953 lines
23 KiB
C
953 lines
23 KiB
C
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2019 Amlogic, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/resource.h>
|
|
#include <linux/types.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/module.h>
|
|
|
|
#include "pcie-designware.h"
|
|
|
|
#define to_amlogic_pcie(x) dev_get_drvdata((x)->dev)
|
|
|
|
#define PCIE_CAP_MAX_PAYLOAD_SIZE(x) ((x) << 5)
|
|
#define PCIE_CAP_MAX_READ_REQ_SIZE(x) ((x) << 12)
|
|
|
|
/* PCIe specific config registers */
|
|
#define PCIE_CFG0 0x0
|
|
#define APP_LTSSM_ENABLE BIT(7)
|
|
|
|
#define PCIE_CFG_STATUS12 0x30
|
|
#define IS_SMLH_LINK_UP(x) (((x) >> 6) & 0x1)
|
|
#define IS_RDLH_LINK_UP(x) (((x) >> 16) & 0x1)
|
|
#define IS_LTSSM_UP(x) ((((x) >> 10) & 0x1f) == 0x11)
|
|
|
|
#define PCIE_CFG_STATUS17 0x44
|
|
#define PM_CURRENT_STATE(x) (((x) >> 7) & 0x1)
|
|
|
|
#define WAIT_LINKUP_TIMEOUT 100000
|
|
#define MAX_PAYLOAD_SIZE 256
|
|
#define MAX_READ_REQ_SIZE 256
|
|
#define PCIE_RESET_DELAY 500
|
|
#define PCIE_SHARED_RESET 1
|
|
#define PCIE_NORMAL_RESET 0
|
|
|
|
static int link_times_v2 = WAIT_LINKUP_TIMEOUT - 10;
|
|
module_param(link_times_v2, int, 0644);
|
|
MODULE_PARM_DESC(link_times_v2, "select pcie link times");
|
|
|
|
enum pcie_phy_type {
|
|
DW_PHY,
|
|
M31_COMBPHY,
|
|
};
|
|
|
|
struct amlogic_pcie {
|
|
struct dw_pcie pci;
|
|
|
|
void __iomem *elbi_base;
|
|
void __iomem *cfg_base;
|
|
void __iomem *phy_base;
|
|
void __iomem *reset_base;
|
|
|
|
struct clk *pcie_clk;
|
|
struct clk *phy_clk;
|
|
struct clk *refpll_clk;
|
|
struct clk *dev_clk;
|
|
|
|
struct reset_control *ctrl_rst;
|
|
struct reset_control *apb_rst;
|
|
struct reset_control *phy_rst;
|
|
|
|
u32 ctrl_rst_bit;
|
|
u32 apb_rst_bit;
|
|
u32 phy_rst_bit;
|
|
|
|
struct phy *phy;
|
|
|
|
int reset_gpio;
|
|
bool do_reset_gpio;
|
|
u32 gpio_type;
|
|
u32 phy_type;
|
|
u32 msi_mask;
|
|
};
|
|
|
|
static inline void amlogic_pcie_disable_clocks(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
clk_disable_unprepare(aml_pcie->pcie_clk);
|
|
clk_disable_unprepare(aml_pcie->refpll_clk);
|
|
clk_disable_unprepare(aml_pcie->phy_clk);
|
|
clk_disable_unprepare(aml_pcie->dev_clk);
|
|
}
|
|
|
|
static int amlogic_pcie_enable_clocks(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
struct dw_pcie *pci = &aml_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret = 0;
|
|
|
|
ret = clk_prepare_enable(aml_pcie->dev_clk);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable dev_clk clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(aml_pcie->phy_clk);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable phy_clk clock\n");
|
|
goto err_dev_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(aml_pcie->refpll_clk);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable refpll_clk clock\n");
|
|
goto err_phy_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(aml_pcie->pcie_clk);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie_clk clock\n");
|
|
goto err_refpll_clk;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_refpll_clk:
|
|
clk_disable_unprepare(aml_pcie->refpll_clk);
|
|
err_phy_clk:
|
|
clk_disable_unprepare(aml_pcie->phy_clk);
|
|
err_dev_clk:
|
|
clk_disable_unprepare(aml_pcie->dev_clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amlogic_pcie_get_clocks(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
struct dw_pcie *pci = &aml_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
