101
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+xtalfreq=26000
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=90
+txpwrbckof=6
+cckbw202gpo=0x5555
+legofdmbw202gpo=0x77777777
+mcsbw202gpo=0xaaaaaaaa
+
+# OFDM IIR :
+ofdmdigfilttype=7
+# PAPD mode:
+papdmode=2
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+#OOB parameters
+hostwake=0x40
+hostrdy=0x41
+usbrdy=0x03
+usbrdydelay=100
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x10 for Host awake
+muxenab=0x10
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+

brcm/brcmfmac43455-sdio.txt

@@ -0,0 +1,97 @@
+# Cloned from bcm94345wlpagb_p2xx.txt 
+NVRAMRev=$Rev: 498373 $
+sromrev=11
+vendid=0x14e4
+devid=0x43ab
+manfid=0x2d0
+prodid=0x06e4
+#macaddr=00:90:4c:c5:12:38
+macaddr=b8:27:eb:74:f2:6c
+nocrc=1
+boardtype=0x6e4
+boardrev=0x1304
+
+#XTAL 37.4MHz
+xtalfreq=37400
+
+btc_mode=1
+#------------------------------------------------------
+#boardflags: 5GHz eTR switch by default
+#            2.4GHz eTR switch by default
+#            bit1 for btcoex
+boardflags=0x00480201
+boardflags2=0x40800000
+boardflags3=0x48200100
+phycal_tempdelta=15
+rxchain=1
+txchain=1
+aa2g=1
+aa5g=1
+tssipos5g=1
+tssipos2g=1
+femctrl=0
+AvVmid_c0=1,165,2,100,2,100,2,100,2,100
+pa2ga0=-129,6525,-718
+pa2ga1=-149,4408,-601
+pa5ga0=-185,6836,-815,-186,6838,-815,-184,6859,-815,-184,6882,-818
+pa5ga1=-202,4285,-574,-201,4312,-578,-196,4391,-586,-201,4294,-575
+itrsw=1
+pdoffsetcckma0=2
+pdoffset2gperchan=0,-2,1,0,1,0,1,1,1,0,0,-1,-1,0
+pdoffset2g40ma0=16
+pdoffset40ma0=0x8888
+pdoffset80ma0=0x8888
+extpagain5g=2
+extpagain2g=2
+tworangetssi2g=1
+tworangetssi5g=1
+# LTECX flags
+# WCI2
+ltecxmux=0
+ltecxpadnum=0x0504
+ltecxfnsel=0x22
+ltecxgcigpio=0x32
+
+maxp2ga0=80
+ofdmlrbw202gpo=0x0022
+dot11agofdmhrbw202gpo=0x4442
+mcsbw202gpo=0x98444422
+mcsbw402gpo=0x98444422
+maxp5ga0=82,82,82,82
+mcsbw205glpo=0xb9555000
+mcsbw205gmpo=0xb9555000
+mcsbw205ghpo=0xb9555000
+mcsbw405glpo=0xb9555000
+mcsbw405gmpo=0xb9555000
+mcsbw405ghpo=0xb9555000
+mcsbw805glpo=0xb9555000
+mcsbw805gmpo=0xb9555000
+mcsbw805ghpo=0xb9555000
+
+swctrlmap_2g=0x00000000,0x00000000,0x00000000,0x010000,0x3ff
+swctrlmap_5g=0x00100010,0x00200020,0x00200020,0x010000,0x3fe
+swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x3
+swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x3
+
+vcodivmode=1
+deadman_to=481500000
+
+ed_thresh2g=-54
+ed_thresh5g=-54
+eu_edthresh2g=-54
+eu_edthresh5g=-54
+ldo1=4
+rawtempsense=0x1ff
+cckPwrIdxCorr=3
+cckTssiDelay=150
+ofdmTssiDelay=150
+txpwr2gAdcScale=1
+txpwr5gAdcScale=1
+dot11b_opts=0x3aa85
+cbfilttype=1
+fdsslevel_ch11=6
+
+# Improved Bluetooth coexistence parameters from Cypress
+btc_mode=1
+btc_params8=0x4e20
+btc_params1=0x7530

