821 lines
21 KiB
C
821 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2008 - 2009
|
|
* Windriver, <www.windriver.com>
|
|
* Tom Rix <[email protected]>
|
|
*
|
|
* Copyright 2011 Sebastian Andrzej Siewior <[email protected]>
|
|
*
|
|
* Copyright 2014 Linaro, Ltd.
|
|
* Rob Herring <[email protected]>
|
|
*/
|
|
#include <command.h>
|
|
#include <config.h>
|
|
#include <env.h>
|
|
#include <errno.h>
|
|
#include <fastboot.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <linux/printk.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/composite.h>
|
|
#include <linux/compiler.h>
|
|
#include <g_dnl.h>
|
|
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
#include <amlogic/partition_table.h>
|
|
#include <amlogic/aml_rollback.h>
|
|
#endif
|
|
|
|
#define FASTBOOT_INTERFACE_CLASS 0xff
|
|
#define FASTBOOT_INTERFACE_SUB_CLASS 0x42
|
|
#define FASTBOOT_INTERFACE_PROTOCOL 0x03
|
|
|
|
#define RX_ENDPOINT_MAXIMUM_PACKET_SIZE_2_0 (0x0200)
|
|
#define RX_ENDPOINT_MAXIMUM_PACKET_SIZE_1_1 (0x0040)
|
|
#define TX_ENDPOINT_MAXIMUM_PACKET_SIZE (0x0040)
|
|
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
#define DEVICE_SERIAL "1234567890"
|
|
#define DEVICE_NAME "USB fastboot gadget"
|
|
#endif
|
|
|
|
#define EP_BUFFER_SIZE 4096
|
|
/*
|
|
* EP_BUFFER_SIZE must always be an integral multiple of maxpacket size
|
|
* (64 or 512 or 1024), else we break on certain controllers like DWC3
|
|
* that expect bulk OUT requests to be divisible by maxpacket size.
|
|
*/
|
|
|
|
struct f_fastboot {
|
|
struct usb_function usb_function;
|
|
|
|
/* IN/OUT EP's and corresponding requests */
|
|
struct usb_ep *in_ep, *out_ep;
|
|
struct usb_request *in_req, *out_req;
|
|
};
|
|
|
|
static char fb_ext_prop_name[] = "DeviceInterfaceGUID";
|
|
static char fb_ext_prop_data[] = "{4866319A-F4D6-4374-93B9-DC2DEB361BA9}";
|
|
|
|
static struct usb_os_desc_ext_prop fb_ext_prop = {
|
|
.type = 1, /* NUL-terminated Unicode String (REG_SZ) */
|
|
.name = fb_ext_prop_name,
|
|
.data = fb_ext_prop_data,
|
|
};
|
|
|
|
/* 16 bytes of "Compatible ID" and "Subcompatible ID" */
|
|
static char fb_cid[16] = {'W', 'I', 'N', 'U', 'S', 'B'};
|
|
static struct usb_os_desc fb_os_desc = {
|
|
.ext_compat_id = fb_cid,
|
|
};
|
|
|
|
static struct usb_os_desc_table fb_os_desc_table = {
|
|
.os_desc = &fb_os_desc,
|
|
};
|
|
|
|
static inline struct f_fastboot *func_to_fastboot(struct usb_function *f)
|
|
{
|
|
return container_of(f, struct f_fastboot, usb_function);
|
|
}
|
|
|
|
static struct f_fastboot *fastboot_func;
|
|
|
|
static struct usb_endpoint_descriptor fs_ep_in = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = USB_DIR_IN,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.wMaxPacketSize = cpu_to_le16(64),
|
|
};
|
|
|
|
static struct usb_endpoint_descriptor fs_ep_out = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = USB_DIR_OUT,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.wMaxPacketSize = cpu_to_le16(64),
|
|
};
|
|
|
|
static struct usb_endpoint_descriptor hs_ep_in = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = USB_DIR_IN,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.wMaxPacketSize = cpu_to_le16(512),
|
|
};
|
|
|
|