|
|
aml_pcie->phy_clk = devm_clk_get(dev, "pcie_phy");
|
|
if (IS_ERR(aml_pcie->phy_clk))
|
|
return dev_err_probe(dev, PTR_ERR(aml_pcie->phy_clk),
|
|
"phy_clk clock source missing or invalid\n");
|
|
|
|
aml_pcie->pcie_clk = devm_clk_get(dev, "pcie");
|
|
if (IS_ERR(aml_pcie->pcie_clk))
|
|
return dev_err_probe(dev, PTR_ERR(aml_pcie->pcie_clk),
|
|
"pcie_clk clock source missing or invalid\n");
|
|
|
|
aml_pcie->refpll_clk = devm_clk_get(dev, "pcie_refpll");
|
|
if (IS_ERR(aml_pcie->refpll_clk))
|
|
return dev_err_probe(dev, PTR_ERR(aml_pcie->refpll_clk),
|
|
"refpll_clk clock source missing or invalid\n");
|
|
|
|
aml_pcie->dev_clk = devm_clk_get(dev, "pcie_hcsl");
|
|
if (IS_ERR(aml_pcie->dev_clk))
|
|
return dev_err_probe(dev, PTR_ERR(aml_pcie->dev_clk),
|
|
"dev_clk clock source missing or invalid\n");
|
|
return 0;
|
|
}
|
|
|
|
static int amlogic_pcie_get_mems(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
struct dw_pcie *pci = &aml_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct resource *res;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
|
|
if (res) {
|
|
aml_pcie->elbi_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(aml_pcie->elbi_base)) {
|
|
dev_err(dev, "failed to request elbi_base\n");
|
|
return PTR_ERR(aml_pcie->elbi_base);
|
|
}
|
|
pci->dbi_base = aml_pcie->elbi_base;
|
|
} else {
|
|
dev_err(dev, "failed to get elbi_base resource\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
|
|
if (res) {
|
|
aml_pcie->cfg_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(aml_pcie->cfg_base)) {
|
|
dev_err(dev, "failed to request cfg_base\n");
|
|
return PTR_ERR(aml_pcie->cfg_base);
|
|
}
|
|
} else {
|
|
dev_err(dev, "failed to get cfg_base resource\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amlogic_pcie_phy_power_on(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
struct device *dev = aml_pcie->pci.dev;
|
|
int ret = 0;
|
|
u32 val;
|
|
|
|
if (IS_ERR(aml_pcie->phy))
|
|
goto set_phy_reg;
|
|
|
|
ret = phy_init(aml_pcie->phy);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = phy_power_on(aml_pcie->phy);
|
|
if (ret) {
|
|
/* check return value, just for coverity */
|
|
ret = phy_exit(aml_pcie->phy);
|
|
if (ret) {
|
|
dev_dbg(dev, " pcie phy exit failed\n");
|
|
return ret;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
|
|
set_phy_reg:
|
|
switch (aml_pcie->phy_type) {
|
|
case M31_COMBPHY:
|
|
dev_dbg(dev, " pcie init port and M31_COMBPHY\n");
|
|
val = readl(aml_pcie->phy_base);
|
|
val &= ~(BIT(0) | BIT(22) | BIT(25));
|
|
val |= BIT(17);
|
|
writel(val, aml_pcie->phy_base);
|
|
break;
|
|
case DW_PHY:
|
|
default:
|
|
dev_dbg(dev, " pcie init port and DW_PHY\n");
|
|
writel(0x1c, aml_pcie->phy_base);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void amlogic_pcie_phy_power_off(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
struct device *dev = aml_pcie->pci.dev;
|
|
int ret = 0;
|
|
u32 val;
|
|
|
|
if (IS_ERR(aml_pcie->phy))
|
|
goto set_phy_reg;
|
|
|
|
/* check return value, just for coverity */
|
|
ret = phy_power_off(aml_pcie->phy);
|
|
if (ret)
|
|
dev_dbg(dev, " pcie phy power off failed\n");
|
|
ret = phy_exit(aml_pcie->phy);
|
|
if (ret)
|
|
dev_dbg(dev, " pcie phy exit failed\n");
|
|
|
|
set_phy_reg:
|
|
switch (aml_pcie->phy_type) {
|
|
case M31_COMBPHY:
|
|
dev_dbg(dev, " pcie deinit port and M31_COMBPHY\n");
|
|
val = readl(aml_pcie->reset_base);
|
|