brcm/brcmfmac43456-sdio.txt

@@ -0,0 +1,99 @@
+#AP6256_NVRAM_V1.1_08252017
+# Cloned from bcm94345wlpagb_p2xx.txt 
+NVRAMRev=$Rev: 498373 $
+sromrev=11
+vendid=0x14e4
+devid=0x43ab
+manfid=0x2d0
+prodid=0x06e4
+macaddr=00:90:4c:c5:12:38
+nocrc=1
+boardtype=0x6e4
+boardrev=0x1304
+xtalfreq=37400
+#boardflags: 5GHz eTR switch by default
+#            2.4GHz eTR switch by default
+#            bit1 for btcoex
+boardflags=0x00480201
+boardflags2=0x40800000
+boardflags3=0x48200100
+#phycal_tempdelta=15
+rxchain=1
+txchain=1
+aa2g=1
+aa5g=1
+tssipos5g=1
+tssipos2g=1
+femctrl=0
+AvVmid_c0=0,157,1,126,1,126,1,126,1,126
+pa2ga0=-164,5427,-623
+pa2ga1=-165,3699,-515
+#pa5ga0=-146,5304,-612,-140,5341,-613,-166,5326,-633,-154,5272,-621
+#pa5ga0=-134,5385,-609,-132,5359,-605,-154,5360,-621,-140,5288,-604
+pa5ga0=-127,5380,-603,-130,5395,-608,-148,5369,-622,-147,5222,-608
+pa5ga1=-161,3544,-499,-166,3543,-497,-169,3569,-497,-171,3598,-498
+itrsw=1
+pdoffset2g40ma0=10
+pdoffset40ma0=0xaaaa
+pdoffset80ma0=0xaaaa
+extpagain5g=2
+extpagain2g=2
+tworangetssi2g=0
+tworangetssi5g=0
+# LTECX flags
+# WCI2
+ltecxmux=0
+ltecxpadnum=0x0504
+ltecxfnsel=0x22
+ltecxgcigpio=0x32
+
+pacalshift5g=0,0,3
+
+maxp2ga0=70
+cckbw202gpo=0x1000
+cckbw20ul2gpo=0x1000
+ofdmlrbw202gpo=0x0033
+dot11agofdmhrbw202gpo=0x2222
+mcsbw202gpo=0x99333322
+
+cckdigfilttype=5
+
+#maxp5ga0=82,82,82,82
+#mcsbw205glpo=0x99555000
+#mcsbw205gmpo=0x99555000
+#mcsbw205ghpo=0x99555000
+#mcsbw405glpo=0x99555000
+#mcsbw405gmpo=0x99555000
+#mcsbw405ghpo=0x99555000
+#mcsbw805glpo=0x99555000
+#mcsbw805gmpo=0x99555000
+#mcsbw805ghpo=0x99555000
+
+maxp5ga0=73,74,73,73     
+mcsbw205glpo=0x8a875444
+mcsbw205gmpo=0x8a875444
+mcsbw205ghpo=0x8a875444
+
+mcsbw405glpo=0xda844333
+mcsbw405gmpo=0xdb844333
+mcsbw405ghpo=0xda844333
+
+mcsbw805glpo=0xdb555444
+mcsbw805gmpo=0xda555444
+mcsbw805ghpo=0xda555444
+
+
+swctrlmap_2g=0x00040004,0x00020002,0x00040004,0x010a02,0x1ff
+swctrlmap_5g=0x00100010,0x00200020,0x00200020,0x010a02,0x2f4
+swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x3
+swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x3
+
+vcodivmode=1
+deadman_to=481500000
+ed_thresh2g=-54
+ed_thresh5g=-54
+eu_edthresh2g=-54
+eu_edthresh5g=-54
+
+
+muxenab=0x10

