1456 lines
40 KiB
C
1456 lines
40 KiB
C
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2019 Amlogic, Inc. All rights reserved.
|
|
*/
|
|
|
|
//#include <common.h>
|
|
#include <command.h>
|
|
#include <env.h>
|
|
#include <malloc.h>
|
|
#include <asm/byteorder.h>
|
|
#include <amlogic/media/vout/hdmitx/hdmitx.h>
|
|
#include <amlogic/media/dv/dolby_vision.h>
|
|
#include <linux/libfdt_env.h>
|
|
#include <amlogic/media/vout/aml_vinfo.h>
|
|
#include "../../drivers/amlogic/media/vout/hdmitx/hdmitx_common/hdmitx_policy_setting.h"
|
|
#ifdef CONFIG_AML_VOUT
|
|
#include <amlogic/media/vout/aml_vout.h>
|
|
#endif
|
|
|
|
static unsigned char edid_raw_buf[256] = {0};
|
|
static void dump_edid_raw_8bytes(unsigned char *buf)
|
|
{
|
|
int i = 0;
|
|
for (i = 0; i < 8; i++)
|
|
printf("%02x ", buf[i]);
|
|
printf("\n");
|
|
}
|
|
|
|
static void dump_full_edid(const unsigned char *buf)
|
|
{
|
|
int i;
|
|
int blk_no;
|
|
|
|
if (!buf)
|
|
return;
|
|
blk_no = buf[126] + 1;
|
|
if (blk_no > 4)
|
|
blk_no = 4;
|
|
|
|
if (blk_no == 2)
|
|
if (buf[128 + 4] == 0xe2 && buf[128 + 5] == 0x78)
|
|
blk_no = buf[128 + 6] + 1;
|
|
if (blk_no > EDID_BLK_NO)
|
|
blk_no = EDID_BLK_NO;
|
|
|
|
printf("dump EDID rawdata\n");
|
|
printf(" ");
|
|
for (i = 0; i < blk_no * EDID_BLK_SIZE; i++)
|
|
printk("%02x", buf[i]);
|
|
printf("\n");
|
|
}
|
|
|
|
static int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
|
|
{
|
|
unsigned int tmp_addr = 0;
|
|
unsigned char edid_addr = 0;
|
|
unsigned char st = 0;
|
|
struct hdmitx_dev *hdev = hdmitx_get_hdev();
|
|
|
|
if (!hdev) {
|
|
printf("null hdmitx dev\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
memset(edid_raw_buf, 0, ARRAY_SIZE(edid_raw_buf));
|
|
if (argc < 2)
|
|
return cmd_usage(cmdtp);
|
|
if (strcmp(argv[1], "read") == 0) {
|
|
tmp_addr = simple_strtoul(argv[2], NULL, 16);
|
|
if (tmp_addr > 0xff)
|
|
return cmd_usage(cmdtp);
|
|
edid_addr = tmp_addr;
|
|
/* read edid raw data */
|
|
/* current only support read 1 byte edid data */
|
|
st = hdev->hwop.read_edid(
|
|
&edid_raw_buf[edid_addr & 0xf8], edid_addr & 0xf8, 8);
|
|
printf("edid[0x%02x]: 0x%02x\n", edid_addr,
|
|
edid_raw_buf[edid_addr]);
|
|
if (0) /* Debug only */
|
|
dump_edid_raw_8bytes(&edid_raw_buf[edid_addr & 0xf8]);
|
|
if (!st)
|
|
printf("edid read failed\n");
|
|
}
|
|
return st;
|
|
}
|
|
|
|
static int do_rx_det(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
unsigned char edid_addr = 0xf8; // Fixed Address
|
|
unsigned char st = 0;
|
|
struct hdmitx_dev *hdev = hdmitx_get_hdev();
|
|
|
|
if (!hdev) {
|
|
printf("null hdmitx dev\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
memset(edid_raw_buf, 0, ARRAY_SIZE(edid_raw_buf));
|
|
|
|
// read edid raw data
|
|
// current only support read 1 byte edid data
|
|
st = hdev->hwop.read_edid(&edid_raw_buf[edid_addr & 0xf8], edid_addr & 0xf8, 8);
|
|
if (1) // Debug only
|
|
dump_edid_raw_8bytes(&edid_raw_buf[edid_addr & 0xf8]);
|
|
if (st) {
|
|
#if 0
|
|
// set fake value for debug
|
|
edid_raw_buf[250] = 0xfb;
|
|
edid_raw_buf[251] = 0x0c;
|
|
edid_raw_buf[252] = 0x01;
|
|
#endif
|
|
if ((edid_raw_buf[250] == 0xfb) & (edid_raw_buf[251] == 0x0c)) {
|
|
printf("RX is FBC\n");
|
|
|
|
// set outputmode ENV
|
|
switch (edid_raw_buf[252] & 0x0f) {
|
|
case 0x0:
|
|
run_command("setenv outputmode 1080p50hz", 0);
|
|
break;
|
|
case 0x1:
|
|
run_command("setenv outputmode 2160p50hz420", 0);
|
|
break;
|
|
case 0x2:
|
|
run_command("setenv outputmode 1080p50hz44410bit", 0);
|
|
break;
|
|
case 0x3:
|
|
run_command("setenv outputmode 2160p50hz42010bit", 0);
|
|
break;
|
|
case 0x4:
|
|
run_command("setenv outputmode 2160p50hz42210bit", 0);
|
|
break;
|
|
case 0x5:
|
|
run_command("setenv outputmode 2160p50hz", 0);
|
|
break;
|
|
default:
|
|
run_command("setenv outputmode 1080p50hz", 0);
|
|
break;
|
|
}
|
|
|
|
/*et RX 3D Info*/
|
|
switch ((edid_raw_buf[252] >> 4) & 0x0f) {
|
|
case 0x00:
|
|
run_command("setenv rx_3d_info 0", 0);
|
|
break;
|
|
case 0x01:
|
|
run_command("setenv rx_3d_info 1", 0);
|
|
break;
|
|
case 0x02:
|
|
run_command("setenv rx_3d_info 2", 0);
|
|
break;
|
|
case 0x03:
|
|
run_command("setenv rx_3d_info 3", 0);
|
|
break;
|
|
case 0x04:
|
|
run_command("setenv rx_3d_info 4", 0);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (edid_raw_buf[253]) {
|
|
case 0x1:
|
|
/*TODO*/
|
|
break;
|
|
case 0x2:
|
|
/*TODO*/
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
} else
|
|
printf("edid read failed\n");
|
|
|
|
return st;
|
|
}
|
|
|
|
static void save_default_720p(void)
|
|
{
|
|
env_set("outputmode", DEFAULT_HDMI_MODE);
|
|
env_set("colorattribute", DEFAULT_COLOR_FORMAT);
|
|
}
|
|
|
|
static void hdmitx_mask_rx_info(struct hdmitx_dev *hdev)
|
|
{
|
|
if (!hdev || !hdev->para)
|
|
return;
|
|
|
|
if (env_get("colorattribute"))
|
|
hdmi_parse_attr(hdev->para, env_get("colorattribute"));
|
|
|
|
/* when current output color depth is 8bit, mask hdr capability */
|
|
/* refer to SWPL-44445 for more detail */
|
|
if (hdev->para->cd == HDMI_COLOR_DEPTH_24B)
|
|
memset(&hdev->RXCap.hdr_info, 0, sizeof(struct hdr_info));
|
|
}
|
|
|
|
static void hdmitx_config_csc_en(struct hdmitx_dev *hdev)
|
|
{
|
|
if (!hdev)
|
|
return;
|
|
|
|
if (env_get("config_csc_en")) {
|
|
if (strncmp("0", env_get("config_csc_en"), 1) == 0)
|
|
hdev->config_csc_en = 0;
|
|
else
|
|
hdev->config_csc_en = 1;
|
|
printf("config_csc_en:%d\n", hdev->config_csc_en);
|
|
} else {
|
|
hdev->config_csc_en = 0;
|
|
}
|
|
}
|
|
|
|
static int _do_output(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
|
|
{
|
|
struct hdmitx_dev *hdev = hdmitx_get_hdev();
|
|
int ret;
|
|
|
|
if (argc < 1)
|
|
return cmd_usage(cmdtp);
|
|
if (!hdev) {
|
|
printf("null hdmitx dev\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
if (strcmp(argv[1], "list") == 0)
|
|
hdev->hwop.list_support_modes();
|
|
else if (strcmp(argv[1], "bist") == 0) {
|
|
unsigned int mode = 0;
|
|
if (strcmp(argv[2], "off") == 0)
|
|
mode = 0;
|
|
else if (strcmp(argv[2], "line") == 0)
|
|
mode = 2;
|
|
else if (strcmp(argv[2], "dot") == 0)
|
|
mode = 3;
|
|
else
|
|
mode = simple_strtoul(argv[2], NULL, 10);
|
|
hdev->hwop.test_bist(mode);
|
|
} else if (strcmp(argv[1], "prbs") == 0) {
|
|
if (!hdev->para) {
|
|
printf("null hdmitx para\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
hdev->para->cs = HDMI_COLOR_FORMAT_RGB;
|
|
hdev->para->cd = HDMI_COLOR_DEPTH_24B;
|
|
hdev->vic = HDMI_1920x1080p60_16x9;
|
|
ret = hdmi_tx_set(hdev);
|
|
hdev->hwop.test_prbs();
|
|
if (ret != 0)
|
|
return CMD_RET_FAILURE;
|
|
} else if (strncmp(argv[1], "div40", 5) == 0) {
|
|
bool div40 = 0;
|
|
|
|
if (argv[1][5] == '1')
|
|
div40 = 1;
|
|
hdev->hwop.set_div40(div40);
|
|
} else { /* "output" */
|
|
if (!edid_parsing_ok(hdev)) {
|
|
/* in SWPL-34712: if EDID parsing error in kernel,
|
|
* only forcely output default mode(480p,RGB,8bit)
|
|
* in sysctl, not save the default mode to env.
