BPI-CM9-Linux/aml-comp/multimedia/mediahal-sdk/mediahal_setup.sh

#!/bin/sh

show_help() {
    echo "Usage: $0 [-m MEDIAHAL_LOGGER_LEVEL] [-t TSPLAYER_DEBUG_LEVEL] [-r VIDEO_RENDER_LOG_LEVEL] [-d AMTSPLAYER_DEMUX_PTS_DEBUG] [-a AMCODEC_USERDATA_DEBUG] [-p AMCODEC_PTSSERVER_DEBUG] [-v AMCODEC_VDA_DEBUG_LEVEL] [-h]"
    echo "  -m    MEDIAHAL_LOGGER_LEVEL,default is 3"
    echo "  -t    TSPLAYER_DEBUG_LEVEL,default is 0"
    echo "  -r    VIDEO_RENDER_LOG_LEVEL,default is 2"
    echo "  -d    AMTSPLAYER_DEMUX_PTS_DEBUG,default is 0;if 1,will open dmx driver debug"
    echo "  -a    AMCODEC_USERDATA_DEBUG,default is 0"
    echo "  -p    AMCODEC_PTSSERVER_DEBUG,default is 0;if 1,will open pts_srv decoder media_sync driver debug"
    echo "  -v    AMCODEC_VDA_DEBUG_LEVEL,default is 0"
    echo "  -s    stop last $(basename $0) and logcat"
    echo "  -h    Show help information"
    exit 1
}

stop_func() {
	echo "stop last $(basename $0) and last logcat"
	PIDS=$(pgrep -f $(basename $0))
	CURRENT_PID=$$

	for PID in $PIDS; do
	    if [ "$PID" != "$CURRENT_PID" ]; then
	        echo "kill the last $(basename $0) pid:$PID cur_pid:$CURRENT_PID";
		kill $PID;
	    fi
	done
	echo "kill last logcat"
	pkill -f logcat;
	sync;
}

#more than one parameter must be checked
if [ $# -lt 1 ]; then
    echo "Error: Enter at least one parameter."
    show_help
fi

#default value
MEDIAHAL_LOGGER_LEVEL=3
TSPLAYER_DEBUG_LEVEL=0
VIDEO_RENDER_LOG_LEVEL=2
AMTSPLAYER_DEMUX_PTS_DEBUG=0
AMCODEC_USERDATA_DEBUG=0
AMCODEC_PTSSERVER_DEBUG=0
AMCODEC_VDA_DEBUG_LEVEL=0

while [ $# -gt 0 ]; do
  case "$1" in
    -m)
      MEDIAHAL_LOGGER_LEVEL=$2
      echo "-m set MEDIAHAL_LOGGER_LEVEL=$MEDIAHAL_LOGGER_LEVEL"
	  shift
      ;;
    -t)
      TSPLAYER_DEBUG_LEVEL=$2
      echo "-t set TSPLAYER_DEBUG_LEVEL=$TSPLAYER_DEBUG_LEVEL"
	  shift
      ;;
    -r)
      VIDEO_RENDER_LOG_LEVEL=$2
	  echo "-r set VIDEO_RENDER_LOG_LEVEL=$VIDEO_RENDER_LOG_LEVEL"
      shift
      ;;
    -d)
      AMTSPLAYER_DEMUX_PTS_DEBUG=$2
	  echo "-d set AMTSPLAYER_DEMUX_PTS_DEBUG=$AMTSPLAYER_DEMUX_PTS_DEBUG"
      shift
      ;;
    -a)
      AMCODEC_USERDATA_DEBUG=$2
	  echo "-a set AMCODEC_USERDATA_DEBUG=$AMCODEC_USERDATA_DEBUG"
      shift
      ;;
    -p)
      AMCODEC_PTSSERVER_DEBUG=$2
	  echo "-p set AMCODEC_PTSSERVER_DEBUG=$AMCODEC_PTSSERVER_DEBUG"
      shift
      ;;
    -v)
      AMCODEC_VDA_DEBUG_LEVEL=$2
	  echo "-v set AMCODEC_VDA_DEBUG_LEVEL=$AMCODEC_VDA_DEBUG_LEVEL"
      shift
      ;;
    -h)
      show_help
      exit 0
      ;;
    -s)
      stop_func
      exit 0
      ;;
    *)
      show_help
      exit 1
      ;;
  esac
  shift  # move to next param
done