brcm/brcmfmac4356-sdio-nanopi-m4v2.txt

@@ -0,0 +1,126 @@
+# Sample variables file for BCM94356Z NGFF 22x30mm iPA, iLNA board with PCIe for production package
+NVRAMRev=$Rev: 492104 $
+#4356 chip = 4354 A2 chip
+sromrev=11
+boardrev=0x1102
+boardtype=0x073e
+boardflags=0x02400201
+#0x2000 enable 2G spur WAR
+boardflags2=0x00802000
+boardflags3=0x0000000a
+#boardflags3 0x00000100 /* to read swctrlmap from nvram*/
+#define BFL3_5G_SPUR_WAR   0x00080000   /* enable spur WAR in 5G band */
+#define BFL3_AvVim   0x40000000   /* load AvVim from nvram */
+macaddr=00:90:4c:1a:10:01
+ccode=0x5854
+regrev=205
+antswitch=0
+pdgain5g=4
+pdgain2g=4
+tworangetssi2g=0
+tworangetssi5g=0
+paprdis=0
+femctrl=10
+vendid=0x14e4
+devid=0x43ec
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+otpimagesize=502
+xtalfreq=37400
+rxgains2gelnagaina0=0
+rxgains2gtrisoa0=7
+rxgains2gtrelnabypa0=0
+rxgains5gelnagaina0=0
+rxgains5gtrisoa0=11
+rxgains5gtrelnabypa0=0
+rxgains5gmelnagaina0=0
+rxgains5gmtrisoa0=13
+rxgains5gmtrelnabypa0=0
+rxgains5ghelnagaina0=0
+rxgains5ghtrisoa0=12
+rxgains5ghtrelnabypa0=0
+rxgains2gelnagaina1=0
+rxgains2gtrisoa1=7
+rxgains2gtrelnabypa1=0
+rxgains5gelnagaina1=0
+rxgains5gtrisoa1=10
+rxgains5gtrelnabypa1=0
+rxgains5gmelnagaina1=0
+rxgains5gmtrisoa1=11
+rxgains5gmtrelnabypa1=0
+rxgains5ghelnagaina1=0
+rxgains5ghtrisoa1=11
+rxgains5ghtrelnabypa1=0
+rxchain=3
+txchain=3
+aa2g=3
+aa5g=3
+agbg0=2
+agbg1=2
+aga0=2
+aga1=2
+tssipos2g=1
+extpagain2g=2
+tssipos5g=1
+extpagain5g=2
+tempthresh=255
+tempoffset=255
+rawtempsense=0x1ff
+pa2ga0=-147,6192,-705
+pa2ga1=-161,6041,-701
+pa5ga0=-194,6069,-739,-188,6137,-743,-185,5931,-725,-171,5898,-715
+pa5ga1=-190,6248,-757,-190,6275,-759,-190,6225,-757,-184,6131,-746
+subband5gver=0x4
+pdoffsetcckma0=0x4
+pdoffsetcckma1=0x4
+pdoffset40ma0=0x0000
+pdoffset80ma0=0x0000
+pdoffset40ma1=0x0000
+pdoffset80ma1=0x0000
+maxp2ga0=76
+maxp5ga0=74,74,74,74
+maxp2ga1=76
+maxp5ga1=74,74,74,74
+cckbw202gpo=0x0000
+cckbw20ul2gpo=0x0000
+mcsbw202gpo=0x99644422
+mcsbw402gpo=0x99644422
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0022
+mcsbw205glpo=0x88766663
+mcsbw405glpo=0x88666663
+mcsbw805glpo=0xbb666665
+mcsbw205gmpo=0xd8666663
+mcsbw405gmpo=0x88666663
+mcsbw805gmpo=0xcc666665
+mcsbw205ghpo=0xdc666663
+mcsbw405ghpo=0xaa666663
+mcsbw805ghpo=0xdd666665
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+phycal_tempdelta=255
+temps_period=15
+temps_hysteresis=15
+rssicorrnorm_c0=4,4
+rssicorrnorm_c1=4,4
+rssicorrnorm5g_c0=1,2,3,1,2,3,6,6,8,6,6,8
+rssicorrnorm5g_c1=1,2,3,2,2,2,7,7,8,7,7,8
+