val &= ~(1 << aml_pcie->phy_rst_bit);
|
|
writel(val, aml_pcie->reset_base);
|
|
break;
|
|
case DW_PHY:
|
|
default:
|
|
dev_dbg(dev, " pcie deinit port and DW_PHY\n");
|
|
writel(0x1d, aml_pcie->phy_base);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int amlogic_pcie_get_phy(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
struct dw_pcie *pci = &aml_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct resource *res;
|
|
|
|
aml_pcie->phy = devm_phy_get(dev, "pcie-phy");
|
|
if (IS_ERR(aml_pcie->phy)) {
|
|
if (PTR_ERR(aml_pcie->phy) != -EPROBE_DEFER)
|
|
goto get_phy_reg;
|
|
}
|
|
|
|
get_phy_reg:
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
|
|
if (res) {
|
|
aml_pcie->phy_base = devm_ioremap(dev, res->start, resource_size(res));
|
|
if (IS_ERR(aml_pcie->phy_base)) {
|
|
dev_err(dev, "failed to request phy_base\n");
|
|
return PTR_ERR(aml_pcie->phy_base);
|
|
}
|
|
} else {
|
|
dev_err(dev, "failed to get phy_base resource\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (of_property_read_u32(dev->of_node, "phy-type", &aml_pcie->phy_type))
|
|
aml_pcie->phy_type = DW_PHY;
|
|
dev_dbg(dev, "PCIE phy type is %d\n", aml_pcie->phy_type);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amlogic_pcie_get_reset(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
struct dw_pcie *pci = &aml_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct resource *res;
|
|
int ret = 0;
|
|
|
|
aml_pcie->ctrl_rst = devm_reset_control_get_exclusive(dev, "ctrl_rst");
|
|
if (IS_ERR(aml_pcie->ctrl_rst)) {
|
|
if (PTR_ERR(aml_pcie->ctrl_rst) != -EPROBE_DEFER)
|
|
goto get_rst_reg;
|
|
}
|
|
|
|
aml_pcie->apb_rst = devm_reset_control_get_exclusive(dev, "apb_rst");
|
|
if (IS_ERR(aml_pcie->apb_rst)) {
|
|
if (PTR_ERR(aml_pcie->apb_rst) != -EPROBE_DEFER)
|
|
dev_err(dev, "apb_rst property in node\n");
|
|
return PTR_ERR(aml_pcie->apb_rst);
|
|
}
|
|
|
|
aml_pcie->phy_rst = devm_reset_control_get_exclusive(dev, "phy_rst");
|
|
if (IS_ERR(aml_pcie->phy_rst)) {
|
|
if (PTR_ERR(aml_pcie->phy_rst) != -EPROBE_DEFER)
|
|
dev_err(dev, "phy_rst property in node\n");
|
|
return PTR_ERR(aml_pcie->phy_rst);
|
|
}
|
|
|
|
return 0;
|
|
|
|
get_rst_reg:
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reset");
|
|
if (res) {
|
|
aml_pcie->reset_base = devm_ioremap(dev, res->start, resource_size(res));
|
|
if (IS_ERR(aml_pcie->reset_base)) {
|
|
dev_err(dev, "failed to request reset_base\n");
|
|
return PTR_ERR(aml_pcie->reset_base);
|
|
}
|
|
} else {
|
|
dev_err(dev, "failed to get reset_base resource\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = of_property_read_u32(node, "pcie-apb-rst-bit",
|
|
&aml_pcie->apb_rst_bit);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request apb_rst_bit\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = of_property_read_u32(node, "pcie-phy-rst-bit",
|
|
&aml_pcie->phy_rst_bit);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request phy_rst_bit\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = of_property_read_u32(node, "pcie-ctrl-rst-bit",
|
|
&aml_pcie->ctrl_rst_bit);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request ctrl_rst_bit\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amlogic_pcie_set_reset_gpio(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
struct dw_pcie *pci = &aml_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret;
|
|
|
|
if (!aml_pcie->do_reset_gpio) {
|
|
