BPI-CM9-Linux/aml-comp/kernel/aml-6.12/common_drivers/drivers/clk/meson/clk-cpu-dyndiv.c

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
 * Copyright (c) 2019 BayLibre, SAS.
 * Author: Neil Armstrong <[email protected]>
 */

#include <linux/clk.h>
#include <linux/module.h>
#include <linux/amlogic/arm-smccc.h>
#include "clk-regmap.h"
#include "clk-cpu-dyndiv.h"

#define CPU_DYN_SEL_MASK	BIT(10)
#define SYS_CLK_SEL_MASK	BIT(15)

static inline struct meson_clk_cpu_dyn_data *
meson_clk_cpu_dyn_data(struct clk_regmap *clk)
{
	return (struct meson_clk_cpu_dyn_data *)clk->data;
}

static unsigned long meson_clk_cpu_dyn_recalc_rate(struct clk_hw *hw,
						   unsigned long prate)
{
	struct clk_regmap *clk = to_clk_regmap(hw);
	struct meson_clk_cpu_dyn_data *data = meson_clk_cpu_dyn_data(clk);
	unsigned int val, pindex, div;
	unsigned long rate, nprate = 0;
	struct arm_smccc_res res;

	/* get cpu register value */
	if (data->smc_id) {
		arm_smccc_smc(data->smc_id, data->secid_dyn_rd,
			      0, 0, 0, 0, 0, 0, &res);
		val = res.a0;
	} else {
		regmap_read(clk->map, data->offset, &val);
	}

	/* Confirm Now cpu is on final0 or final1 , bit10 = 0 or 1 */
	if (val & CPU_DYN_SEL_MASK) {
		pindex = (val >> 16) & 0x3;
		nprate = clk_hw_get_rate(clk_hw_get_parent_by_index(hw, pindex));
		if ((val >> 18) & 0x1) {
			div = (val >> 20) & 0x3f;
			rate = DIV_ROUND_UP_ULL((u64)nprate, div + 1);
		} else {
			rate = nprate;
		}
	} else {
		/* Get parent rate */
		pindex = val & 0x3;
		nprate = clk_hw_get_rate(clk_hw_get_parent_by_index(hw, pindex));
		if ((val >> 2) & 0x1) {
			div = (val >> 4) & 0x3f;
			rate = DIV_ROUND_UP_ULL((u64)nprate, div + 1);
		} else {
			rate = nprate;
		}
	}

	return rate;
}

/* find the best rate near to target rate */
static long meson_clk_cpu_dyn_round_rate(struct clk_hw *hw,
					 unsigned long rate,
					 unsigned long *prate)
{
	struct clk_regmap *clk = to_clk_regmap(hw);
	struct meson_clk_cpu_dyn_data *data = meson_clk_cpu_dyn_data(clk);
	struct cpu_dyn_table *table = (struct cpu_dyn_table *)data->table;
	unsigned long min, max;
	unsigned int i, cnt = data->table_cnt;

	min = table[0].rate;
	max = table[cnt - 1].rate;

	if (rate < min)
		return min;

	if (rate > max)
		return max;

	for (i = 0; i < data->table_cnt; i++) {
		if (rate <= table[i].rate)
			return table[i].rate;
	}

	return min;
}

static int meson_cpu_dyn_set(struct clk_hw *hw, u16 dyn_pre_mux, u16 dyn_post_mux, u16 dyn_div)
{
	struct clk_regmap *clk = to_clk_regmap(hw);
	struct meson_clk_cpu_dyn_data *data = meson_clk_cpu_dyn_data(clk);
	unsigned int control;
	unsigned int cnt = 0;

	// Make sure not busy from last setting and we currently match the last setting
	do {
		regmap_read(clk->map, data->offset, &control);
		udelay(1);
		cnt++;
		if (cnt > 100) {
			pr_err("cpu fsm is busy, offset=0x%x\n", data->offset);
			break;
		}
	} while ((control & (1 << 28)));

	control = control | (1 << 26);// Enable

	if (control & (1 << 10)) {     // if using Dyn mux1, set dyn mux 0
		// Toggle bit[10] indicating a dynamic mux change
		control = (control & (~((1 << 10) | (0x3f << 4)  | (1 << 2)  | (0x3 << 0))))
			  | ((0 << 10)
			  | (dyn_div << 4)
			  | (dyn_post_mux << 2)
			  | (dyn_pre_mux << 0));
	} else {
		// Toggle bit[10] indicating a dynamic mux change
		control = (control & (~((1 << 10) | (0x3f << 20) | (1 << 18) | (0x3 << 16))))
			  | ((1 << 10)
			  | (dyn_div << 20)
			  | (dyn_post_mux << 18)
			  | (dyn_pre_mux << 16));
	}
	/* Do not touch bit 11, it belongs to the CPU mux clk */

	regmap_write(clk->map, data->offset, control);

	return 0;
}

static int meson_clk_cpu_dyn_set_rate(struct clk_hw *hw, unsigned long rate,
				      unsigned long parent_rate)
{
	struct clk_regmap *clk = to_clk_regmap(hw);
	struct meson_clk_cpu_dyn_data *data = meson_clk_cpu_dyn_data(clk);
	struct cpu_dyn_table *table = (struct cpu_dyn_table *)data->table;
	struct arm_smccc_res res;
	unsigned int nrate, i;

	for (i = 0; i < data->table_cnt; i++) {
		if (rate == table[i].rate) {
			table = &table[i];
			break;
		}
	}
	nrate = table->rate;