|
|
* if uboot follow this rule, will cause issue OTT-19333:
|
|
* uboot read edid error and then output default mode,
|
|
* without save it mode env. if then kernel edid normal,
|
|
* sysctrl/kernel get mode from env, the actual output
|
|
* mode differs with outputmode env,it will
|
|
* cause display abnormal(such as stretch). so don't
|
|
* follow this rule in uboot, that's to say the actual
|
|
* output mode needs to stays with the outputmode env.
|
|
*/
|
|
printf("edid parsing ng, forcely output 720p, rgb,8bit\n");
|
|
save_default_720p();
|
|
hdev->vic = HDMI_1280x720p60_16x9;
|
|
hdev->para =
|
|
hdmi_get_fmt_paras(hdev->vic);
|
|
hdev->para->cs = HDMI_COLOR_FORMAT_RGB;
|
|
hdev->para->cd = HDMI_COLOR_DEPTH_24B;
|
|
hdmi_tx_set(hdev);
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
hdev->vic = hdmi_get_fmt_vic(argv[1]);
|
|
hdev->para = hdmi_get_fmt_paras(hdev->vic);
|
|
if (hdev->vic == HDMI_unknown) {
|
|
/* Not find VIC */
|
|
printf("Not find '%s' mapped VIC\n", argv[1]);
|
|
return CMD_RET_FAILURE;
|
|
} else {
|
|
printf("set hdmitx VIC = %d\n", hdev->vic);
|
|
}
|
|
if (!hdev->para) {
|
|
printf("null hdmitx para\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
if (env_get("colorattribute"))
|
|
hdmi_parse_attr(hdev->para, env_get("colorattribute"));
|
|
if (strstr(argv[1], "hz420") != NULL)
|
|
hdev->para->cs = HDMI_COLOR_FORMAT_420;
|
|
/* For RGB444 or YCbCr444 under 6Gbps mode, no deepcolor */
|
|
/* Only 4k50/60 has 420 modes */
|
|
switch (hdev->vic) {
|
|
case HDMI_3840x2160p50_16x9:
|
|
case HDMI_3840x2160p60_16x9:
|
|
case HDMI_4096x2160p50_256x135:
|
|
case HDMI_4096x2160p60_256x135:
|
|
case HDMI_3840x2160p50_64x27:
|
|
case HDMI_3840x2160p60_64x27:
|
|
case HDMI_3840x2160p50_16x9_Y420:
|
|
case HDMI_3840x2160p60_16x9_Y420:
|
|
case HDMI_4096x2160p50_256x135_Y420:
|
|
case HDMI_4096x2160p60_256x135_Y420:
|
|
case HDMI_3840x2160p50_64x27_Y420:
|
|
case HDMI_3840x2160p60_64x27_Y420:
|
|
if ((hdev->para->cs == HDMI_COLOR_FORMAT_RGB) ||
|
|
(hdev->para->cs == HDMI_COLOR_FORMAT_444)) {
|
|
if (hdev->para->cd != HDMI_COLOR_DEPTH_24B) {
|
|
printf("vic %d cs %d has no cd %d\n",
|
|
hdev->vic,
|
|
hdev->para->cs,
|
|
hdev->para->cd);
|
|
hdev->para->cd = HDMI_COLOR_DEPTH_24B;
|
|
printf("set cd as %d\n", HDMI_COLOR_DEPTH_24B);
|
|
}
|
|
}
|
|
if (hdev->para->cs == HDMI_COLOR_FORMAT_420)
|
|
hdev->vic |= HDMITX_VIC420_OFFSET;
|
|
break;
|
|
default:
|
|
if (hdev->para->cs == HDMI_COLOR_FORMAT_420) {
|
|
printf("vic %d has no cs %d\n", hdev->vic,
|
|
hdev->para->cs);
|
|
hdev->para->cs = HDMI_COLOR_FORMAT_444;
|
|
printf("set cs as %d\n", HDMI_COLOR_FORMAT_444);
|
|
}
|
|
/* For VESA modes, should be RGB format */
|
|
if (hdev->vic >= HDMITX_VESA_OFFSET) {
|
|
hdev->para->cs = HDMI_COLOR_FORMAT_RGB;
|
|
hdev->para->cd = HDMI_COLOR_DEPTH_24B;
|
|
}
|
|
break;
|
|
}
|
|
printf("set hdmitx VIC = %d CS = %d CD = %d\n",
|
|
hdev->vic, hdev->para->cs, hdev->para->cd);
|
|
hdmitx_config_csc_en(hdev);
|
|
ret = hdmi_tx_set(hdev);
|
|
if (ret != 0)
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int do_output(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
|
|
{
|
|
int ret;
|
|
|
|
ret = _do_output(cmdtp, flag, argc, argv);
|
|
hdmi_mode_frac_postprocess();
|
|
return ret;
|
|
}
|
|
|
|
static int do_blank(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
|
|
{
|
|
struct hdmitx_dev *hdev = hdmitx_get_hdev();
|
|
|
|
if (argc < 1)
|
|
return cmd_usage(cmdtp);
|
|
if (!hdev) {
|
|
printf("null hdmitx dev\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
if (strcmp(argv[1], "1") == 0)
|
|
hdev->hwop.output_blank(1);
|
|
if (strcmp(argv[1], "0") == 0)
|
|
hdev->hwop.output_blank(0);
|
|
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int do_off(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
struct hdmitx_dev *hdev = hdmitx_get_hdev();
|
|
|
|
if (!hdev) {
|
|
printf("null hdmitx dev\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
hdev->vic = HDMI_unknown;
|
|
hdev->hwop.turn_off();
|
|
printf("turn off hdmitx\n");
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int do_dump(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
struct hdmitx_dev *hdev = hdmitx_get_hdev();
|
|
|
|
if (!hdev) {
|
|
printf("null hdmitx dev\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
hdev->hwop.dump_regs();
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int do_reg(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
unsigned long addr = 0;
|
|
unsigned int data = 0;
|
|
|
|
if (argc < 1)
|
|
return cmd_usage(cmdtp);
|
|
|
|
if (strncmp(argv[1], "rh", 2) == 0) {
|
|
addr = strtoul(argv[1] + 2, NULL, 16);
|
|
data = hdmitx_rd_reg((unsigned int)addr);
|
|
printk("rd[0x%lx] 0x%x\n", addr, data);
|
|
}
|
|
|
|
if (strncmp(argv[1], "wh", 2) == 0) {
|
|
addr = strtoul(argv[1] + 2, NULL, 16);
|
|
data = strtoul(argv[2], NULL, 16);
|
|
hdmitx_wr_reg(addr, data);
|
|
printk("wr[0x%lx] 0x%x\n", addr, data);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static bool check_vic_exist(struct hdmitx_dev *hdev, enum hdmi_vic vic,
|
|
int count)
|
|
{
|
|
struct rx_cap *rxcap = NULL;
|
|
int i;
|
|
|
|
rxcap = &hdev->RXCap;
|
|