static struct usb_endpoint_descriptor hs_ep_out = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = USB_DIR_OUT,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.wMaxPacketSize = cpu_to_le16(512),
|
|
};
|
|
|
|
static struct usb_interface_descriptor interface_desc = {
|
|
.bLength = USB_DT_INTERFACE_SIZE,
|
|
.bDescriptorType = USB_DT_INTERFACE,
|
|
.bInterfaceNumber = 0x00,
|
|
.bAlternateSetting = 0x00,
|
|
.bNumEndpoints = 0x02,
|
|
.bInterfaceClass = FASTBOOT_INTERFACE_CLASS,
|
|
.bInterfaceSubClass = FASTBOOT_INTERFACE_SUB_CLASS,
|
|
.bInterfaceProtocol = FASTBOOT_INTERFACE_PROTOCOL,
|
|
};
|
|
|
|
static struct usb_descriptor_header *fb_fs_function[] = {
|
|
(struct usb_descriptor_header *)&interface_desc,
|
|
(struct usb_descriptor_header *)&fs_ep_in,
|
|
(struct usb_descriptor_header *)&fs_ep_out,
|
|
NULL,
|
|
};
|
|
|
|
static struct usb_descriptor_header *fb_hs_function[] = {
|
|
(struct usb_descriptor_header *)&interface_desc,
|
|
(struct usb_descriptor_header *)&hs_ep_in,
|
|
(struct usb_descriptor_header *)&hs_ep_out,
|
|
NULL,
|
|
};
|
|
|
|
/* Super speed */
|
|
static struct usb_endpoint_descriptor ss_ep_in = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = USB_DIR_IN,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.wMaxPacketSize = cpu_to_le16(1024),
|
|
};
|
|
|
|
static struct usb_endpoint_descriptor ss_ep_out = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = USB_DIR_OUT,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.wMaxPacketSize = cpu_to_le16(1024),
|
|
};
|
|
|
|
static struct usb_ss_ep_comp_descriptor fb_ss_bulk_comp_desc = {
|
|
.bLength = sizeof(fb_ss_bulk_comp_desc),
|
|
.bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
|
|
};
|
|
|
|
static struct usb_descriptor_header *fb_ss_function[] = {
|
|
(struct usb_descriptor_header *)&interface_desc,
|
|
(struct usb_descriptor_header *)&ss_ep_in,
|
|
(struct usb_descriptor_header *)&fb_ss_bulk_comp_desc,
|
|
(struct usb_descriptor_header *)&ss_ep_out,
|
|
(struct usb_descriptor_header *)&fb_ss_bulk_comp_desc,
|
|
NULL,
|
|
};
|
|
|
|
static struct usb_endpoint_descriptor *
|
|
fb_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
|
|
struct usb_endpoint_descriptor *hs,
|
|
struct usb_endpoint_descriptor *ss)
|
|
{
|
|
if (gadget_is_superspeed(g) && g->speed >= USB_SPEED_SUPER)
|
|
return ss;
|
|
|
|
if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
|
|
return hs;
|
|
return fs;
|
|
}
|
|
|
|
/*
|
|
* static strings, in UTF-8
|
|
*/
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
static const char fastboot_name[] = "fastboot";
|
|
#else
|
|
static const char fastboot_name[] = "Android Fastboot";
|
|
#endif
|
|
|
|
static struct usb_string fastboot_string_defs[] = {
|
|
[0].s = fastboot_name,
|
|
{ } /* end of list */
|
|
};
|
|
|
|
static struct usb_gadget_strings stringtab_fastboot = {
|
|
.language = 0x0409, /* en-us */
|
|
.strings = fastboot_string_defs,
|
|
};
|
|
|
|
static struct usb_gadget_strings *fastboot_strings[] = {
|
|
&stringtab_fastboot,
|
|
NULL,
|
|
};
|
|
|
|
static void rx_handler_command(struct usb_ep *ep, struct usb_request *req);
|
|
|
|
static void fastboot_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
int status = req->status;
|
|
|
|
if (!status)
|
|
return;
|
|
printf("status: %d ep '%s' trans: %d\n", status, ep->name, req->actual);
|
|
}
|
|
|
|