dev_info(dev, "GPIO no need reset for W2 when resume\n");
|
|
return 0;
|
|
}
|
|
|
|
/* reset-gpio-type 0:Shared pad(no reset) 1:OD pad 2:Normal pad */
|
|
if (aml_pcie->gpio_type == 0) {
|
|
dev_info(dev, "gpio multiplex, don't reset!\n");
|
|
} else if (aml_pcie->gpio_type == 1) {
|
|
dev_info(dev, "pad gpio\n");
|
|
if (gpio_is_valid(aml_pcie->reset_gpio)) {
|
|
dev_info(dev, "GPIO pad: assert reset\n");
|
|
ret = gpio_direction_output(aml_pcie->reset_gpio, 0);
|
|
if (ret)
|
|
return ret;
|
|
usleep_range(5000, 6000);
|
|
ret = gpio_direction_input(aml_pcie->reset_gpio);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
} else {
|
|
dev_dbg(dev, "normal gpio\n");
|
|
if (gpio_is_valid(aml_pcie->reset_gpio)) {
|
|
dev_info(dev, "GPIO normal: assert reset\n");
|
|
usleep_range(100000, 110000);
|
|
gpio_set_value_cansleep(aml_pcie->reset_gpio, 1);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amlogic_pcie_get_reset_gpio(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
struct dw_pcie *pci = &aml_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
struct device_node *node = dev->of_node;
|
|
int ret;
|
|
|
|
ret = of_property_read_u32(node, "gpio-type",
|
|
&aml_pcie->gpio_type);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request gpio-type\n");
|
|
return ret;
|
|
}
|
|
|
|
aml_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
|
|
if (gpio_is_valid(aml_pcie->reset_gpio)) {
|
|
ret = devm_gpio_request_one(dev, aml_pcie->reset_gpio,
|
|
GPIOF_OUT_INIT_LOW,
|
|
"pcie_perst");
|
|
if (ret) {
|
|
dev_err(dev, "unable to get reset gpio\n");
|
|
return ret;
|
|
}
|
|
} else {
|
|
dev_err(dev, "failed to get reset-gpio\n");
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int amlogic_pcie_assert_reset(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
struct dw_pcie *pci = &aml_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret = 0, val = 0;
|
|
|
|
if (aml_pcie->reset_base)
|
|
goto set_rst_reg;
|
|
|
|
ret = reset_control_assert(aml_pcie->phy_rst);
|
|
if (ret < 0) {
|
|
dev_err(dev, "assert phy_rst err %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_assert(aml_pcie->apb_rst);
|
|
if (ret < 0) {
|
|
dev_err(dev, "assert apb_rst err %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_assert(aml_pcie->ctrl_rst);
|
|
if (ret < 0) {
|
|
dev_err(dev, "assert ctrl_rst err %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
|
|
set_rst_reg:
|
|
val = readl(aml_pcie->reset_base);
|
|
val &= ~((1 << aml_pcie->ctrl_rst_bit) | (1 << aml_pcie->phy_rst_bit) |
|
|
(1 << aml_pcie->apb_rst_bit));
|
|
writel(val, aml_pcie->reset_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amlogic_pcie_deassert_reset(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
struct dw_pcie *pci = &aml_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret = 0, val = 0;
|
|
|
|
if (aml_pcie->reset_base)
|
|
goto set_rst_reg;
|
|
|
|
ret = reset_control_deassert(aml_pcie->phy_rst);
|
|
if (ret < 0) {
|
|
dev_err(dev, "deassert phy_rst err %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_deassert(aml_pcie->apb_rst);
|
|
if (ret < 0) {
|
|
dev_err(dev, "deassert apb_rst err %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_deassert(aml_pcie->ctrl_rst);
|
|
if (ret < 0) {
|
|
dev_err(dev, "deassert ctrl_rst err %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
|
|
set_rst_reg:
|
|
|
|
val = readl(aml_pcie->reset_base);
|
|
val |= (1 << aml_pcie->ctrl_rst_bit) | (1 << aml_pcie->phy_rst_bit) |