for (i = 0; i < count; i++)
|
|
if (vic == rxcap->VIC[i])
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void disp_cap_show(struct hdmitx_dev *hdev)
|
|
{
|
|
struct rx_cap *rxcap = NULL;
|
|
struct hdmi_format_para *para = NULL;
|
|
enum hdmi_vic vic;
|
|
int i;
|
|
|
|
if (!hdev)
|
|
return;
|
|
|
|
rxcap = &hdev->RXCap;
|
|
printf("disp_cap\n");
|
|
for (i = 0; i < rxcap->VIC_count && i < VIC_MAX_NUM; i++) {
|
|
vic = rxcap->VIC[i];
|
|
if (check_vic_exist(hdev, vic, i))
|
|
continue;
|
|
para = hdmi_get_fmt_paras(vic);
|
|
if (para && vic < HDMITX_VESA_OFFSET && !is_vic_over_limited_1080p(vic))
|
|
printf(" %s\n", para->sname ? para->sname : para->name);
|
|
}
|
|
}
|
|
|
|
static void vesa_cap_show(struct hdmitx_dev *hdev)
|
|
{
|
|
}
|
|
|
|
static void dc_cap_show(struct hdmitx_dev *hdev)
|
|
{
|
|
enum hdmi_vic vic = HDMI_unknown;
|
|
struct rx_cap *prxcap = &hdev->RXCap;
|
|
const struct dv_info *dv = &hdev->RXCap.dv_info;
|
|
|
|
printf("dc_cap\n");
|
|
if (prxcap->dc_36bit_420)
|
|
printf("420,12bit\n");
|
|
if (prxcap->dc_30bit_420) {
|
|
printf("420,10bit\n");
|
|
printf("420,8bit\n");
|
|
} else {
|
|
vic = hdmitx_edid_get_VIC(hdev, "2160p60hz420", 0);
|
|
if (vic != HDMI_unknown) {
|
|
printf("420,8bit\n");
|
|
goto next444;
|
|
}
|
|
vic = hdmitx_edid_get_VIC(hdev, "2160p50hz420", 0);
|
|
if (vic != HDMI_unknown) {
|
|
printf("420,8bit\n");
|
|
goto next444;
|
|
}
|
|
vic = hdmitx_edid_get_VIC(hdev, "smpte60hz420", 0);
|
|
if (vic != HDMI_unknown) {
|
|
printf("420,8bit\n");
|
|
goto next444;
|
|
}
|
|
vic = hdmitx_edid_get_VIC(hdev, "smpte50hz420", 0);
|
|
if (vic != HDMI_unknown) {
|
|
printf("420,8bit\n");
|
|
goto next444;
|
|
}
|
|
}
|
|
next444:
|
|
if (prxcap->native_Mode & (1 << 5)) {
|
|
if (prxcap->dc_y444) {
|
|
if (prxcap->dc_36bit || dv->sup_10b_12b_444 == 0x2)
|
|
printf("444,12bit\n");
|
|
if (prxcap->dc_30bit || dv->sup_10b_12b_444 == 0x1)
|
|
printf("444,10bit\n");
|
|
}
|
|
printf("444,8bit\n");
|
|
}
|
|
/* y422, not check dc */
|
|
if (prxcap->native_Mode & (1 << 4)) {
|
|
printf("422,12bit\n");
|
|
printf("422,10bit\n");
|
|
printf("422,8bit\n");
|
|
}
|
|
|
|
if (prxcap->dc_36bit || dv->sup_10b_12b_444 == 0x2)
|
|
printf("rgb,12bit\n");
|
|
if (prxcap->dc_30bit || dv->sup_10b_12b_444 == 0x1)
|
|
printf("rgb,10bit\n");
|
|
printf("rgb,8bit\n");
|
|
}
|
|
|
|
static void aud_cap_show(struct hdmitx_dev *hdev)
|
|
{
|
|
}
|
|
|
|
static void hdr_cap_show(struct hdmitx_dev *hdev)
|
|
{
|
|
int hdr10plugsupported = 0;
|
|
struct hdr_info *hdr = &hdev->RXCap.hdr_info;
|
|
const struct hdr10_plus_info *hdr10p = &hdev->RXCap.hdr10plus_info;
|
|
|
|
printf("\nhdr_cap\n");
|
|
if (hdr10p->ieeeoui == HDR10_PLUS_IEEE_OUI &&
|
|
hdr10p->application_version != 0xFF)
|
|
hdr10plugsupported = 1;
|
|
printf("HDR10Plus Supported: %d\n", hdr10plugsupported);
|
|
printf("HDR Static Metadata:\n");
|
|
printf(" Supported EOTF:\n");
|
|
printf(" Traditional SDR: %d\n", !!(hdr->hdr_support & HDR_SUP_EOTF_SDR));
|
|
printf(" Traditional HDR: %d\n", !!(hdr->hdr_support & HDR_SUP_EOTF_HDR));
|
|
printf(" SMPTE ST 2084: %d\n", !!(hdr->hdr_support & HDR_SUP_EOTF_SMPTE_ST_2084));
|
|
printf(" Hybrid Log-Gamma: %d\n", !!(hdr->hdr_support & HDR_SUP_EOTF_HLG));
|
|
printf(" Supported SMD type1: %d\n", hdr->static_metadata_type1);
|
|
printf(" Luminance Data\n");
|
|
printf(" Max: %d\n", hdr->lumi_max);
|
|
printf(" Avg: %d\n", hdr->lumi_avg);
|
|
printf(" Min: %d\n\n", hdr->lumi_min);
|
|
printf("HDR Dynamic Metadata:");
|
|
}
|
|
|
|
static void _dv_cap_show(const struct dv_info *dv)
|
|
{
|
|
int i;
|
|
|
|
if (dv->ieeeoui != DV_IEEE_OUI || dv->block_flag != CORRECT) {
|
|
printf("The Rx don't support DolbyVision\n");
|
|
return;
|
|
}
|
|
printf("DolbyVision RX support list:\n");
|
|
|
|
if (dv->ver == 0) {
|
|
printf("VSVDB Version: V%d\n", dv->ver);
|
|
printf("2160p%shz: 1\n", dv->sup_2160p60hz ? "60" : "30");
|
|
printf("Support mode:\n");
|
|
printf(" DV_RGB_444_8BIT\n");
|
|
if (dv->sup_yuv422_12bit)
|
|
printf(" DV_YCbCr_422_12BIT\n");
|
|
}
|
|
if (dv->ver == 1) {
|
|
printf("VSVDB Version: V%d(%d-byte)\n", dv->ver, dv->length + 1);
|
|
if (dv->length == 0xB) {
|
|
printf("2160p%shz: 1\n", dv->sup_2160p60hz ? "60" : "30");
|
|
printf("Support mode:\n");
|
|
printf(" DV_RGB_444_8BIT\n");
|
|
if (dv->sup_yuv422_12bit)
|
|
printf(" DV_YCbCr_422_12BIT\n");
|
|
if (dv->low_latency == 0x01)
|
|
printf(" LL_YCbCr_422_12BIT\n");
|
|
}
|
|
|
|
if (dv->length == 0xE) {
|
|
printf("2160p%shz: 1\n", dv->sup_2160p60hz ? "60" : "30");
|
|
printf("Support mode:\n");
|
|
printf(" DV_RGB_444_8BIT\n");
|
|
if (dv->sup_yuv422_12bit)
|
|
printf(" DV_YCbCr_422_12BIT\n");
|
|
}
|
|
}
|
|
if (dv->ver == 2) {
|
|
printf("VSVDB Version: V%d\n", dv->ver);
|
|
printf("2160p%shz: 1\n", dv->sup_2160p60hz ? "60" : "30");
|
|
printf("Support mode:\n");
|
|
if (dv->Interface != 0x00 && dv->Interface != 0x01) {
|
|
printf(" DV_RGB_444_8BIT\n");
|
|
if (dv->sup_yuv422_12bit)
|
|
printf(" DV_YCbCr_422_12BIT\n");
|
|
}
|
|
printf(" LL_YCbCr_422_12BIT\n");
|
|
if (dv->Interface == 0x01 || dv->Interface == 0x03) {
|
|
if (dv->sup_10b_12b_444 == 0x1)
|
|
printf(" LL_RGB_444_10BIT\n");
|
|