brcm/brcmfmac4356-sdio.txt

@@ -0,0 +1,126 @@
+# Sample variables file for BCM94356Z NGFF 22x30mm iPA, iLNA board with PCIe for production package
+NVRAMRev=$Rev: 492104 $
+#4356 chip = 4354 A2 chip
+sromrev=11
+boardrev=0x1102
+boardtype=0x073e
+boardflags=0x02400201
+#0x2000 enable 2G spur WAR
+boardflags2=0x00802000
+boardflags3=0x0000000a
+#boardflags3 0x00000100 /* to read swctrlmap from nvram*/
+#define BFL3_5G_SPUR_WAR   0x00080000   /* enable spur WAR in 5G band */
+#define BFL3_AvVim   0x40000000   /* load AvVim from nvram */
+macaddr=00:90:4c:1a:10:01
+ccode=0x5854
+regrev=205
+antswitch=0
+pdgain5g=4
+pdgain2g=4
+tworangetssi2g=0
+tworangetssi5g=0
+paprdis=0
+femctrl=10
+vendid=0x14e4
+devid=0x43ec
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+otpimagesize=502
+xtalfreq=37400
+rxgains2gelnagaina0=0
+rxgains2gtrisoa0=7
+rxgains2gtrelnabypa0=0
+rxgains5gelnagaina0=0
+rxgains5gtrisoa0=11
+rxgains5gtrelnabypa0=0
+rxgains5gmelnagaina0=0
+rxgains5gmtrisoa0=13
+rxgains5gmtrelnabypa0=0
+rxgains5ghelnagaina0=0
+rxgains5ghtrisoa0=12
+rxgains5ghtrelnabypa0=0
+rxgains2gelnagaina1=0
+rxgains2gtrisoa1=7
+rxgains2gtrelnabypa1=0
+rxgains5gelnagaina1=0
+rxgains5gtrisoa1=10
+rxgains5gtrelnabypa1=0
+rxgains5gmelnagaina1=0
+rxgains5gmtrisoa1=11
+rxgains5gmtrelnabypa1=0
+rxgains5ghelnagaina1=0
+rxgains5ghtrisoa1=11
+rxgains5ghtrelnabypa1=0
+rxchain=3
+txchain=3
+aa2g=3
+aa5g=3
+agbg0=2
+agbg1=2
+aga0=2
+aga1=2
+tssipos2g=1
+extpagain2g=2
+tssipos5g=1
+extpagain5g=2
+tempthresh=255
+tempoffset=255
+rawtempsense=0x1ff
+pa2ga0=-147,6192,-705
+pa2ga1=-161,6041,-701
+pa5ga0=-194,6069,-739,-188,6137,-743,-185,5931,-725,-171,5898,-715
+pa5ga1=-190,6248,-757,-190,6275,-759,-190,6225,-757,-184,6131,-746
+subband5gver=0x4
+pdoffsetcckma0=0x4
+pdoffsetcckma1=0x4
+pdoffset40ma0=0x0000
+pdoffset80ma0=0x0000
+pdoffset40ma1=0x0000
+pdoffset80ma1=0x0000
+maxp2ga0=76
+maxp5ga0=74,74,74,74
+maxp2ga1=76
+maxp5ga1=74,74,74,74
+cckbw202gpo=0x0000
+cckbw20ul2gpo=0x0000
+mcsbw202gpo=0x99644422
+mcsbw402gpo=0x99644422
+dot11agofdmhrbw202gpo=0x6666
+ofdmlrbw202gpo=0x0022
+mcsbw205glpo=0x88766663
+mcsbw405glpo=0x88666663
+mcsbw805glpo=0xbb666665
+mcsbw205gmpo=0xd8666663
+mcsbw405gmpo=0x88666663
+mcsbw805gmpo=0xcc666665
+mcsbw205ghpo=0xdc666663
+mcsbw405ghpo=0xaa666663
+mcsbw805ghpo=0xdd666665
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+phycal_tempdelta=255
+temps_period=15
+temps_hysteresis=15
+rssicorrnorm_c0=4,4
+rssicorrnorm_c1=4,4
+rssicorrnorm5g_c0=1,2,3,1,2,3,6,6,8,6,6,8
+rssicorrnorm5g_c1=1,2,3,2,2,2,7,7,8,7,7,8
+

