# MBa8MP-RAS314 with TQMa8MPxL
BOARD_NAME="MBa8MP-RAS314"
BOARD_VENDOR="tqgroup"
BOARDFAMILY="imx8m"
BOARD_MAINTAINER="schmiedelm"
HAS_VIDEO_OUTPUT="yes"
ATF_PLAT="imx8mp"
ATF_UART_BASE="0x30a60000"
BOOTCONFIG="tqma8mpxl_multi_mba8mp_ras314_defconfig"
KERNEL_TARGET="current"
MODULES_BLACKLIST="btnxpuart" # would be loaded delayed by udev rule
DEFAULT_CONSOLE="serial"
SERIALCON="ttymxc3"
BOOT_FDT_FILE="freescale/imx8mp-tqma8mpql-mba8mp-ras314.dtb"
ASOUND_STATE="asound.state.tqma"

function post_family_tweaks_bsp__mba8mpxl-ras314() {

	# Wifi & Bluetooth (use firmware from NXP)
	curl -fLOJ https://github.com/nxp-imx/imx-firmware/raw/lf-6.6.3_1.0.0/nxp/FwImage_8997/pcieuart8997_combo_v4.bin || {
		echo "download of pcieuart8997_combo_v4.bin failed"
		rm -f pcieuart8997_combo_v4.bin
		exit 1
	}
	run_host_command_logged mkdir -pv --mode=755 "$destination/lib/firmware/" || exit_with_error "Unable to mkdir firmware"
	run_host_command_logged mkdir -v --mode=775 "$destination/lib/firmware/mrvl/" || exit_with_error "Unable to mkdir mrvl"
	run_host_command_logged mv -v "pcieuart8997_combo_v4.bin" "$destination/lib/firmware/mrvl/" || exit_with_error "Unable to copy mrvl firmware"

	# Add udev rule to delay btnxpuart loading
	cat <<- NXP_UDEV_RULE > "${destination}"/etc/udev/rules.d/10-nxp-bluetooth-delay.rules
		# wait until combo FW is loaded by wifi driver
		KERNEL=="mlan*", ACTION=="add", RUN+="/sbin/modprobe btnxpuart"
	NXP_UDEV_RULE

	# fix X11 config
	mkdir -p "$destination"/etc/X11/xorg.conf.d

	cat <<- XORG_HDMI_CONF > "$destination"/etc/X11/xorg.conf.d/10-hdmi.conf
		Section "Device"
			Identifier "etnaviv"
			Driver     "modesetting"
			Option     "kmsdev"      "/dev/dri/card1"
			Option     "AccelMethod" "none" ### "glamor" to enable 3D acceleration, "none" to disable.
			Option     "Atomic"      "On"
		EndSection

		Section "ServerFlags"
			Option     "AutoAddGPU"  "false"
			Option     "DRI"         "3"
		EndSection
	XORG_HDMI_CONF

}