if (dv->sup_10b_12b_444 == 0x2)
|
|
printf(" LL_RGB_444_12BIT\n");
|
|
}
|
|
}
|
|
printf("IEEEOUI: 0x%06x\n", dv->ieeeoui);
|
|
printf("VSVDB: ");
|
|
for (i = 0; i < (dv->length + 1); i++)
|
|
printf("%02x", dv->rawdata[i]);
|
|
printf("\n");
|
|
}
|
|
|
|
static void dv_cap_show(struct hdmitx_dev *hdev)
|
|
{
|
|
const struct dv_info *dv = &hdev->RXCap.dv_info;
|
|
|
|
printf("dv_cap\n");
|
|
if (dv->ieeeoui != DV_IEEE_OUI) {
|
|
printf("The Rx don't support DolbyVision\n");
|
|
return;
|
|
}
|
|
_dv_cap_show(dv);
|
|
}
|
|
|
|
static void edid_cap_show(struct hdmitx_dev *hdev)
|
|
{
|
|
int i;
|
|
struct rx_cap *prxcap = &hdev->RXCap;
|
|
|
|
printf("EDID Version: %d.%d\n", prxcap->edid_version, prxcap->edid_revision);
|
|
|
|
printf("EDID block number: 0x%x\n", hdev->rawedid[0x7e]);
|
|
printf("blk0 chksum: 0x%02x\n", prxcap->chksum);
|
|
|
|
printf("native Mode %x, VIC (native %d):\n",
|
|
prxcap->native_Mode, prxcap->native_VIC);
|
|
|
|
printf("ColorDeepSupport %x\n", prxcap->ColorDeepSupport);
|
|
|
|
for (i = 0 ; i < prxcap->VIC_count ; i++)
|
|
printf("%d ", prxcap->VIC[i]);
|
|
printf("\n");
|
|
printf("Vendor: 0x%x ( %s device)\n",
|
|
prxcap->IEEEOUI, (prxcap->IEEEOUI) ? "HDMI" : "DVI");
|
|
|
|
printf("MaxTMDSClock1 %d MHz\n", prxcap->Max_TMDS_Clock1 * 5);
|
|
|
|
if (prxcap->HF_IEEEOUI) {
|
|
printf("Vendor2: 0x%x\n", prxcap->HF_IEEEOUI);
|
|
printf("MaxTMDSClock2 %d MHz\n", prxcap->Max_TMDS_Clock2 * 5);
|
|
}
|
|
|
|
printf("Video_Latency: ");
|
|
if (prxcap->Video_Latency == 0)
|
|
printf(" Invalid/Unknown\n");
|
|
else if (prxcap->Video_Latency == 0xffff)
|
|
printf(" UnSupported\n");
|
|
else
|
|
printf(" %d\n", prxcap->Video_Latency);
|
|
|
|
printf("Audio_Latency: ");
|
|
if (prxcap->Audio_Latency == 0)
|
|
printf(" Invalid/Unknown\n");
|
|
else if (prxcap->Audio_Latency == 0xffff)
|
|
printf(" UnSupported\n");
|
|
else
|
|
printf(" %d\n", prxcap->Audio_Latency);
|
|
|
|
printf("Interlaced_Video_Latency: ");
|
|
if (prxcap->Interlaced_Video_Latency == 0)
|
|
printf(" Invalid/Unknown\n");
|
|
else if (prxcap->Interlaced_Video_Latency == 0xffff)
|
|
printf(" UnSupported\n");
|
|
else
|
|
printf(" %d\n", prxcap->Interlaced_Video_Latency);
|
|
|
|
printf("Interlaced_Audio_Latency: ");
|
|
if (prxcap->Interlaced_Audio_Latency == 0)
|
|
printf(" Invalid/Unknown\n");
|
|
else if (prxcap->Interlaced_Audio_Latency == 0xffff)
|
|
printf(" UnSupported\n");
|
|
else
|
|
printf(" %d\n", prxcap->Interlaced_Audio_Latency);
|
|
|
|
if (prxcap->colorimetry_data)
|
|
printf("ColorMetry: 0x%x\n", prxcap->colorimetry_data);
|
|
printf("SCDC: %x\n", prxcap->scdc_present);
|
|
printf("RR_Cap: %x\n", prxcap->scdc_rr_capable);
|
|
printf("LTE_340M_Scramble: %x\n", prxcap->lte_340mcsc_scramble);
|
|
|
|
if (prxcap->dv_info.ieeeoui == DV_IEEE_OUI)
|
|
printf(" DolbyVision%d", prxcap->dv_info.ver);
|
|
if (prxcap->hdr_info.hdr_support & HDR_SUP_EOTF_SMPTE_ST_2084)
|
|
printf(" HDR/%d", !!(prxcap->hdr_info.hdr_support & HDR_SUP_EOTF_SMPTE_ST_2084));
|
|
if (prxcap->dc_y444 || prxcap->dc_30bit || prxcap->dc_30bit_420)
|
|
printf(" DeepColor");
|
|
printf("\n");
|
|
}
|
|
|
|
static int do_info(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
struct hdmitx_dev *hdev = hdmitx_get_hdev();
|
|
struct hdmi_format_para *para;
|
|
|
|
if (!hdev) {
|
|
printf("null hdmitx dev\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
if (!hdev->para) {
|
|
printf("null hdmitx para\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
para = hdev->para;
|
|
printf("current mode %s vic %d\n", para->ext_name, hdev->vic);
|
|
printf("cd%d cs%d cr%d\n", hdev->para->cd, hdev->para->cs, hdev->para->cr);
|
|
printf("frac_rate: %d\n", hdev->frac_rate_policy);
|
|
printf("Rx EDID info\n");
|
|
dump_full_edid(hdev->rawedid);
|
|
disp_cap_show(hdev);
|
|
vesa_cap_show(hdev);
|
|
aud_cap_show(hdev);
|
|
hdr_cap_show(hdev);
|
|
dv_cap_show(hdev);
|
|
dc_cap_show(hdev);
|
|
edid_cap_show(hdev);
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int xtochar(int num, char* checksum)
|
|
{
|
|
struct hdmitx_dev *hdev = hdmitx_get_hdev();
|
|
|
|
if (!hdev) {
|
|
printf("null hdmitx dev\n");
|
|
return -1;
|
|
}
|
|
if (((hdev->rawedid[num] >> 4 ) & 0xf) <= 9)
|
|
checksum[0] = ((hdev->rawedid[num] >> 4 ) & 0xf) + '0';
|
|
else
|
|
checksum[0] = ((hdev->rawedid[num] >> 4 ) & 0xf) -10 + 'a';
|
|
|
|
if ((hdev->rawedid[num] & 0xf) <= 9)
|
|
checksum[1] = (hdev->rawedid[num] & 0xf) + '0';
|
|
else
|
|
checksum[1] = (hdev->rawedid[num] & 0xf) -10 + 'a';
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* hdr_priority definition:
|
|
* strategy1: bit[3:0]
|
|
* 0: original cap
|
|
* 1: disable dolby vision cap
|
|
* 2: disable dolby vision and hdr/hlg cap
|
|
* strategy2:
|
|
* bit4: 1: disable dv 0:enable dv
|
|
* bit5: 1: disable hdr10/hdr10+ 0: enable hdr10/hdr10+
|
|
* bit6: 1: disable hlg 0: enable hlg
|
|
* bit28-bit31 choose strategy: bit[31:28]
|
|
* 0: strategy1
|
|
* 1: strategy2
|
|
*/
|
|
|
|
/* for uboot, there is no need to dynamically change the hdr_priority as
|
|
* kernel. So below functions only implement the disable_xxx_info() function,
|
|
* and leave the enable_xxx_info as blank
|
