Files
BPI-CM9-Linux/build/patch/u-boot/u-boot-genio/0022-dts-radxa-nio-12l-enable-mmc1.patch

72 lines
1.7 KiB
Diff

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Julien Massot <[email protected]>
Date: Fri, 7 Mar 2025 10:05:08 +0100
Subject: dts: radxa-nio-12l: enable mmc1
Enable mmc1 so we have sdcard enabled in u-boot
---
arch/arm/dts/genio-1200-radxa-nio-12l.dtsi | 43 ++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm/dts/genio-1200-radxa-nio-12l.dtsi b/arch/arm/dts/genio-1200-radxa-nio-12l.dtsi
index 111111111111..222222222222 100644
--- a/arch/arm/dts/genio-1200-radxa-nio-12l.dtsi
+++ b/arch/arm/dts/genio-1200-radxa-nio-12l.dtsi
@@ -195,6 +195,32 @@
bias-disable;
};
};
+
+ mmc1_default_pins: mmc1-default-pins {
+ pins-clk {
+ pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ drive-strength = <8>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+ <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+ <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+ <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+ <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ drive-strength = <8>;
+ input-enable;
+ };
+ };
+
+ mmc1_pins_detect: mmc1-detect-pins {
+ pins-insert {
+ pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+ bias-pull-up;
+ };
+ };
};
&watchdog {
@@ -282,3 +308,20 @@
};
};
};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_default_pins>, <&mmc1_pins_detect>;
+ bus-width = <4>;
+ max-frequency = <200000000>;
+ cap-sd-highspeed;
+ cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+ no-mmc;
+ no-sdio;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ /*FIXME: supply is provided by mt6360 ldo5 and 3*/
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_3p3v>;
+ status = "okay";
+};
--
Armbian