static int fastboot_bind(struct usb_configuration *c, struct usb_function *f)
|
|
{
|
|
int id;
|
|
struct usb_gadget *gadget = c->cdev->gadget;
|
|
struct f_fastboot *f_fb = func_to_fastboot(f);
|
|
const char *s;
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
const char *board_name;
|
|
#endif
|
|
|
|
/* DYNAMIC interface numbers assignments */
|
|
id = usb_interface_id(c, f);
|
|
if (id < 0)
|
|
return id;
|
|
interface_desc.bInterfaceNumber = id;
|
|
|
|
/* Enable OS and Extended Properties Feature Descriptor */
|
|
c->cdev->use_os_string = 1;
|
|
f->os_desc_table = &fb_os_desc_table;
|
|
f->os_desc_n = 1;
|
|
f->os_desc_table->if_id = id;
|
|
INIT_LIST_HEAD(&fb_os_desc.ext_prop);
|
|
fb_ext_prop.name_len = strlen(fb_ext_prop.name) * 2 + 2;
|
|
fb_os_desc.ext_prop_len = 10 + fb_ext_prop.name_len;
|
|
fb_os_desc.ext_prop_count = 1;
|
|
fb_ext_prop.data_len = strlen(fb_ext_prop.data) * 2 + 2;
|
|
fb_os_desc.ext_prop_len += fb_ext_prop.data_len + 4;
|
|
list_add_tail(&fb_ext_prop.entry, &fb_os_desc.ext_prop);
|
|
|
|
id = usb_string_id(c->cdev);
|
|
if (id < 0)
|
|
return id;
|
|
fastboot_string_defs[0].id = id;
|
|
interface_desc.iInterface = id;
|
|
|
|
f_fb->in_ep = usb_ep_autoconfig(gadget, &fs_ep_in);
|
|
if (!f_fb->in_ep)
|
|
return -ENODEV;
|
|
f_fb->in_ep->driver_data = c->cdev;
|
|
|
|
f_fb->out_ep = usb_ep_autoconfig(gadget, &fs_ep_out);
|
|
if (!f_fb->out_ep)
|
|
return -ENODEV;
|
|
f_fb->out_ep->driver_data = c->cdev;
|
|
|
|
f->descriptors = fb_fs_function;
|
|
|
|
if (gadget_is_dualspeed(gadget)) {
|
|
/* Assume endpoint addresses are the same for both speeds */
|
|
hs_ep_in.bEndpointAddress = fs_ep_in.bEndpointAddress;
|
|
hs_ep_out.bEndpointAddress = fs_ep_out.bEndpointAddress;
|
|
/* copy HS descriptors */
|
|
f->hs_descriptors = fb_hs_function;
|
|
}
|
|
|
|
if (gadget_is_superspeed(gadget)) {
|
|
ss_ep_in.bEndpointAddress = fs_ep_in.bEndpointAddress;
|
|
ss_ep_out.bEndpointAddress = fs_ep_out.bEndpointAddress;
|
|
f->ss_descriptors = fb_ss_function;
|
|
}
|
|
|
|
s = env_get("serial#");
|
|
if (s)
|
|
g_dnl_set_serialnumber((char *)s);
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
else
|
|
g_dnl_set_serialnumber(DEVICE_SERIAL);
|
|
|
|
board_name = env_get("board");
|
|
if (board_name)
|
|
g_dnl_set_product((char *)board_name);
|
|
else
|
|
g_dnl_set_product(DEVICE_NAME);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fastboot_unbind(struct usb_configuration *c, struct usb_function *f)
|
|
{
|
|
f->os_desc_table = NULL;
|
|
list_del(&fb_os_desc.ext_prop);
|
|
memset(fastboot_func, 0, sizeof(*fastboot_func));
|
|
}
|
|
|
|
static void fastboot_disable(struct usb_function *f)
|
|
{
|
|
struct f_fastboot *f_fb = func_to_fastboot(f);
|
|
|
|
usb_ep_disable(f_fb->out_ep);
|
|
usb_ep_disable(f_fb->in_ep);
|
|
|
|
if (f_fb->out_req) {
|
|
free(f_fb->out_req->buf);
|
|
usb_ep_free_request(f_fb->out_ep, f_fb->out_req);
|
|
f_fb->out_req = NULL;
|
|
}
|
|
if (f_fb->in_req) {
|
|
free(f_fb->in_req->buf);
|
|
usb_ep_free_request(f_fb->in_ep, f_fb->in_req);
|
|
f_fb->in_req = NULL;
|
|
}
|
|
}
|
|
|
|
static struct usb_request *fastboot_start_ep(struct usb_ep *ep)
|
|
{
|
|
struct usb_request *req;
|
|
|
|
req = usb_ep_alloc_request(ep, 0);
|
|
if (!req)
|
|
return NULL;
|
|
|
|
req->length = EP_BUFFER_SIZE;
|
|