|
*/
|
|
|
|
/* dv_info */
|
|
static void enable_dv_info(struct dv_info *des, const struct dv_info *src)
|
|
{
|
|
if (!des || !src)
|
|
return;
|
|
}
|
|
|
|
static void disable_dv_info(struct dv_info *des)
|
|
{
|
|
if (!des)
|
|
return;
|
|
|
|
memset(des, 0, sizeof(*des));
|
|
}
|
|
|
|
/* hdr10 */
|
|
static void enable_hdr10_info(struct hdr_info *des, const struct hdr_info *src)
|
|
{
|
|
if (!des || !src)
|
|
return;
|
|
}
|
|
|
|
static void disable_hdr10_info(struct hdr_info *des)
|
|
{
|
|
if (!des)
|
|
return;
|
|
|
|
des->hdr_support = des->hdr_support & 0xB;
|
|
des->static_metadata_type1 = 0;
|
|
des->lumi_max = 0;
|
|
des->lumi_avg = 0;
|
|
des->lumi_min = 0;
|
|
}
|
|
|
|
/* hdr10plus */
|
|
static void enable_hdr10p_info(struct hdr10_plus_info *des, const struct hdr10_plus_info *src)
|
|
{
|
|
if (!des || !src)
|
|
return;
|
|
}
|
|
|
|
static void disable_hdr10p_info(struct hdr10_plus_info *des)
|
|
{
|
|
if (!des)
|
|
return;
|
|
|
|
memset(des, 0, sizeof(*des));
|
|
}
|
|
|
|
/* hlg */
|
|
static void enable_hlg_info(struct hdr_info *des, const struct hdr_info *src)
|
|
{
|
|
if (!des || !src)
|
|
return;
|
|
}
|
|
|
|
static void disable_hlg_info(struct hdr_info *des)
|
|
{
|
|
if (!des)
|
|
return;
|
|
|
|
des->hdr_support = des->hdr_support & 0x7;
|
|
}
|
|
|
|
static void enable_all_hdr_info(struct rx_cap *prxcap)
|
|
{
|
|
if (!prxcap)
|
|
return;
|
|
}
|
|
|
|
static void update_hdr_strategy1(struct rx_cap *prxcap, u32 strategy)
|
|
{
|
|
if (!prxcap)
|
|
return;
|
|
|
|
switch (strategy) {
|
|
case 0:
|
|
enable_all_hdr_info(prxcap);
|
|
break;
|
|
case 1:
|
|
disable_dv_info(&prxcap->dv_info);
|
|
break;
|
|
case 2:
|
|
disable_dv_info(&prxcap->dv_info);
|
|
disable_hdr10_info(&prxcap->hdr_info);
|
|
disable_hdr10p_info(&prxcap->hdr10plus_info);
|
|
disable_hlg_info(&prxcap->hdr_info);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void update_hdr_strategy2(struct rx_cap *prxcap, u32 strategy)
|
|
{
|
|
if (!prxcap)
|
|
return;
|
|
|
|
/* bit4: 1 disable dv 0 enable dv */
|
|
if (strategy & BIT(4))
|
|
disable_dv_info(&prxcap->dv_info);
|
|
else
|
|
enable_dv_info(&prxcap->dv_info, NULL);
|
|
/* bit5: 1 disable hdr10/hdr10+ 0 enable hdr10/hdr10+ */
|
|
if (strategy & BIT(5)) {
|
|
disable_hdr10_info(&prxcap->hdr_info);
|
|
disable_hdr10p_info(&prxcap->hdr10plus_info);
|
|
} else {
|
|
enable_hdr10_info(&prxcap->hdr_info, NULL);
|
|
enable_hdr10p_info(&prxcap->hdr10plus_info, NULL);
|
|
}
|
|
/* bit6: 1 disable hlg 0 enable hlg */
|
|
if (strategy & BIT(6))
|
|
disable_hlg_info(&prxcap->hdr_info);
|
|
else
|
|
enable_hlg_info(&prxcap->hdr_info, NULL);
|
|
}
|
|
|
|
static int hdmitx_set_hdr_priority(struct rx_cap *prxcap, u32 hdr_priority)
|
|
{
|
|
u32 choose = 0;
|
|
u32 strategy = 0;
|
|
|
|
if (!prxcap)
|
|
return -1;
|
|
|
|
printf("%s, set hdr_prio: %u\n", __func__, hdr_priority);
|
|
/* choose strategy: bit[31:28] */
|
|
choose = (hdr_priority >> 28) & 0xf;
|
|
switch (choose) {
|
|
case 0:
|
|
strategy = hdr_priority & 0xf;
|
|
update_hdr_strategy1(prxcap, strategy);
|
|
break;
|
|
case 1:
|
|
strategy = hdr_priority & 0xf0;
|
|
update_hdr_strategy2(prxcap, strategy);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void get_parse_edid_data(struct hdmitx_dev *hdev)
|
|
{
|
|
unsigned char *edid = hdev->rawedid;
|
|
unsigned int byte_num = 0;
|
|
unsigned char blk_no = 1;
|
|
|
|
/* get edid data */
|
|
while (byte_num < 128 * blk_no) {
|
|
hdev->hwop.read_edid(&edid[byte_num], byte_num & 0x7f, byte_num / 128);
|
|
if (byte_num == 120) {
|
|
blk_no = edid[126] + 1;
|
|
if (blk_no > 4)
|
|
blk_no = 4; /* MAX Read Blocks 4 */
|
|
}
|
|
if (byte_num == 128) {
|
|
if (edid[128 + 4] == 0xe2 && edid[128 + 5] == 0x78)
|
|
blk_no = edid[128 + 6] + 1;
|
|
if (blk_no > EDID_BLK_NO)
|
|
blk_no = EDID_BLK_NO; /* MAX Read Blocks 8 */
|
|
}
|
|
byte_num += 8;
|
|
}
|
|
|
|
/* dump edid raw data */
|
|
dump_full_edid(hdev->rawedid);
|
|
|
|
/* parse edid data */
|
|
hdmi_edid_parsing(hdev->rawedid, &hdev->RXCap);
|
|
}
|
|
|
|
/* policy process: to find the output mode/attr/dv_type */
|
|
void scene_process(struct hdmitx_dev *hdev,
|
|
struct meson_policy_out *output)
|
|
{
|
|
struct meson_policy_in input;
|
|
|
|
hdmitx_set_mode_policy();
|
|
memset(&input, 0, sizeof(struct meson_policy_in));
|
|
get_hdmi_input(hdev, &input);
|
|
hdmitx_get_policy_output(output);
|
|
}
|
|
|
|
static int _do_get_parse_edid(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[])
|
|
{
|
|
struct hdmitx_dev *hdev = hdmitx_get_hdev();
|
|
unsigned char *store_checkvalue;
|
|
unsigned int i;
|
|
unsigned int checkvalue[4];
|
|
unsigned int checkvalue1;
|
|
unsigned int checkvalue2;
|
|
char checksum[11];
|
|
unsigned char def_cksum[] = {'0', 'x', '0', '0', '0', '0', '0', '0', '0', '0', '\0'};
|
|
char *hdmimode;
|
|
char *colorattribute;
|
|
int user_dv_mode;
|
|
char *last_output_mode;
|
|
char *last_colorattribute;
|
|
int last_dv_status;
|
|
bool over_write = false;
|
|
char dv_type[2] = {0};
|
|
struct meson_policy_out output;
|
|
struct hdmi_format_para *para = NULL;
|
|
bool mode_support = false;
|
|
/* hdmi_mode / colorattribute may be null or "none".