|
|
(1 << aml_pcie->apb_rst_bit);
|
|
writel(val, aml_pcie->reset_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amlogic_pcie_parse_dt(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
int err;
|
|
|
|
err = amlogic_pcie_get_clocks(aml_pcie);
|
|
if (err)
|
|
return err;
|
|
|
|
err = amlogic_pcie_get_mems(aml_pcie);
|
|
if (err)
|
|
return err;
|
|
|
|
err = amlogic_pcie_get_phy(aml_pcie);
|
|
if (err)
|
|
return err;
|
|
|
|
err = amlogic_pcie_get_reset(aml_pcie);
|
|
if (err)
|
|
return err;
|
|
|
|
err = amlogic_pcie_get_reset_gpio(aml_pcie);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline u32 amlogic_cfg_readl(struct amlogic_pcie *aml_pcie, u32 reg)
|
|
{
|
|
return readl(aml_pcie->cfg_base + reg);
|
|
}
|
|
|
|
static inline void amlogic_cfg_writel(struct amlogic_pcie *aml_pcie, u32 val, u32 reg)
|
|
{
|
|
writel(val, aml_pcie->cfg_base + reg);
|
|
}
|
|
|
|
static void amlogic_pcie_ltssm_enable(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
u32 val;
|
|
|
|
val = amlogic_cfg_readl(aml_pcie, PCIE_CFG0);
|
|
val |= APP_LTSSM_ENABLE;
|
|
amlogic_cfg_writel(aml_pcie, val, PCIE_CFG0);
|
|
}
|
|
|
|
static int amlogic_size_to_payload(struct amlogic_pcie *aml_pcie, int size)
|
|
{
|
|
struct device *dev = aml_pcie->pci.dev;
|
|
|
|
/*
|
|
* dwc supports 2^(val+7) payload size, which val is 0~5 default to 1.
|
|
* So if input size is not 2^order alignment or less than 2^7 or bigger
|
|
* than 2^12, just set to default size 2^(1+7).
|
|
*/
|
|
if (!is_power_of_2(size) || size < 128 || size > 4096) {
|
|
dev_warn(dev, "payload size %d, set to default 256\n", size);
|
|
return 1;
|
|
}
|
|
|
|
return fls(size) - 8;
|
|
}
|
|
|
|
static void amlogic_set_max_payload(struct amlogic_pcie *aml_pcie, int size)
|
|
{
|
|
struct dw_pcie *pci = &aml_pcie->pci;
|
|
u32 val;
|
|
u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
|
|
int max_payload_size = amlogic_size_to_payload(aml_pcie, size);
|
|
|
|
val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_DEVCTL);
|
|
val &= ~PCI_EXP_DEVCTL_PAYLOAD;
|
|
dw_pcie_writel_dbi(pci, offset + PCI_EXP_DEVCTL, val);
|
|
|
|
val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_DEVCTL);
|
|
val |= PCIE_CAP_MAX_PAYLOAD_SIZE(max_payload_size);
|
|
dw_pcie_writel_dbi(pci, offset + PCI_EXP_DEVCTL, val);
|
|
}
|
|
|
|
static void amlogic_set_max_rd_req_size(struct amlogic_pcie *aml_pcie, int size)
|
|
{
|
|
struct dw_pcie *pci = &aml_pcie->pci;
|
|
u32 val;
|
|
u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
|
|
int max_rd_req_size = amlogic_size_to_payload(aml_pcie, size);
|
|
|
|
val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_DEVCTL);
|
|
val &= ~PCI_EXP_DEVCTL_READRQ;
|
|
dw_pcie_writel_dbi(pci, offset + PCI_EXP_DEVCTL, val);
|
|
|
|
val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_DEVCTL);
|
|
val |= PCIE_CAP_MAX_READ_REQ_SIZE(max_rd_req_size);
|
|
dw_pcie_writel_dbi(pci, offset + PCI_EXP_DEVCTL, val);
|
|
}
|
|
|
|
static int amlogic_pcie_rd_own_conf(struct pci_bus *bus, u32 devfn,
|
|
int where, int size, u32 *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = pci_generic_config_read(bus, devfn, where, size, val);
|
|
if (ret != PCIBIOS_SUCCESSFUL)
|
|
return ret;
|
|
|
|
/*
|
|
* There is a bug in the MESON AXG PCIe controller whereby software
|
|
* cannot program the PCI_CLASS_DEVICE register, so we must fabricate
|
|
* the return value in the config accessors.