req->buf = memalign(CONFIG_SYS_CACHELINE_SIZE, EP_BUFFER_SIZE);
|
|
if (!req->buf) {
|
|
usb_ep_free_request(ep, req);
|
|
return NULL;
|
|
}
|
|
|
|
memset(req->buf, 0, req->length);
|
|
return req;
|
|
}
|
|
|
|
static int fastboot_set_alt(struct usb_function *f,
|
|
unsigned interface, unsigned alt)
|
|
{
|
|
int ret;
|
|
struct usb_composite_dev *cdev = f->config->cdev;
|
|
struct usb_gadget *gadget = cdev->gadget;
|
|
struct f_fastboot *f_fb = func_to_fastboot(f);
|
|
const struct usb_endpoint_descriptor *d;
|
|
|
|
debug("%s: func: %s intf: %d alt: %d\n",
|
|
__func__, f->name, interface, alt);
|
|
|
|
d = fb_ep_desc(gadget, &fs_ep_out, &hs_ep_out, &ss_ep_out);
|
|
ret = usb_ep_enable(f_fb->out_ep, d);
|
|
if (ret) {
|
|
puts("failed to enable out ep\n");
|
|
return ret;
|
|
}
|
|
|
|
f_fb->out_req = fastboot_start_ep(f_fb->out_ep);
|
|
if (!f_fb->out_req) {
|
|
puts("failed to alloc out req\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
f_fb->out_req->complete = rx_handler_command;
|
|
|
|
d = fb_ep_desc(gadget, &fs_ep_in, &hs_ep_in, &ss_ep_in);
|
|
ret = usb_ep_enable(f_fb->in_ep, d);
|
|
if (ret) {
|
|
puts("failed to enable in ep\n");
|
|
goto err;
|
|
}
|
|
|
|
f_fb->in_req = fastboot_start_ep(f_fb->in_ep);
|
|
if (!f_fb->in_req) {
|
|
puts("failed alloc req in\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
f_fb->in_req->complete = fastboot_complete;
|
|
|
|
ret = usb_ep_queue(f_fb->out_ep, f_fb->out_req, 0);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
fastboot_disable(f);
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_AMLOGIC_USB
|
|
static int fastboot_setup(struct usb_function *f,
|
|
const struct usb_ctrlrequest *ctrl)
|
|
{
|
|
int value = -EOPNOTSUPP;
|
|
struct f_fastboot *f_fb = func_to_fastboot(f);
|
|
|
|
/* composite driver infrastructure handles everything; interface
|
|
* activation uses set_alt().
|
|
*/
|
|
if (((ctrl->bRequestType & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) &&
|
|
ctrl->bRequest == USB_REQ_CLEAR_FEATURE &&
|
|
ctrl->wValue == USB_ENDPOINT_HALT) {
|
|
switch (ctrl->wIndex & 0xfe) {
|
|
case USB_DIR_OUT:
|
|
value = ctrl->wLength;
|
|
usb_ep_clear_halt(f_fb->out_ep);
|
|
break;
|
|
|
|
case USB_DIR_IN:
|
|
value = ctrl->wLength;
|
|
usb_ep_clear_halt(f_fb->in_ep);
|
|
break;
|
|
default:
|
|
printf("unknown usb_ctrlrequest\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
return value;
|
|
}
|
|
#endif
|
|
|
|
static int fastboot_add(struct usb_configuration *c)
|
|
{
|
|
struct f_fastboot *f_fb = fastboot_func;
|
|
int status;
|
|
|
|
debug("%s: cdev: 0x%p\n", __func__, c->cdev);
|
|
|
|
if (!f_fb) {
|
|
f_fb = memalign(CONFIG_SYS_CACHELINE_SIZE, sizeof(*f_fb));
|
|
if (!f_fb)
|
|
return -ENOMEM;
|
|
|
|
fastboot_func = f_fb;
|
|
memset(f_fb, 0, sizeof(*f_fb));
|
|
}
|
|
|
|
f_fb->usb_function.name = "f_fastboot";
|
|
f_fb->usb_function.bind = fastboot_bind;
|
|
f_fb->usb_function.unbind = fastboot_unbind;
|
|
f_fb->usb_function.set_alt = fastboot_set_alt;
|
|
f_fb->usb_function.disable = fastboot_disable;
|
|
f_fb->usb_function.strings = fastboot_strings;
|
|
if (IS_ENABLED(CONFIG_AMLOGIC_USB))
|
|
f_fb->usb_function.setup = fastboot_setup;
|
|
|
|
status = usb_add_function(c, &f_fb->usb_function);
|
|
if (status) {
|
|
free(f_fb);
|
|