|
|
* if either is null or "none", it means user not
|
|
* selected manually, and need to select the best
|
|
* mode or colorattribute by policy
|
|
*/
|
|
bool no_manual_output = false;
|
|
/*
|
|
* The hdmitx driver gets the value of env too early in hdmitx21_init.
|
|
* The value of emmc's env partition has not been loaded yet.
|
|
* Therefore, the value obtained at this time is the data saved at compile time,
|
|
* which is the default value defined in board.h.
|
|
* To prevent this case, need to get the value of env later
|
|
*/
|
|
char *dongle_mode = env_get("dongle_mode");
|
|
char *edid_check = env_get("edid_check");
|
|
|
|
if (!hdev) {
|
|
printf("null hdmitx dev\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
if (dongle_mode && (dongle_mode[0] == '1'))
|
|
hdev->dongle_mode = 1;
|
|
|
|
if (edid_check && edid_check[0] != '\0') {
|
|
u8 tmp = edid_check[0] - '0';
|
|
|
|
if (tmp <= 3)
|
|
hdev->RXCap.edid_check = tmp;
|
|
else
|
|
hdev->RXCap.edid_check = 0;
|
|
} else {
|
|
hdev->RXCap.edid_check = 0;
|
|
}
|
|
|
|
printf("[%s][%d] dongle_mode=[%d], edid_check=[%d]\n", __func__, __LINE__,
|
|
hdev->dongle_mode, hdev->RXCap.edid_check);
|
|
|
|
if (!hdev->hpd_state) {
|
|
printf("HDMI HPD low, no need parse EDID\n");
|
|
return 1;
|
|
}
|
|
memset(&output, 0, sizeof(output));
|
|
memset(hdev->rawedid, 0, EDID_BLK_SIZE * EDID_BLK_NO);
|
|
|
|
get_parse_edid_data(hdev);
|
|
|
|
/* check if the tv has changed or anything wrong */
|
|
store_checkvalue = (unsigned char*)env_get("hdmichecksum");
|
|
/* get user selected output mode/color */
|
|
colorattribute = env_get("user_colorattribute");
|
|
hdmimode = env_get("hdmimode");
|
|
user_dv_mode = get_ubootenv_dv_type();
|
|
|
|
last_output_mode = env_get("outputmode");
|
|
last_colorattribute = env_get("colorattribute");
|
|
last_dv_status = get_ubootenv_dv_status();
|
|
|
|
if (!store_checkvalue)
|
|
store_checkvalue = def_cksum;
|
|
|
|
printf("read hdmichecksum: %s, user hdmimode: %s, colorattribute: %s, dv_type: %d\n",
|
|
store_checkvalue, hdmimode ? hdmimode : "null",
|
|
colorattribute ? colorattribute : "null", user_dv_mode);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
if (('0' <= store_checkvalue[i * 2 + 2]) && (store_checkvalue[i * 2 + 2] <= '9'))
|
|
checkvalue1 = store_checkvalue[i * 2 + 2] -'0';
|
|
else
|
|
checkvalue1 = store_checkvalue[i * 2 + 2] -'W';
|
|
if (('0' <= store_checkvalue[i * 2 + 3]) && (store_checkvalue[i * 2 + 3] <= '9'))
|
|
checkvalue2 = store_checkvalue[i * 2 + 3] -'0';
|
|
else
|
|
checkvalue2 = store_checkvalue[i * 2 + 3] -'W';
|
|
checkvalue[i] = checkvalue1 * 16 + checkvalue2;
|
|
}
|
|
|
|
if ((checkvalue[0] != hdev->rawedid[0x7f]) ||
|
|
(checkvalue[1] != hdev->rawedid[0xff]) ||
|
|
(checkvalue[2] != hdev->rawedid[0x17f]) ||
|
|
(checkvalue[3] != hdev->rawedid[0x1ff])) {
|
|
hdev->RXCap.edid_changed = 1;
|
|
|
|
checksum[0] = '0';
|
|
checksum[1] = 'x';
|
|
for (i = 0; i < 4; i++)
|
|
xtochar(0x80 * i + 0x7f, &checksum[2* i + 2]);
|
|
checksum[10] = '\0';
|
|
memcpy(hdev->RXCap.checksum, checksum, 10);
|
|
printf("TV has changed, now crc: %s\n", checksum);
|
|
} else {
|
|
memcpy(hdev->RXCap.checksum, store_checkvalue, 10);
|
|
printf("TV is the same, checksum: %s\n", hdev->RXCap.checksum);
|
|
}
|
|
|
|
/* check user have selected both mode/color or not */
|
|
if (!hdmimode || !strcmp(hdmimode, "none") ||
|
|
!colorattribute || !strcmp(colorattribute, "none"))
|
|
no_manual_output = true;
|
|
else
|
|
no_manual_output = false;
|
|
|
|
if (!no_manual_output) {
|
|
/* check current user selected mode + color support or not */
|
|
para = hdmi_tst_fmt_name(hdmimode, colorattribute);
|
|
if (hdmitx_edid_check_valid_mode(hdev, para))
|
|
mode_support = true;
|
|
else
|
|
mode_support = false;
|
|
|
|
/* if user selected mode/color/dv type which saved in ubootenv of
|
|
* hdmimode/user_colorattribute/user_prefer_dv_type are different
|
|
* with last actual output mode/color/dv type which saved in
|
|
* ubootenv of outputmode/colorattribute/dolby_status, then it means
|
|
* that the user selected format is over-written by policy(for example:
|
|
* firstly user has selected HDR priority to HDR, and select color
|
|
* to rgb,12bit(now the "user_colorattribute" env will be "rgb,12bit"),
|
|
* but then it selected HDR priority to DV, the actual output color
|
|
* will be "444,8bit" or "422,12bit" according to dv type, and
|
|
* the ubootenv "colorattribute" will be "444,8bit" or "422,12bit"),
|
|
* then uboot should use the policy to select the output format,
|
|
* otherwise, uboot use hdmimode/user_colorattribute/user_prefer_dv_type
|
|
* env, while system use outputmode/colorattribute/dolby_status env,
|
|
* there will be always a mode change during bootup
|
|
*/
|
|
if (mode_support) {
|
|
if (!last_output_mode || strcmp(hdmimode, last_output_mode))
|
|
over_write = true;
|
|
else if (!last_colorattribute ||
|
|
strcmp(colorattribute, last_colorattribute))
|
|
over_write = true;
|
|
else if (user_dv_mode != last_dv_status)
|
|
over_write = true;
|
|
else
|
|
over_write = false;
|
|
|
|
if (over_write)
|
|
printf("last output_mode:%s, colorattribute:%s, dolby_status:%d\n",
|
|
last_output_mode ? last_output_mode : "null",
|
|
last_colorattribute ? last_colorattribute : "null",
|
|
last_dv_status);
|
|
}
|
|
}
|
|
/* 4 cases need to decide output by uboot mode select policy:
|
|
* 1.TV changed
|
|
* 2.either hdmimode or colorattribute is NULL or "none",
|
|
* which means that user have not selected mode or colorattribute,
|
|
* and need to select the auto best mode or best colorattribute.