|
|
*/
|
|
if (where == PCI_CLASS_REVISION && size == 4)
|
|
*val = (PCI_CLASS_BRIDGE_PCI << 16) | (*val & 0xffff);
|
|
else if (where == PCI_CLASS_DEVICE && size == 2)
|
|
*val = PCI_CLASS_BRIDGE_PCI;
|
|
else if (where == PCI_CLASS_DEVICE && size == 1)
|
|
*val = PCI_CLASS_BRIDGE_PCI & 0xff;
|
|
else if (where == PCI_CLASS_DEVICE + 1 && size == 1)
|
|
*val = (PCI_CLASS_BRIDGE_PCI >> 8) & 0xff;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static void __iomem *amlogic_pcie_own_conf_map_bus(struct pci_bus *bus,
|
|
unsigned int devfn, int where)
|
|
{
|
|
struct dw_pcie_rp *pp = bus->sysdata;
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
u32 val;
|
|
|
|
val = dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1);
|
|
if (!(val & PCIE_PORT_DEBUG1_LINK_UP)) {
|
|
dev_err(pci->dev, "LTSSM link down, pls check HW design, maybe HW interference\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (PCI_SLOT(devfn) > 0)
|
|
return NULL;
|
|
|
|
return pci->dbi_base + where;
|
|
}
|
|
|
|
static struct pci_ops amlogic_pci_ops = {
|
|
.map_bus = amlogic_pcie_own_conf_map_bus,
|
|
.read = amlogic_pcie_rd_own_conf,
|
|
.write = pci_generic_config_write,
|
|
};
|
|
|
|
static int amlogic_pcie_start_link(struct dw_pcie *pci)
|
|
{
|
|
struct amlogic_pcie *aml_pcie = to_amlogic_pcie(pci);
|
|
struct device *dev = pci->dev;
|
|
u32 tmp, state12, smlh_up = 0, ltssm_up = 0, rdlh_up = 0, cnt = 0;
|
|
u8 offset;
|
|
ktime_t start, end;
|
|
|
|
amlogic_pcie_ltssm_enable(aml_pcie);
|
|
|
|
start = ktime_get();
|
|
|
|
do {
|
|
state12 = amlogic_cfg_readl(aml_pcie, PCIE_CFG_STATUS12);
|
|
smlh_up = IS_SMLH_LINK_UP(state12);
|
|
rdlh_up = IS_RDLH_LINK_UP(state12);
|
|
ltssm_up = IS_LTSSM_UP(state12) ? 1 : 0;
|
|
|
|
if (smlh_up)
|
|
dev_dbg(dev, "smlh_link_up is on\n");
|
|
if (rdlh_up)
|
|
dev_dbg(dev, "rdlh_link_up is on\n");
|
|
if (ltssm_up)
|
|
dev_dbg(dev, "ltssm_up is on\n");
|
|
|
|
if (cnt > WAIT_LINKUP_TIMEOUT) {
|
|
dev_err(dev, "Error: Wait linkup timeout. Pls check pcie device\n");
|
|
goto err_linkup;
|
|
} else if (unlikely(cnt >= link_times_v2)) {
|
|
dev_info(dev, "ltssm_up = 0x%x\n", ((state12 >> 10) & 0x1f));
|
|
}
|
|
|
|
cnt++;
|
|
|
|
udelay(2);
|
|
} while (smlh_up == 0 || rdlh_up == 0 || ltssm_up == 0);
|
|
|
|
end = ktime_get();
|
|
dev_info_once(dev, "LTSSM consumes time:%llu us\n", ktime_to_us(ktime_sub(end, start)));
|
|
|
|
offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
|
|
tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
|
|
usleep_range(100, 200);
|
|
|
|
dev_info(dev, "Link up, GEN%i,link width is x%d\n", tmp & PCI_EXP_LNKSTA_CLS,
|
|
(tmp & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT);
|
|
|
|
return 0;
|
|
|
|
err_linkup:
|
|
dev_err(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
|
|
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
|
|
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int amlogic_pcie_host_init(struct dw_pcie_rp *pp)
|
|
{
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
struct amlogic_pcie *aml_pcie = to_amlogic_pcie(pci);
