diff -rupbN linux.orig/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketace.dts linux/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketace.dts
--- linux.orig/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketace.dts	1970-01-01 00:00:00.000000000 +0000
+++ linux/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketace.dts	2025-02-26 13:52:56.398992835 +0000
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ * Copyright (c) 2025, ROCKNIX (https://github.com/ROCKNIX)
+ */
+
+/dts-v1/;
+
+#include "qcs8550-ayaneo-pocket-common.dtsi"
+
+/ {
+	model = "AYANEO Pocket ACE";
+	qcom,board-id = <0x1000b 0x01>;
+	qcom,msm-id = <0x258 0x20000>, <0x259 0x20000>;
+	compatible = "ayaneo,pocketace", "qcom,qcs8550", "qcom,sm8550";
+	rocknix-u-boot-dt-id = "u-boot-pocket-ace";
+};
+
+&tlmm {
+	panel_pwr_active: panel-pwr-active-state {
+		pins = "gpio72", "gpio42", "gpio152", "gpio153";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	panel_pwr_sleep: panel-pwr-sleep-state {
+		pins = "gpio72", "gpio42", "gpio152", "gpio153";
+		function = "gpio";
+		output-low;
+	};
+
+	backlight_pwr_active: backlight-pwr-active-state {
+		pins = "gpio41";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	backlight_pwr_sleep: backlight-pwr-sleep-state {
+		pins = "gpio41";
+		function = "gpio";
+		output-low;
+	};
+
+	ts_int_active: ts-int-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&i2c0 {
+   clock-frequency = <400000>;
+	status = "okay";
+
+	/* Screen power */
+	sgm3804: regulator@3e {
+		compatible = "sgmicro,sgm3804";
+		reg = <0x3e>;
+		pinctrl-0 = <&panel_pwr_active>;
+		pinctrl-1 = <&panel_pwr_sleep>;
+		pinctrl-names = "default", "sleep";
+		regulator-name = "panel-avdd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>, <&tlmm 153 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* Backlight */
+	backlight: sy7758@2e {
+		compatible = "silergy,sy7758";
+		reg = <0x2e>;
+		pinctrl-0 = <&backlight_pwr_active>;
+		pinctrl-1 = <&backlight_pwr_sleep>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 25 0x2008>;
+
+		pinctrl-names = "active";
+		pinctrl-0 = <&ts_int_active>;
+
+		reset-gpios = <&tlmm 24 0x01>;
+
+		vio-supply = <&vreg_l12b_1p8>;
+		vdd-supply = <&vreg_l14b_3p2>;
+		
+		syna,startup-delay-ms = <200>;
+		syna,reset-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			syna,nosleep-mode = <0x1>;
+			reg = <0x1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,rezero-wait-ms = <20>;
+			syna,clip-x-low = <0>;
+			syna,clip-y-low = <0>;
+			syna,clip-x-high = <1080>;
+			syna,clip-y-high = <1620>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&display_panel {
+	compatible = "ayaneo,pocket-ace-panel";
+
+	avdd-supply = <&sgm3804>;
+	vci-supply = <&vreg_l13b_3p0>;
+	vddio-supply = <&vreg_l12b_1p8>;
+
+	backlight = <&backlight>;
+	reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	rotation = <90>;
+};