brcm/brcmfmac4359-sdio.txt

@@ -0,0 +1,226 @@
+#AP6359SA_NVRAM_V1.1_20170328
+# BCM4359 WLBGA iPA, iLNA board for bringup -AP6359SA_V1.0NVRAM
+NVRAMRev=$Rev: 528206 $
+cckdigfilttype=5
+#cckdigfilttype=4 (default)
+#valid ofdm filter types are 0 and 1
+ofdmfilttype_2gbe=127
+ofdmfilttype_5gbe=127
+sromrev=11
+boardrev=0x1301
+boardtype=0x0812
+# JIRA:SW4349-945 MANDATORY! Update makefile in case you touch bfl
+#boardflags=0x10081201
+boardflags=0x00080201
+boardflags2=0x40800000
+boardflags3=0x48700106
+#boardnum=57410 
+macaddr=00:90:4c:27:80:01
+ccode=0
+regrev=0
+antswitch=0
+pdgain5g=0
+pdgain2g=0
+lowpowerrange2g=0
+lowpowerrange5g=0
+tworangetssi2g=0
+tworangetssi5g=0
+# Low Power Range start value: 0dBm
+olpc_thresh2g=0
+olpc_thresh5g=0
+AvVmid_c0=2,130,2,130,2,130,2,130,2,130
+AvVmid_c1=2,130,2,130,2,130,2,130,2,130
+# JIRA:SW4349-945 MANDATORY! Update makefile in case you touch femctl
+femctrl=14
+vendid=0x14e4
+devid=0x43ef
+manfid=0x2d0
+#prodid=0x052e
+nocrc=1
+#btc_mode=1
+btc_params82=0x1a0
+otpimagesize=502
+xtalfreq=37400
+rxgains2gelnagaina0=3
+rxgains2gtrisoa0=7
+rxgains2gtrelnabypa0=1
+rxgains5gelnagaina0=3
+rxgains5gtrisoa0=6
+rxgains5gtrelnabypa0=1
+rxgains5gmelnagaina0=3
+rxgains5gmtrisoa0=6
+rxgains5gmtrelnabypa0=1
+rxgains5ghelnagaina0=3
+rxgains5ghtrisoa0=6
+rxgains5ghtrelnabypa0=1
+rxgains2gelnagaina1=3
+rxgains2gtrisoa1=7
+rxgains2gtrelnabypa1=1
+rxgains5gelnagaina1=3
+rxgains5gtrisoa1=6
+rxgains5gtrelnabypa1=1
+rxgains5gmelnagaina1=3
+rxgains5gmtrisoa1=6
+rxgains5gmtrelnabypa1=1
+rxgains5ghelnagaina1=3
+rxgains5ghtrisoa1=6
+rxgains5ghtrelnabypa1=1
+rxchain=3
+txchain=3
+aa2g=3
+aa5g=3
+agbg0=2
+agbg1=2
+aga0=2
+aga1=2
+tssipos2g=1
+extpagain2g=2
+tssipos5g=1
+extpagain5g=2
+tempthresh=255
+tempoffset=255
+rawtempsense=0x1ff
+fdss_interp_en=1
+#fdss_level_2g=3,3
+fdss_level_5g=4,4
+#pa2gccka0=-186,8076,-976
+#pa2gccka1=-217,7061,-881
+#pa2gccka2=-67,9864,-1253
+#pa2gccka3=-115,9164,-1225
+#pa2ga0=-196,6950,-832
+#pa2ga1=-204,6710,-809
+#pa2ga2=-220,4557,-593
+#pa2ga3=-218,4596,-601
+pa2ga0=-178,6979,-820
+pa2ga1=-169,7256,-837
+pa2ga2=-220,4685,-607
+pa2ga3=-218,4724,-615
+#pa5ga0=-191,6865,-844,-169,7525,-907,-168,7768,-938,-192,7073,-871
+#pa5ga1=-182,7580,-919,-188,7614,-931,-219,6536,-818,-202,7220,-895
+#pa5ga2=-220,4437,-628,-183,5005,-678,-229,4048,-551,-223,4448,-611
+#pa5ga3=-263,3914,-566,-224,4649,-640,-230,4385,-596,-154,6488,-866
+pa5ga0=-201,6882,-843,-191,7173,-871,-193,7048,-861,-181,7214,-866
+pa5ga1=-214,6467,-801,-210,6642,-821,-204,6742,-831,-204,6651,-819
+pa5ga2=-220,4616,-647,-183,5184,-694,-229,4227,-571,-223,4627,-631
+pa5ga3=-263,4170,-599,-224,4905,-668,-230,4641,-625,-154,6744,-885
+#pa5gbw4080a0=-201,6883,-859,-198,7088,-881,-202,6968,-870,-210,6522,-820
+#pa5gbw4080a1=-217,6626,-832,-201,7517,-932,-201,7251,-896,-184,7500,-917
+#pa5gbw4080a2=-272,3585,-525,-193,5404,-740,-229,4201,-572,-230,4036,-550
+#pa5gbw4080a3=-278,3361,-486,-230,4794,-662,-268,3605,-508,-276,3337,-478
+maxp2ga0=70
+maxp2ga1=72
+maxp5ga0=61,61,62,62
+maxp5ga1=61,61,62,60
+subband5gver=0x4