	/* For set more than 1G, need to set additional parent frequency */
	if (nrate > 1000000000 && !strcmp(clk_hw_get_name(hw), "dsu_dyn_clk")) {
		if (clk_get_rate(hw->clk) > 1000000000) {
			/* switch dsu to fix div2 */
			if (data->smc_id)
				arm_smccc_smc(data->smc_id, data->secid_dyn,
				      1, 0, 0, 0, 0, 0, &res);
			else
				meson_cpu_dyn_set(hw, 1, 0, 0);
			/* udelay(50); */
		}
		clk_set_rate(clk_hw_get_parent_by_index(hw, 3)->clk, nrate);
	}

	if (data->smc_id)
		arm_smccc_smc(data->smc_id, data->secid_dyn,
		      table->dyn_pre_mux, table->dyn_post_mux, table->dyn_div,
		      0, 0, 0, &res);
	else
		meson_cpu_dyn_set(hw, table->dyn_pre_mux, table->dyn_post_mux, table->dyn_div);

	return 0;
}

static u8 meson_clk_cpu_dyn_get_parent(struct clk_hw *hw)
{
	struct clk_regmap *clk = to_clk_regmap(hw);
	struct meson_clk_cpu_dyn_data *data = meson_clk_cpu_dyn_data(clk);
	u32 pre_shift, val;
	struct arm_smccc_res res;

	if (data->smc_id) {
		arm_smccc_smc(data->smc_id, data->secid_dyn_rd,
			      0, 0, 0, 0, 0, 0, &res);
		val = res.a0;
	} else {
		regmap_read(clk->map, data->offset, &val);
	}

	if (val & CPU_DYN_SEL_MASK)
		pre_shift = 16;
	else
		pre_shift = 0;

	val = val >> pre_shift;
	val &= 0x3;
	if (val >= clk_hw_get_num_parents(hw))
		return -EINVAL;

	return val;
}

/* set the cpu fixed clk as one level clk */
const struct clk_ops meson_clk_cpu_dyn_ops = {
	.recalc_rate = meson_clk_cpu_dyn_recalc_rate,
	.round_rate = meson_clk_cpu_dyn_round_rate,
	.set_rate = meson_clk_cpu_dyn_set_rate,
	.get_parent = meson_clk_cpu_dyn_get_parent
};
EXPORT_SYMBOL_GPL(meson_clk_cpu_dyn_ops);

static u8 meson_sec_sys_clk_get_parent(struct clk_hw *hw)
{
	struct clk_regmap *clk = to_clk_regmap(hw);
	struct meson_clk_cpu_dyn_data *data = meson_clk_cpu_dyn_data(clk);
	u32 pre_shift, val;
	struct arm_smccc_res res;

	arm_smccc_smc(data->smc_id, data->secid_dyn_rd,
			0, 0, 0, 0, 0, 0, &res);
	val = res.a0;

	if (val & SYS_CLK_SEL_MASK)
		pre_shift = 26;
	else
		pre_shift = 10;

	val = val >> pre_shift;
	val &= 0x7;
	if (val >= clk_hw_get_num_parents(hw))
		return -EINVAL;

	return val;
}

static unsigned long meson_sec_sys_clk_recalc_rate(struct clk_hw *hw,
						      unsigned long prate)
{
	struct clk_regmap *clk = to_clk_regmap(hw);
	struct meson_clk_cpu_dyn_data *data = meson_clk_cpu_dyn_data(clk);
	unsigned int val, pindex, div;
	unsigned long nprate = 0;
	struct arm_smccc_res res;

	/* get cpu register value */
	arm_smccc_smc(data->smc_id, data->secid_dyn_rd,
			0, 0, 0, 0, 0, 0, &res);
	val = res.a0;

	/* Confirm Now cpu is on final0 or final1 , bit10 = 0 or 1 */
	if (val & SYS_CLK_SEL_MASK) {
		pindex = (val >> 26) & 0x7;
		nprate = clk_hw_get_rate(clk_hw_get_parent_by_index(hw, pindex));
		div = (val >> 16) & 0x3ff;
	} else {
		/* Get parent rate */
		pindex = (val >> 10) & 0x7;
		nprate = clk_hw_get_rate(clk_hw_get_parent_by_index(hw, pindex));
		div = (val >> 0) & 0x3ff;
	}

	return DIV_ROUND_UP_ULL((u64)nprate, div + 1);
}

static int meson_sec_sys_clk_save_context(struct clk_hw *hw)
{
	struct clk_regmap *clk = to_clk_regmap(hw);
	struct meson_clk_cpu_dyn_data *data = meson_clk_cpu_dyn_data(clk);

	data->saved_rate = meson_sec_sys_clk_recalc_rate(hw,
		       clk_hw_get_rate(clk_hw_get_parent(hw)));

	return 0;
}

static void meson_sec_sys_clk_restore_context(struct clk_hw *hw)
{
	struct clk_regmap *clk = to_clk_regmap(hw);
	struct meson_clk_cpu_dyn_data *data = meson_clk_cpu_dyn_data(clk);

	meson_clk_cpu_dyn_set_rate(hw, data->saved_rate,
				   clk_hw_get_rate(clk_hw_get_parent(hw)));
}

const struct clk_ops meson_sec_sys_clk_ops = {
	.recalc_rate = meson_sec_sys_clk_recalc_rate,
	.round_rate = meson_clk_cpu_dyn_round_rate,
	.set_rate = meson_clk_cpu_dyn_set_rate,
	.get_parent = meson_sec_sys_clk_get_parent,
	.save_context = meson_sec_sys_clk_save_context,
	.restore_context = meson_sec_sys_clk_restore_context
};
EXPORT_SYMBOL_GPL(meson_sec_sys_clk_ops);

MODULE_DESCRIPTION("Amlogic CPU Dynamic Clock divider");
MODULE_AUTHOR("Neil Armstrong <[email protected]>");
MODULE_LICENSE("GPL v2");