|
|
int ret;
|
|
|
|
pp->bridge->ops = &amlogic_pci_ops;
|
|
|
|
ret = amlogic_pcie_assert_reset(aml_pcie);
|
|
if (ret)
|
|
return ret;
|
|
ret = amlogic_pcie_deassert_reset(aml_pcie);
|
|
if (ret)
|
|
return ret;
|
|
ret = amlogic_pcie_phy_power_on(aml_pcie);
|
|
if (ret)
|
|
return ret;
|
|
amlogic_set_max_payload(aml_pcie, MAX_PAYLOAD_SIZE);
|
|
amlogic_set_max_rd_req_size(aml_pcie, MAX_READ_REQ_SIZE);
|
|
|
|
amlogic_pcie_set_reset_gpio(aml_pcie);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_pcie_host_ops amlogic_pcie_host_ops = {
|
|
.init = amlogic_pcie_host_init,
|
|
};
|
|
|
|
static const struct dw_pcie_ops dw_pcie_ops = {
|
|
.start_link = amlogic_pcie_start_link,
|
|
};
|
|
|
|
static void amlogic_pcie_host_compatible_special_dev(struct amlogic_pcie *amlogic)
|
|
{
|
|
struct pci_dev *dev = NULL;
|
|
|
|
for_each_pci_dev(dev) {
|
|
if (dev->vendor == 0X1F35) {
|
|
amlogic->do_reset_gpio = false;
|
|
dev_dbg(amlogic->pci.dev, "dev->vendor =0x%x\n", dev->vendor);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int amlogic_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct dw_pcie *pci;
|
|
struct amlogic_pcie *aml_pcie;
|
|
int ret;
|
|
|
|
aml_pcie = devm_kzalloc(dev, sizeof(*aml_pcie), GFP_KERNEL);
|
|
if (!aml_pcie)
|
|
return -ENOMEM;
|
|
|
|
aml_pcie->do_reset_gpio = true;
|
|
pci = &aml_pcie->pci;
|
|
pci->dev = dev;
|
|
pci->ops = &dw_pcie_ops;
|
|
pci->pp.ops = &amlogic_pcie_host_ops;
|
|
|
|
ret = amlogic_pcie_parse_dt(aml_pcie);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = amlogic_pcie_enable_clocks(aml_pcie);
|
|
if (ret)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, aml_pcie);
|
|
|
|
/* pcie dev memory protect check*/
|
|
if (!of_property_read_bool(dev->of_node, "iommu-map"))
|
|
dev_err(dev, "PCIe device memory protect failed, pls check dts node(iommu-map)\n");
|
|
|
|
ret = dw_pcie_host_init(&pci->pp);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Add PCIe port failed, %d\n", ret);
|
|
goto err_disable_clk;
|
|
}
|
|
|
|
/* some pcie device workround */
|
|
amlogic_pcie_host_compatible_special_dev(aml_pcie);
|
|
|
|
return 0;
|
|
|
|
err_disable_clk:
|
|
amlogic_pcie_disable_clocks(aml_pcie);
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static void amlogic_pcie_ltssm_disable(struct amlogic_pcie *aml_pcie)
|
|
{
|
|
u32 val;
|
|
|
|
val = amlogic_cfg_readl(aml_pcie, PCIE_CFG0);
|
|
val &= ~APP_LTSSM_ENABLE;
|
|
amlogic_cfg_writel(aml_pcie, val, PCIE_CFG0);
|
|
}
|
|
|
|
static int amlogic_pcie_suspend_noirq(struct device *dev)
|
|
{
|
|
struct amlogic_pcie *aml_pcie = dev_get_drvdata(dev);
|
|
struct dw_pcie_rp *pp = &aml_pcie->pci.pp;
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
u32 ctrl, num_ctrls;
|
|
|
|
if (pp->has_msi_ctrl) {
|
|
num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
|
|
|
|
for (ctrl = 0; ctrl < num_ctrls; ctrl++)
|
|
aml_pcie->msi_mask = dw_pcie_readl_dbi(pci, PCIE_MSI_INTR0_MASK +
|
|
(ctrl * MSI_REG_CTRL_BLOCK_SIZE));
|
|
}
|
|
|
|
amlogic_pcie_ltssm_disable(aml_pcie);
|
|