+paparambwver=3
+pdoffset2g40mvalid=0
+cckpwroffset0=0x3
+cckpwroffset1=0x3
+pdoffset2g40ma0=0x2
+pdoffset2g40ma1=0x3
+pdoffset40ma0=0x0022
+pdoffset80ma0=0xceff
+pdoffset40ma1=0x0123
+pdoffset80ma1=0xdfff
+cckbw202gpo=0
+cckbw20ul2gpo=0
+mcsbw202gpo=0x44444444
+mcsbw402gpo=0x44444444
+dot11agofdmhrbw202gpo=0x2222
+ofdmlrbw202gpo=0x0000
+mcsbw205glpo=0x33233333
+mcsbw405glpo=0x33233333
+mcsbw805glpo=0x88888888
+mcsbw1605glpo=0
+mcsbw205gmpo=0x22222223
+mcsbw405gmpo=0x22444444
+mcsbw805gmpo=0x8AAAAAAB
+mcsbw1605gmpo=0
+mcsbw205ghpo=0x44333333
+mcsbw405ghpo=0x44444444
+mcsbw805ghpo=0x98888888
+mcsbw1605ghpo=0
+mcslr5glpo=0x0000
+mcslr5gmpo=0x0000
+mcslr5ghpo=0x0000
+sb20in40hrpo=0x0
+sb20in80and160hr5glpo=0x0
+sb40and80hr5glpo=0x0
+sb20in80and160hr5gmpo=0x0
+sb40and80hr5gmpo=0x0
+sb20in80and160hr5ghpo=0x0
+sb40and80hr5ghpo=0x0
+sb20in40lrpo=0x0
+sb20in80and160lr5glpo=0x0
+sb40and80lr5glpo=0x0
+sb20in80and160lr5gmpo=0x0
+sb40and80lr5gmpo=0x0
+sb20in80and160lr5ghpo=0x0
+sb40and80lr5ghpo=0x0
+dot11agduphrpo=0x0
+dot11agduplrpo=0x0
+phycal_tempdelta=255
+temps_period=15
+temps_hysteresis=15
+ltecxmux=0
+ltecxpadnum=0x0504
+ltecxfnsel=0x44
+ltecxgcigpio=0x04
+#OOB params
+#device_wake_opt=1
+#host_wake_opt=0
+#swctrlmap_2g=0x00000808,0x30300000,0x10100000,0x023010,0x1f8								
+#swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x003
+#swctrlmap_5g=0x00004040,0x80800000,0x00000000,0x000000,0x1ff								
+#swctrlmapext_5g=0x00000000,0x01010000,0x01010000,0x000000,0x001
+swctrlmap_2g=0x00000808,0x00001010,0x00001010,0x020010,0x1f8
+swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x003
+swctrlmap_5g=0x00004040,0x00000000,0x00000000,0x000000,0x1ff								
+swctrlmapext_5g=0x00000000,0x00000101,0x00000101,0x000000,0x001
+#fem_table_init_val=0x0c180000,0x00000000
+rssi_delta_5gl_c0=3,3,2,2,5,5
+rssi_delta_5gml_c0=0,2,0,2,3,5
+rssi_delta_5gmu_c0=0,2,0,2,3,5
+rssi_delta_5gh_c0=2,5,2,5,5,8
+rssi_delta_5gl_c1=1,1,2,2,3,3
+rssi_delta_5gml_c1=-1,1,0,2,1,3
+rssi_delta_5gmu_c1=-1,1,0,2,1,3
+rssi_delta_5gh_c1=0,3,2,5,3,6
+rssi_delta_2g_c0=4,5,4,5
+rssi_delta_2g_c1=2,3,2,3
+
+#avs_enab=1
+
+# ###########  BTC Dynctl profile params  ############
+# flags:bit0 - dynctl enabled, bit1 dynamic desense, bit2 dynamic mode
+btcdyn_flags=0x7
+btcdyn_dflt_dsns_level=0
+btcdyn_low_dsns_level=0
+btcdyn_mid_dsns_level=7
+btcdyn_high_dsns_level=2
+btcdyn_default_btc_mode=5
+btcdyn_btrssi_hyster=2
+# --- number of rows in the array vars below ---
+btcdyn_msw_rows=3
+btcdyn_dsns_rows=2
+# --- mode switch data rows (max is 4) ---
+btcdyn_msw_row0=1,8,0,-50,-100
+btcdyn_msw_row1=1,4,0,-55,-100
+btcdyn_msw_row2=1,0,0,-70,-100
+#btcdyn_msw_row3=1,-4,0,-70,-100
+# --- desense switching data rows (max is 4) ---
+#btcdyn_dsns_row0=5,8,0,-40,-40
+btcdyn_dsns_row0=5,4,0,-60,-60
+btcdyn_dsns_row1=5,0,0,0,-75
+powoffs2gtna0=1,3,3,1,0,0,1,2,2,2,1,1,0,0
+powoffs2gtna1=-1,1,1,1,0,0,1,2,3,2,2,0,0,0
+#new Jan 4th
+#eps_shift0=-1,-6,-1,-5
+#eps_shift1=-4,-6,-1,-2
+#eps_shift2=-1,9,-2,-6
+muxenab=0x10
+
+#bandedge
+fdss_level_2g=4,4
+fdss_level_5g=5,5
+fdss_interp_en=1