fastboot_func = NULL;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
DECLARE_GADGET_BIND_CALLBACK(usb_dnl_fastboot, fastboot_add);
|
|
|
|
static int fastboot_tx_write(const char *buffer, unsigned int buffer_size)
|
|
{
|
|
struct usb_request *in_req = fastboot_func->in_req;
|
|
int ret;
|
|
|
|
memcpy(in_req->buf, buffer, buffer_size);
|
|
in_req->length = buffer_size;
|
|
|
|
usb_ep_dequeue(fastboot_func->in_ep, in_req);
|
|
|
|
ret = usb_ep_queue(fastboot_func->in_ep, in_req, 0);
|
|
if (ret)
|
|
printf("Error %d on queue\n", ret);
|
|
return 0;
|
|
}
|
|
|
|
static int fastboot_tx_write_str(const char *buffer)
|
|
{
|
|
return fastboot_tx_write(buffer, strlen(buffer));
|
|
}
|
|
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
void check_fastboot_step(void)
|
|
{
|
|
char *fastboot_step = env_get("fastboot_step");
|
|
char *gpt_mode = env_get("gpt_mode");
|
|
char *nocs_mode = env_get("nocs_mode");
|
|
|
|
if (fastboot_step && (strcmp(fastboot_step, "2") == 0)) {
|
|
//come to here, means new burn bootloader.img is OK, reset env
|
|
printf("new burn bootloader.img is OK, write other bootloader\n");
|
|
|
|
if ((gpt_mode && !strcmp(gpt_mode, "true")) ||
|
|
(nocs_mode && !strcmp(nocs_mode, "true"))) {
|
|
printf("gpt or disable user bootloader mode\n");
|
|
run_command("copy_slot_bootable 2 1", 0);
|
|
} else {
|
|
printf("normal mode\n");
|
|
run_command("copy_slot_bootable 1 0", 0);
|
|
run_command("copy_slot_bootable 1 2", 0);
|
|
}
|
|
|
|
env_set("fastboot_step", "0");
|
|
#if CONFIG_IS_ENABLED(AML_UPDATE_ENV)
|
|
run_command("update_env_part -p fastboot_step;", 0);
|
|
#else
|
|
run_command("defenv_reserve;setenv fastboot_step 0;saveenv;", 0);
|
|
#endif
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
check_fastboot_step();
|
|
#endif
|
|
g_dnl_unregister();
|
|
do_reset(NULL, 0, 0, NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
static void compl_do_reboot_bootloader(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
check_fastboot_step();
|
|
#endif
|
|
g_dnl_unregister();
|
|
|
|
if (dynamic_partition)
|
|
run_command("reboot bootloader", 0);
|
|
else
|
|
run_command("reboot fastboot", 0);
|
|
}
|
|
|
|
static void compl_do_reboot_fastboot(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
check_fastboot_step();
|
|
#endif
|
|
g_dnl_unregister();
|
|
|
|
run_command("reboot fastboot", 0);
|
|
}
|
|
|
|
static void compl_do_reboot_recovery(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
check_fastboot_step();
|
|
#endif
|
|
g_dnl_unregister();
|
|
|
|
run_command("reboot recovery", 0);
|
|
}
|
|
#endif
|
|
|
|
static unsigned int rx_bytes_expected(struct usb_ep *ep)
|
|
{
|
|
int rx_remain = fastboot_data_remaining();
|
|
unsigned int rem;
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
unsigned int maxpacket = ep->maxpacket;
|
|
#else
|
|
unsigned int maxpacket = usb_endpoint_maxp(ep->desc);
|
|
#endif
|
|
|
|
if (rx_remain <= 0)
|
|
return 0;
|
|
else if (rx_remain > EP_BUFFER_SIZE)
|
|
return EP_BUFFER_SIZE;
|
|
|
|
/*
|
|
* Some controllers e.g. DWC3 don't like OUT transfers to be
|
|
* not ending in maxpacket boundary. So just make them happy by
|
|
* always requesting for integral multiple of maxpackets.
|
|
* This shouldn't bother controllers that don't care about it.