|
|
* 3.user selected mode not supported by uboot (probably
|
|
* means mode select policy or edid parse between sysctrl and
|
|
* uboot have some gap), then need to find proper output mode
|
|
* with uboot policy.
|
|
* 4.user selected mode is over written by system policy
|
|
*/
|
|
if (hdev->RXCap.edid_changed || no_manual_output || !mode_support || over_write) {
|
|
/* find proper mode if EDID changed */
|
|
scene_process(hdev, &output);
|
|
env_set("hdmichecksum", hdev->RXCap.checksum);
|
|
if (edid_parsing_ok(hdev)) {
|
|
env_set("outputmode",
|
|
output.displaymode);
|
|
env_set("colorattribute",
|
|
output.deepcolor);
|
|
/* if change from DV TV to HDR/SDR TV, don't change
|
|
* DV status to disabled, as DV core need to be enabled.
|
|
* that's to say connect DV TV & output DV-> power down box ->
|
|
* connect HDR/SDR TV -> power on box, the dolby_status
|
|
* will keep the same as that when connect DV TV under follow sink.
|
|
*/
|
|
if ((output.amdv_type !=
|
|
get_ubootenv_dv_status()) &&
|
|
(output.amdv_type !=
|
|
DOLBY_VISION_DISABLE)) {
|
|
sprintf(dv_type, "%d", output.amdv_type);
|
|
env_set("dolby_status", dv_type);
|
|
/* according to the policy of systemcontrol,
|
|
* if current DV mode is not supported by TV
|
|
* EDID, DV type maybe changed to one witch
|
|
* TV support, and need VPP/DV module to
|
|
* update new DV output mode.
|
|
*/
|
|
printf("update dolby_status: %d\n",
|
|
output.amdv_type);
|
|
}
|
|
} else {
|
|
save_default_720p();
|
|
}
|
|
printf("update outputmode: %s\n", env_get("outputmode"));
|
|
printf("update colorattribute: %s\n", env_get("colorattribute"));
|
|
printf("update hdmichecksum: %s\n", env_get("hdmichecksum"));
|
|
} else {
|
|
env_set("outputmode", hdmimode);
|
|
env_set("colorattribute", colorattribute);
|
|
}
|
|
/* ubootenv dolby_status is used for is_dv_preference() decision,
|
|
* system_control save current dv output status in it.
|
|
* it will be used by dv module later to decide DV output later.
|
|
* if currently adaptive hdr, then we should set dolby_status to
|
|
* 0, so that DV module won't enable DV.
|
|
*/
|
|
if (get_hdr_policy() == 1)
|
|
env_set("dolby_status", 0);
|
|
hdev->vic = hdmi_get_fmt_vic(env_get("outputmode"));
|
|
hdev->para = hdmi_get_fmt_paras(hdev->vic);
|
|
|
|
/* update the hdr/hdr10+/dv capabilities in the end of scene_process */
|
|
int hdr_priority = get_hdr_strategy_priority();
|
|
|
|
if (hdr_priority != -1)
|
|
hdmitx_set_hdr_priority(&hdev->RXCap, hdr_priority);
|
|
|
|
hdmitx_mask_rx_info(hdev);
|
|
return 0;
|
|
}
|
|
|
|
static int do_get_parse_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
|
|
{
|
|
hdmi_mode_frac_preprocess();
|
|
return _do_get_parse_edid(cmdtp, flag, argc, argv);
|
|
}
|
|
|
|
#ifdef CONFIG_EFUSE_OBJ_API
|
|
static int do_efuse_show(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
|
|
{
|
|
struct hdmitx_dev *hdev = hdmitx_get_hdev();
|
|
|
|
pr_info("FEAT_DISABLE_HDMI_60HZ = %d\n", hdev->efuse_dis_hdmi_4k60);
|
|
pr_info("FEAT_DISABLE_OUTPUT_4K = %d\n", hdev->efuse_dis_output_4k);
|
|
pr_info("FEAT_DISABLE_HDCP_TX_22 = %d\n", hdev->efuse_dis_hdcp_tx22);
|
|
pr_info("FEAT_DISABLE_HDMI_TX_3D = %d\n", hdev->efuse_dis_hdmi_tx3d);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void vout_hdmi_hpd(struct hdmitx_dev *hdev, int hpd_st)
|
|
{
|
|
char *hdmimode;
|
|
char *cvbsmode;
|
|
char *colorattribute;
|
|
|
|
/* get hdmi mode and colorattribute from env */
|
|
hdmimode = env_get("hdmimode");
|
|
if (hdmimode)
|
|
printf("%s: hdmimode=%s\n", __func__, hdmimode);
|
|
|
|
colorattribute = env_get("colorattribute");
|
|
if (colorattribute)
|
|
printf("%s: colorattribute=%s\n", __func__, colorattribute);
|
|
|
|
/*
|
|
* Check whether the current connector is HDMI or CVBS,
|
|
* and set a new value for the outputmode based on the HPD status.
|
|
* In this way, the LCD will not be processed.
|
|
* if hpd_st high, outputmode and connector0_type will be saved on hdmi side
|
|
* if hpd_st low, outputmode and connector0_type will be saved on cvbs side
|
|
*/
|
|
if (!hpd_st) {
|
|
cvbsmode = env_get("cvbsmode");
|
|
if (cvbsmode)
|
|
env_set("outputmode", cvbsmode);
|
|
env_set("hdmichecksum", "0x00000000");
|
|
env_set("connector0_type", "TV-1");
|
|
} else {
|
|
if (env_get("outputmode")) {
|
|
if (!strstr(env_get("outputmode"), "hz"))
|
|
env_set("outputmode", "1080p60hz");
|
|
} else {
|
|
printf("ERROR %s: outputmode env is NULL\n", __func__);
|
|
env_set("outputmode", "1080p60hz");
|
|
}
|
|
switch (hdev->enc_idx) {
|
|
case 0:
|
|
env_set("connector0_type", "HDMI-A-A");
|
|
break;
|
|
case 1:
|
|
env_set("connector0_type", "HDMI-A-B");
|
|
break;
|
|
case 2:
|
|
env_set("connector0_type", "HDMI-A-C");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void vout2_hdmi_hpd(struct hdmitx_dev *hdev, int hpd_st)
|
|
{
|
|
char *hdmimode;
|
|
char *cvbsmode;
|
|
char *colorattribute;
|
|
|
|
/* get hdmi mode and colorattribute from env */
|
|
hdmimode = env_get("hdmimode");
|
|
if (hdmimode)
|
|
printf("%s: hdmimode=%s\n", __func__, hdmimode);
|
|
colorattribute = env_get("colorattribute");
|
|
if (colorattribute)
|
|
printf("%s: colorattribute=%s\n", __func__, colorattribute);
|
|
|
|
/*
|
|
* Check whether the current connector is HDMI or CVBS,
|
|
* and set a new value for the outputmode2 based on the HPD status.