brcm/config.txt

@@ -0,0 +1,4 @@
+PM=0
+nv_by_chip=1 \
+43362 1 nvram_ap6210.txt
+43430 0 nvram_ap6212.txt

bt_configure_pskey.ini

@@ -0,0 +1,155 @@
+#==============================================================================================================================
+# [Bluetooth Pskey]__[Marlin3]_[Total Length=160]_[Used Length=62]_[Ver=0.10]_[20170804]
+#==============================================================================================================================
+#------------------------------------------------------------------------------------------------------------------------------
+#[1.COMMON]__[Total Length=44]_[Used Length=33]_[Number of Entries=12]
+#------------------------------------------------------------------------------------------------------------------------------
+#[1.01]__/L=4
+device_class = 0x001F00
+
+#[1.02]__/L=16
+feature_set = 0xBF, 0xFF, 0x8D, 0xFE, 0xDB, 0x3D, 0x7B, 0x87, 0xFF, 0xA7, 0xFF, 0x7F, 0x00, 0xE0, 0xF7, 0x3E
+
+#[1.03]__/L=6
+device_addr = 0x6D, 0x6D, 0x8E, 0x8E, 0x8F, 0x8F
+
+#[1.04]__/L=2
+comp_id = 0x01EC
+
+#[1.05]__/L=1
+g_sys_uart0_communication_supported = 1
+
+#[1.06]__/L=1
+cp2_log_mode= 1
+
+#[1.07]__/L=1
+LogLevel = 0xFF
+
+#[1.08]__/L=1
+g_central_or_perpheral = 0
+
+#[1.09]__/L=2
+Log_BitMask = 0xFFFF
+
+#[1.10]__/L=1
+super_ssp_enable = 0
+
+#[1.11]__/L=1
+common_rfu_b3 = 0
+
+#[1.12]__/L=8
+common_rfu_w = 0x00000000, 0x00000000
+#------------------------------------------------------------------------------------------------------------------------------
+#[2.LE]__[Total Length=8]_[Used Length=0]_[Number of Entries=1]
+#------------------------------------------------------------------------------------------------------------------------------
+#[2.01]__/L=8
+le_rfu_w = 0x00000000, 0x000000000
+#------------------------------------------------------------------------------------------------------------------------------
+#[3.LMP]__[Total Length=8]_[Used Length=0]_[Number of Entries=1]
+#------------------------------------------------------------------------------------------------------------------------------
+#[3.01]__/L=8
+lmp_rfu_w = 0x00000000, 0x000000000
+#------------------------------------------------------------------------------------------------------------------------------
+#[4.LC]__[Total Length=8]_[Used Length=0]_[Number of Entries=1]
+#------------------------------------------------------------------------------------------------------------------------------
+#[4.01]__/L=8
+lc_rfu_w = 0x00000000, 0x000000000
+#------------------------------------------------------------------------------------------------------------------------------
+#[5.AUDIO]__[Total Length=20]_[Used Length=9]_[Number of Entries=9]
+#------------------------------------------------------------------------------------------------------------------------------
+#[5.01]__/L=2
+g_wbs_nv_117 = 0x004D
+
+#[5.02]__/L=2
+g_wbs_nv_118 = 0x0166
+
+#[5.03]__/L=2
+g_nbv_nv_117 = 0x004D
+
+#[5.04]__/L=2
+g_nbv_nv_118 = 0x0166
+
+#[5.05]__/L=1
+g_sys_sco_transmit_mode = 0
+
+#[5.06]__/L=1
+audio_rfu_b1 = 0
+
+#[5.07]__/L=1
+audio_rfu_b2 = 0
+
+#[5.08]__/L=1
+audio_rfu_b3 = 0
+
+#[5.09]__/L=8
+audio_rfu_w = 0x00000000, 0x00000000
+#------------------------------------------------------------------------------------------------------------------------------
+#[6.POWER]__[Total Length=12]_[Used Length=3]_[Number of Entries=5]
+#------------------------------------------------------------------------------------------------------------------------------
+#[6.01]__/L=1
+g_sys_sleep_in_standby_supported = 1
+
+#[6.02]__/L=1
+g_sys_sleep_master_supported = 1
+
+#[6.03]__/L=1
+g_sys_sleep_slave_supported = 1
+
+#[6.04]__/L=1
+power_rfu_b1 = 0
+
+#[6.05]__/L=8
+power_rfu_w = 0x00000000, 0x00000000
+#------------------------------------------------------------------------------------------------------------------------------
+#[7.BB]__[Total Length=16]_[Used Length=8]_[Number of Entries=6]
+#------------------------------------------------------------------------------------------------------------------------------
+#[7.01]__/L=4
+win_ext = 40
+
+#[7.02]__/L=1
+edr_tx_edr_delay = 6
+
+#[7.03]__/L=1
+edr_rx_edr_delay = 8
+
+#[7.04]__/L=1
+tx_delay = 12
+
+#[7.05]__/L=1
+rx_delay = 34
+
+#[7.06]__/L=8
+bb_rfu_w = 0x00000000, 0x00000000
+#------------------------------------------------------------------------------------------------------------------------------
+#[8.MODEM]__[Total Length=12]_[Used Length=3]_[Number of Entries=5]
+#------------------------------------------------------------------------------------------------------------------------------
+#[8.01]__/L=1
+agc_mode = 0
+
+#[8.02]__/L=1
+diff_or_eq = 0xFF
+
+#[8.03]__/L=1
+ramp_mode = 0
+
+#[8.04]__/L=1
+modem_rfu_b1= 0
+
+#[8.05]__/L=8
+modem_rfu_w = 0x00000000, 0x00000000
+#------------------------------------------------------------------------------------------------------------------------------
+#[9.OTHER]__[Total Length=32]_[Used Length=24]_[Number of Entries=4]
+#------------------------------------------------------------------------------------------------------------------------------
+#[9.01]__/L=4
+BQB_BitMask_1 = 0x00000000
+
+#[9.02]__/L=4
+BQB_BitMask_2 = 0x00000000
+
+#[9.03]__/L=16
+bt_coex_threshold = 0x04E2, 0x1F40, 0x0020, 0x00C8, 0x0006, 0x0000, 0x0000, 0x0000
+
+#[9.04]__/L=8
+other_rfu_w = 0x00000000, 0x00000000
+#------------------------------------------------------------------------------------------------------------------------------
+