|
|
*/
|
|
rem = rx_remain % maxpacket;
|
|
if (rem > 0)
|
|
rx_remain = rx_remain + (maxpacket - rem);
|
|
|
|
return rx_remain;
|
|
}
|
|
|
|
static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
char response[FASTBOOT_RESPONSE_LEN] = {0};
|
|
unsigned int transfer_size = fastboot_data_remaining();
|
|
const unsigned char *buffer = req->buf;
|
|
unsigned int buffer_size = req->actual;
|
|
|
|
if (req->status != 0) {
|
|
printf("Bad status: %d\n", req->status);
|
|
return;
|
|
}
|
|
|
|
if (buffer_size < transfer_size)
|
|
transfer_size = buffer_size;
|
|
|
|
fastboot_data_download(buffer, transfer_size, response);
|
|
if (response[0]) {
|
|
fastboot_tx_write_str(response);
|
|
} else if (!fastboot_data_remaining()) {
|
|
fastboot_data_complete(response);
|
|
|
|
/*
|
|
* Reset global transfer variable
|
|
*/
|
|
req->complete = rx_handler_command;
|
|
req->length = EP_BUFFER_SIZE;
|
|
|
|
fastboot_tx_write_str(response);
|
|
} else {
|
|
req->length = rx_bytes_expected(ep);
|
|
}
|
|
|
|
req->actual = 0;
|
|
usb_ep_queue(ep, req, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
static void tx_handler_mread(struct usb_ep *inep, struct usb_request *inreq)
|
|
{
|
|
const unsigned int transfer_size = inreq->actual;
|
|
|
|
if (inreq->status != 0) {
|
|
printf("in req Bad status: %d\n", inreq->status);
|
|
return;
|
|
}
|
|
|
|
if (fastboot_func->in_req != inreq) {
|
|
printf("exception, bogus req\n");
|
|
return;
|
|
}
|
|
|
|
fastboot_readInfo.transferredBytes += transfer_size;
|
|
|
|
/* Check if transfer is done */
|
|
if (fastboot_readInfo.transferredBytes >= fastboot_readInfo.totalBytes) {
|
|
printf("mread 0x%x bytes end\n", fastboot_readInfo.transferredBytes);
|
|
/*write ended and return to receive command*/
|
|
inreq->complete = fastboot_complete;
|
|
inreq->length = EP_BUFFER_SIZE;
|
|
if (fastboot_readInfo.priv)
|
|
inreq->buf = (char *)fastboot_readInfo.priv;
|
|
//should return to rx next command
|
|
fastboot_tx_write_str("OKAY");
|
|
} else {
|
|
const unsigned int leftLen = fastboot_readInfo.totalBytes
|
|
- fastboot_readInfo.transferredBytes;
|
|
|
|
if (leftLen > EP_BUFFER_SIZE)
|
|
inreq->length = EP_BUFFER_SIZE;
|
|
else
|
|
inreq->length = leftLen;
|
|
inreq->buf += transfer_size;//remove copy
|
|
|
|
inreq->actual = 0;
|
|
usb_ep_queue(inep, inreq, 0);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void do_exit_on_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
g_dnl_trigger_detach();
|
|
}
|
|
|
|
static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
fastboot_boot();
|
|
do_exit_on_complete(ep, req);
|
|
}
|
|
|
|
static int multiresponse_cmd = -1;
|
|
static void multiresponse_on_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
char response[FASTBOOT_RESPONSE_LEN] = {0};
|
|
|
|
if (multiresponse_cmd == -1)
|
|
return;
|
|
|
|
/* Call handler to obtain next response */
|
|
fastboot_multiresponse(multiresponse_cmd, response);
|
|
fastboot_tx_write_str(response);
|
|
|
|
/* If response is final OKAY/FAIL response disconnect this handler and unset cmd */
|
|
if (!strncmp("OKAY", response, 4) || !strncmp("FAIL", response, 4)) {
|
|
multiresponse_cmd = -1;
|
|
fastboot_func->in_req->complete = fastboot_complete;
|
|
}
|
|
}
|
|
|
|
static void do_acmd_complete(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
/* When usb dequeue complete will be called
|
|
* Need status value before call run_command.
|
|
* otherwise, host can't get last message.