|
|
* if hpd_st high, outputmode2 will be saved on hdmi side
|
|
* if hpd_st low, outputmode2 will be saved on cvbs side
|
|
*/
|
|
if (!hpd_st) {
|
|
cvbsmode = env_get("cvbsmode");
|
|
if (cvbsmode)
|
|
env_set("outputmode2", cvbsmode);
|
|
env_set("hdmichecksum", "0x00000000");
|
|
} else {
|
|
if (env_get("outputmode2")) {
|
|
if (!strstr(env_get("outputmode2"), "hz"))
|
|
env_set("outputmode2", "1080p60hz");
|
|
} else {
|
|
printf("ERROR %s: outputmode2 env is NULL\n", __func__);
|
|
env_set("outputmode2", "1080p60hz");
|
|
}
|
|
}
|
|
}
|
|
|
|
int do_hpd_detect(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
|
|
{
|
|
char *st;
|
|
int hpd_st = 0;
|
|
unsigned long i = 0;
|
|
/* some TV sets pull hpd high 1.3S after detect pwr5v high */
|
|
unsigned long hdmitx_hpd_wait_cnt = 15;
|
|
#ifdef CONFIG_AML_HDMITX20
|
|
struct hdmitx_dev *hdev = hdmitx_get_hdev();
|
|
#else
|
|
struct hdmitx_dev *hdev = get_hdmitx21_device();
|
|
#endif
|
|
unsigned short on_connector_dev = vout_connector_check(0);
|
|
|
|
char *outputmode, *outputmode2, *connector0_type, *connector1_type;
|
|
|
|
if (env_get_yesno("hdmitx_hpd_bypass") == 1) {
|
|
printf("hdmitx_hpd_bypass detect\n");
|
|
return 0;
|
|
}
|
|
|
|
st = env_get("hdmitx_hpd_wait_cnt");
|
|
if (st)
|
|
hdmitx_hpd_wait_cnt = simple_strtoul(st, NULL, 10);
|
|
hpd_st = hdev->hwop.get_hpd_state();
|
|
|
|
if (!hpd_st) {
|
|
/* For some TV, they cost extra time to pullup HPD after 5V */
|
|
|
|
for (i = 0; i < hdmitx_hpd_wait_cnt; i++) {
|
|
mdelay(100);
|
|
hpd_st = hdev->hwop.get_hpd_state();
|
|
if (hpd_st) {
|
|
printf("hpd delay %lu ms\n", (i + 1) * 100);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
printf("%s, hpd_state=%d\n", __func__, hpd_st);
|
|
|
|
#ifdef CONFIG_MAX_BOOT_TIME
|
|
if (!hpd_st)
|
|
env_set_ulong("hpd_detect", i * 100 * 1000);
|
|
#endif
|
|
|
|
outputmode = env_get("outputmode");
|
|
outputmode2 = env_get("outputmode2");
|
|
connector0_type = env_get("connector0_type");
|
|
connector1_type = env_get("connector1_type");
|
|
|
|
printf("%s: outputmode=%s, outputmode2=%s, connector0_type=%s, connector1_type=%s\n",
|
|
__func__,
|
|
outputmode ? outputmode : "NULL",
|
|
outputmode2 ? outputmode2 : "NULL",
|
|
connector0_type ? connector0_type : "NULL",
|
|
connector1_type ? connector1_type : "NULL");
|
|
|
|
/*
|
|
* lacks the both env "connector0_type" and "connector1_type"
|
|
* set "HDMI-A-A" for "connector0_type", and notice to burn the whole image
|
|
*/
|
|
if (!connector0_type && !connector1_type) {
|
|
env_set("connector0_type", "HDMI-A-A");
|
|
printf("ERROR %s, miss env connectorX_type, must burn the whole image\n", __func__);
|
|
printf("%s:set default connector0_type=%s\n", __func__, env_get("connector0_type"));
|
|
}
|
|
/*
|
|
* Check whether the current connector is HDMI or CVBS
|
|
* In this way, the LCD will not be processed.
|
|
*/
|
|
for (i = 0; i < 3; i++) {
|
|
on_connector_dev = vout_connector_check(i);
|
|
if ((on_connector_dev & CONNECTOR_DEV_MASK) == CONNECTOR_DEV_HDMI ||
|
|
(on_connector_dev & CONNECTOR_DEV_MASK) == CONNECTOR_DEV_CVBS) {
|
|
if (i == 0) {
|
|
vout_hdmi_hpd(hdev, hpd_st);
|
|
} else if (i == 1) {
|
|
vout2_hdmi_hpd(hdev, hpd_st);
|
|
} else {
|
|
printf("warning unregistered connectorX_type\n");
|
|
vout_hdmi_hpd(hdev, hpd_st);
|
|
}
|
|
}
|
|
}
|
|
|
|
hdev->hpd_state = hpd_st;
|
|
return hpd_st;
|
|
}
|
|
|
|
static cmd_tbl_t cmd_hdmi_sub[] = {
|
|
U_BOOT_CMD_MKENT(hpd, 1, 1, do_hpd_detect, "", ""),
|
|
U_BOOT_CMD_MKENT(edid, 3, 1, do_edid, "", ""),
|
|
U_BOOT_CMD_MKENT(rx_det, 1, 1, do_rx_det, "", ""),
|
|
U_BOOT_CMD_MKENT(output, 3, 1, do_output, "", ""),
|
|
U_BOOT_CMD_MKENT(blank, 3, 1, do_blank, "", ""),
|
|
U_BOOT_CMD_MKENT(off, 1, 1, do_off, "", ""),
|
|
U_BOOT_CMD_MKENT(dump, 1, 1, do_dump, "", ""),
|
|
U_BOOT_CMD_MKENT(info, 1, 1, do_info, "", ""),
|
|
U_BOOT_CMD_MKENT(reg, 3, 1, do_reg, "", ""),
|
|
U_BOOT_CMD_MKENT(get_parse_edid, 1, 1, do_get_parse_edid, "", ""),
|
|
#ifdef CONFIG_EFUSE_OBJ_API
|
|
U_BOOT_CMD_MKENT(efuse, 1, 1, do_efuse_show, "", ""),
|
|
#endif
|
|
};
|
|
|
|
static int do_hdmitx(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
|
|
{
|
|
cmd_tbl_t *c;
|
|
|
|
if (argc < 2)
|
|
return cmd_usage(cmdtp);
|
|
|
|
argc--;
|
|
argv++;
|
|
|
|
c = find_cmd_tbl(argv[0], &cmd_hdmi_sub[0], ARRAY_SIZE(cmd_hdmi_sub));
|
|
|
|
if (c)
|
|
return c->cmd(cmdtp, flag, argc, argv);
|
|
else
|
|
return cmd_usage(cmdtp);
|
|
}
|
|
|
|
U_BOOT_CMD(hdmitx, CONFIG_SYS_MAXARGS, 0, do_hdmitx,
|
|
"HDMITX sub-system",
|
|
"hdmitx version:20200618\n"
|
|
"hdmitx hpd\n"
|
|
" Detect hdmi rx plug-in\n"
|
|
#if 0
|
|
"hdmitx edid read ADDRESS\n"
|
|
" Read hdmi rx edid from ADDRESS(0x00~0xff)\n"
|
|
#endif
|
|
"hdmitx output [list | FORMAT | bist PATTERN]\n"
|
|
" list: list support formats\n"
|
|
" FORMAT can be 720p60/50hz, 1080i60/50hz, 1080p60hz, etc\n"
|
|
" extend with 8bits/10bits, y444/y422/y420/rgb\n"
|
|
" such as 2160p60hz,10bits,y420\n"
|
|
" PATTERN: can be as: line, dot, off, or 1920(width)\n"
|
|
"hdmitx blank [0|1]\n"
|
|
" 1: output blank 0: output normal\n"
|
|
"hdmitx off\n"
|
|
" Turn off hdmitx output\n"
|
|
"hdmitx info\n"
|
|
" current mode info\n"
|
|
"hdmitx rx_det\n"
|
|
" Auto detect if RX is FBC and set outputmode\n"
|
|
);
|
|
|
|
struct hdr_info *hdmitx_get_rx_hdr_info(void)
|
|
{
|
|
struct hdmitx_dev *hdev = hdmitx_get_hdev();
|
|
|
|
return &hdev->RXCap.hdr_info;
|
|
}
|