amlogic_pcie_disable_clocks(aml_pcie);
|
|
amlogic_pcie_phy_power_off(aml_pcie);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amlogic_pcie_resume_noirq(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct amlogic_pcie *aml_pcie = dev_get_drvdata(dev);
|
|
struct dw_pcie_rp *pp = &aml_pcie->pci.pp;
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
u32 ctrl, num_ctrls;
|
|
|
|
ret = amlogic_pcie_enable_clocks(aml_pcie);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = amlogic_pcie_host_init(pp);
|
|
if (ret) {
|
|
dev_err(dev, "resume host init failed.\n");
|
|
goto err_resume_host_init;
|
|
}
|
|
|
|
dw_pcie_setup_rc(pp);
|
|
|
|
if (pp->has_msi_ctrl) {
|
|
num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
|
|
|
|
for (ctrl = 0; ctrl < num_ctrls; ctrl++)
|
|
dw_pcie_writel_dbi(pci, PCIE_MSI_INTR0_MASK +
|
|
(ctrl * MSI_REG_CTRL_BLOCK_SIZE), aml_pcie->msi_mask);
|
|
}
|
|
|
|
ret = amlogic_pcie_start_link(&aml_pcie->pci);
|
|
if (ret < 0)
|
|
goto err_resume_host_init;
|
|
|
|
return 0;
|
|
|
|
err_resume_host_init:
|
|
amlogic_pcie_disable_clocks(aml_pcie);
|
|
amlogic_pcie_phy_power_off(aml_pcie);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops aml_pcie_pm_ops = {
|
|
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(amlogic_pcie_suspend_noirq,
|
|
amlogic_pcie_resume_noirq)
|
|
};
|
|
|
|
static void amlogic_pcie_remove(struct platform_device *pdev)
|
|
{
|
|
struct amlogic_pcie *aml_pcie = platform_get_drvdata(pdev);
|
|
struct dw_pcie_rp *pp = &aml_pcie->pci.pp;
|
|
|
|
dw_pcie_host_deinit(pp);
|
|
amlogic_pcie_disable_clocks(aml_pcie);
|
|
amlogic_pcie_assert_reset(aml_pcie);
|
|
amlogic_pcie_phy_power_off(aml_pcie);
|
|
}
|
|
|
|
static void amlogic_pcie_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct amlogic_pcie *aml_pcie = platform_get_drvdata(pdev);
|
|
|
|
amlogic_pcie_disable_clocks(aml_pcie);
|
|
amlogic_pcie_assert_reset(aml_pcie);
|
|
amlogic_pcie_phy_power_off(aml_pcie);
|
|
}
|
|
|
|
static const struct of_device_id amlogic_pcie_v2_of_match[] = {
|
|
{
|
|
.compatible = "amlogic, amlogic-pcie-v2",
|
|
},
|
|
{
|
|
.compatible = "amlogic,amlogic-pcie-v2",
|
|
},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, amlogic_pcie_v2_of_match);
|
|
|
|
static struct platform_driver amlogic_pcie_v2_driver = {
|
|
.probe = amlogic_pcie_probe,
|
|
.remove = amlogic_pcie_remove,
|
|
.driver = {
|
|
.suppress_bind_attrs = true,
|
|
.name = "amlogic-pcie-v2",
|
|
.of_match_table = amlogic_pcie_v2_of_match,
|
|
.pm = &aml_pcie_pm_ops,
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
},
|
|
.shutdown = amlogic_pcie_shutdown,
|
|
};
|
|
|
|
int __init aml_pcie_rc_v2_init(void)
|
|
{
|
|
return platform_driver_register(&amlogic_pcie_v2_driver);
|
|
}
|
|
|
|
void __exit aml_pcie_rc_v2_exit(void)
|
|
{
|
|
platform_driver_unregister(&amlogic_pcie_v2_driver);
|
|
}
|
|
|
|
/*
|
|
* module_platform_driver(amlogic_pcie_driver);
|
|
*
|
|
* MODULE_AUTHOR("Amlogic Inc.");
|
|
* MODULE_DESCRIPTION("Amlogic PCIe Controller driver");
|
|
* MODULE_LICENSE("GPL v2");
|
|
*/
|