bt_configure_rf.ini

@@ -0,0 +1,66 @@
+#------------------------------------------------------------------------------------------------------------------------------
+#[BT_RF_CONFIG]__[Marlin3]_[Total Length=252]_[Used Length=231]_[Ver=0.10]_[20170804]
+#------------------------------------------------------------------------------------------------------------------------------
+#------------------------------------------------------------------------------------------------------------------------------
+#[1.BT_RF_A]__[Total Length=112]_[Used Length=112]_[Number of Entries=5]_[Max_Power=10]_[Step=2]
+#------------------------------------------------------------------------------------------------------------------------------
+#[1.01]__/L=12
+g_GainValue_A = 0xE000, 0xE000, 0xE000, 0xE000, 0xE000, 0xE000
+
+#[1.02]__/L=20
+g_ClassicPowerValue_A = 0x4115, 0x3A15, 0x3415, 0x2E15, 0x2715, 0x2115, 0x1715, 0x1115, 0x0B15, 0x0715
+
+#[1.03]__/L=32
+g_LEPowerValue_A = 0x3B15, 0x3715, 0x3315, 0x2F15, 0x2B15, 0x2715, 0x2315, 0x1F15, 0x1B15, 0x1715, 0x1315, 0x0F15, 0x0B15, 0x0815, 0x0415, 0x0015
+
+#[1.04]__/L=32
+g_BRChannelpwrvalue_A = 0x0615, 0x0615, 0x0615, 0x0615, 0x0615, 0x0615, 0x0615, 0x0615
+g_EDRChannelpwrvalue_A = 0x0615, 0x0615, 0x0615, 0x0715, 0x0715, 0x0715, 0x0715, 0x0715
+
+#[1.05]__/L=16
+g_LEChannelpwrvalue_A = 0x1515, 0x1515, 0x1515, 0x1515, 0x1515, 0x1515, 0x1515, 0x1515
+#------------------------------------------------------------------------------------------------------------------------------
+#[2.BT_RF_B]__[Total Length=112]_[Used Length=112]_[Number of Entries=5]_[Max_Power=20]_[Step=2]
+#------------------------------------------------------------------------------------------------------------------------------
+#[2.01]__/L=12
+g_GainValue_B = 0xE000, 0xE000, 0xE000, 0xE000, 0xE000, 0xE000
+
+#[2.02]__/L=20
+g_ClassicPowerValue_B = 0x4915, 0x4315, 0x4115, 0x3915, 0x3115, 0x2A15, 0x2215, 0x1B15, 0x1415, 0x0E15
+
+#[2.03]__/L=32
+g_LEPowerValue_B = 0x4B15, 0x4B15, 0x4B15, 0x4B15, 0x4B15, 0x4615, 0x4015, 0x3B15, 0x3615, 0x3015, 0x2B15, 0x2615, 0x2015, 0x1A15, 0x1415, 0x0E15
+
+#[2.04]__/L=32
+g_BRChannelpwrvalue_B = 0x0815, 0x0915, 0x0C15, 0x0C15, 0x0C15, 0x0C15, 0x0C15, 0x0B15
+g_EDRChannelpwrvalue_B =0x0A15, 0x0B15, 0x0D15, 0x0E15, 0x0E15, 0x0E15, 0x0E15, 0x0D15
+
+#[2.05]__/L=16
+g_LEChannelpwrvalue_B = 0x0E15,0x0E15,0x1115,0x1115,0x1115,0x1115,0x1115,0x1015
+
+#------------------------------------------------------------------------------------------------------------------------------
+#[3.BT_RF_COMMON]__[Total Length=28]_[Used Length=7]_[Number of Entries=8]
+#------------------------------------------------------------------------------------------------------------------------------
+#[3.01]__/L=2
+LE_fix_powerword = 0x00
+
+#[3.02]__/L=1
+Classic_pc_by_channel = 0xFF
+#[3.03]__/L=1
+LE_pc_by_channel = 0xFF
+
+#[3.04]__/L=1
+RF_switch_mode = 0x02
+
+#[3.05]__/L=1
+Data_Capture_Mode = 0x00
+
+#[3.06]__/L=1
+Analog_IQ_Debug_Mode = 0x00
+
+#[3.07]__/L=1
+RF_common_rfu_b3 = 0x55
+
+#[3.08]__/L=20
+RF_common_rfu_w= 0x555F4334, 0x55555555, 0x55555555, 0x55555555, 0x55555555
+