stop_func

echo "mediahal:setprop MEDIAHAL_LOGGER_LEVEL $MEDIAHAL_LOGGER_LEVEL,\
setprop TSPLAYER_DEBUG_LEVEL $TSPLAYER_DEBUG_LEVEL,\
setprop VIDEO_RENDER_LOG_LEVEL $VIDEO_RENDER_LOG_LEVEL,\
setprop AMTSPLAYER_DEMUX_PTS_DEBUG $AMTSPLAYER_DEMUX_PTS_DEBUG,\
setprop AMCODEC_USERDATA_DEBUG $AMCODEC_USERDATA_DEBUG,\
setprop AMCODEC_PTSSERVER_DEBUG $AMCODEC_PTSSERVER_DEBUG,\
setprop AMCODEC_VDA_DEBUG_LEVEL $AMCODEC_VDA_DEBUG_LEVEL;"\
> /sys/class/resource_mgr/res_sys_debug;

#printf all params
#echo "MEDIAHAL_LOGGER_LEVEL=$MEDIAHAL_LOGGER_LEVEL"
#echo "TSPLAYER_DEBUG_LEVEL=$TSPLAYER_DEBUG_LEVEL"
#echo "VIDEO_RENDER_LOG_LEVEL=$VIDEO_RENDER_LOG_LEVEL"
#echo "AMTSPLAYER_DEMUX_PTS_DEBUG=$AMTSPLAYER_DEMUX_PTS_DEBUG"
#echo "AMCODEC_USERDATA_DEBUG=$AMCODEC_USERDATA_DEBUG"
#echo "AMCODEC_PTSSERVER_DEBUG=$AMCODEC_PTSSERVER_DEBUG"
#echo "AMCODEC_VDA_DEBUG_LEVEL=$AMCODEC_VDA_DEBUG_LEVEL"

node_a="/sys/module/dvb_demux/parameters/debug_ts_output"
node_b="/sys/module/amlogic_dvb_demux/parameters/debug_ts_output"
if [ "$AMTSPLAYER_DEMUX_PTS_DEBUG" -eq 1 ]; then
    echo "AMTSPLAYER_DEMUX_PTS_DEBUG is 1，open demux driver debug..."
	echo 1 > /sys/module/stream_input/parameters/pts_checkin_debug;
	if [ -e "$node_a" ]; then
		echo "has node a $node_a"
		echo 1 > $node_a;
	elif [ -e "$node_b" ]; then
		echo "has node b $node_b"
		echo 1 > $node_b;
	fi
fi

if [ "$AMCODEC_PTSSERVER_DEBUG" -eq 1 ]; then
    echo "AMCODEC_PTSSERVER_DEBUG is 1，open pts_srv decoder media_sync driver debug..."
	echo 0x18fb > /sys/module/amvdec_mmpeg12/parameters/debug_enable
	echo 0x60006807 > /sys/module/amvdec_h265/parameters/debug;
	echo 0x0000ff > /sys/module/amvdec_mh264/parameters/h264_debug_flag;
	echo 3 > /sys/module/pts_server/parameters/ptsserver_debuglevel;
	echo 3 > /sys/module/media_sync/parameters/media_sync_debug_level;
fi

echo 0x30 > /sys/module/media_sync/parameters/media_sync_user_debug_level;
echo 2 > /sys/module/media_sync/parameters/media_sync_policy_debug_level;
echo 4 > /sys/module/media_sync/parameters/media_sync_vf_debug_level;
echo 0 > /proc/sys/kernel/printk;

USB_PATH=$(mount | grep -i "sda" | awk '{print $3}' | head -n 1 | sed 's/://g')

if [ -d "$USB_PATH" ]; then
    echo "find usb path success:$USB_PATH"
else
    echo "can not find usb path:$USB_PATH,please insert external hard drive"
	exit 1
fi

rm $USB_PATH/logcat.txt;logcat -c;logcat -v time > $USB_PATH/logcat.txt&
rm -rf $USB_PATH/log12.txt; dmesg -c > /dev/null;while true;do dmesg -c >> $USB_PATH/log12.txt;sync;done&

echo "catch log ing >>>>>"