|
|
*/
|
|
if (req->status == 0)
|
|
fastboot_acmd_complete();
|
|
}
|
|
|
|
static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
|
|
{
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
char cmdbuf[256];
|
|
#else
|
|
char *cmdbuf = req->buf;
|
|
#endif
|
|
char response[FASTBOOT_RESPONSE_LEN] = {0};
|
|
int cmd = -1;
|
|
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
strncpy(cmdbuf, req->buf, 255);
|
|
#endif
|
|
|
|
if (req->status != 0 || req->length == 0)
|
|
return;
|
|
|
|
if (req->actual < req->length) {
|
|
cmdbuf[req->actual] = '\0';
|
|
cmd = fastboot_handle_command(cmdbuf, response);
|
|
} else {
|
|
pr_err("buffer overflow\n");
|
|
fastboot_fail("buffer overflow", response);
|
|
}
|
|
|
|
if (!strncmp(FASTBOOT_MULTIRESPONSE_START, response, 4)) {
|
|
multiresponse_cmd = cmd;
|
|
fastboot_multiresponse(multiresponse_cmd, response);
|
|
|
|
/* Only add complete callback if first is not a final OKAY/FAIL response */
|
|
if (strncmp("OKAY", response, 4) && strncmp("FAIL", response, 4)) {
|
|
fastboot_func->in_req->complete = multiresponse_on_complete;
|
|
}
|
|
}
|
|
|
|
if (!strncmp("DATA", response, 4)) {
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
if (cmd == 11) {
|
|
printf("come to fetch code\n");
|
|
struct usb_ep *inep = fastboot_func->in_ep;
|
|
struct usb_request *inreq = fastboot_func->in_req;
|
|
int ret;
|
|
const unsigned int leftLen = fastboot_readInfo.totalBytes
|
|
- fastboot_readInfo.transferredBytes;
|
|
|
|
if (!fastboot_readInfo.priv)
|
|
fastboot_readInfo.priv = inreq->buf;
|
|
|
|
inreq->buf = (void *)CONFIG_FASTBOOT_BUF_ADDR;//to remove copy
|
|
inreq->complete = tx_handler_mread;
|
|
if (leftLen > EP_BUFFER_SIZE)
|
|
inreq->length = EP_BUFFER_SIZE;
|
|
else
|
|
inreq->length = leftLen;
|
|
|
|
ret = usb_ep_queue(inep, inreq, 0);
|
|
if (ret)
|
|
printf("Error %d on queue\n", ret);
|
|
} else {
|
|
#endif
|
|
req->complete = rx_handler_dl_image;
|
|
req->length = rx_bytes_expected(ep);
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
fastboot_tx_write_str(response);
|
|
#endif
|
|
|
|
if (!strncmp("OKAY", response, 4)) {
|
|
switch (cmd) {
|
|
case FASTBOOT_COMMAND_BOOT:
|
|
fastboot_func->in_req->complete = do_bootm_on_complete;
|
|
break;
|
|
|
|
case FASTBOOT_COMMAND_CONTINUE:
|
|
fastboot_func->in_req->complete = do_exit_on_complete;
|
|
break;
|
|
|
|
#ifdef CONFIG_AMLOGIC_MODIFY
|
|
case FASTBOOT_COMMAND_REBOOT:
|
|
fastboot_func->in_req->complete = compl_do_reset;
|
|
break;
|
|
case FASTBOOT_COMMAND_REBOOT_BOOTLOADER:
|
|
fastboot_func->in_req->complete = compl_do_reboot_bootloader;
|
|
break;
|
|
case FASTBOOT_COMMAND_REBOOT_FASTBOOTD:
|
|
fastboot_func->in_req->complete = compl_do_reboot_fastboot;
|
|
break;
|
|
case FASTBOOT_COMMAND_REBOOT_RECOVERY:
|
|
fastboot_func->in_req->complete = compl_do_reboot_recovery;
|
|
break;
|
|
#else
|
|
case FASTBOOT_COMMAND_REBOOT:
|
|
case FASTBOOT_COMMAND_REBOOT_BOOTLOADER:
|
|
case FASTBOOT_COMMAND_REBOOT_FASTBOOTD:
|
|
case FASTBOOT_COMMAND_REBOOT_RECOVERY:
|
|
fastboot_func->in_req->complete = compl_do_reset;
|
|
break;
|
|
#endif
|
|
case FASTBOOT_COMMAND_ACMD:
|
|
if (CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT))
|
|
fastboot_func->in_req->complete = do_acmd_complete;
|
|
break;
|
|
}
|
|
}
|
|
|
|
//fastboot_tx_write_str(response);
|
|
*cmdbuf = '\0';
|
|
req->actual = 0;
|
|
usb_ep_queue(ep, req, 0);
|
|
}
|