# Rockchip RK3582 SoC octa core 4-16GB SoC eMMC USB3
BOARD_NAME="Radxa E52C"
BOARD_VENDOR="radxa"
BOARDFAMILY="rockchip-rk3588"
BOARD_MAINTAINER="amazingfate schwar3kat"
BOOTCONFIG="radxa-e52c-rk3588s_defconfig"
KERNEL_TARGET="vendor,current,edge"
BOOT_FDT_FILE="rockchip/rk3588s-radxa-e52c.dtb"
BOOT_SCENARIO="spl-blobs"
BOOT_SOC="rk3588"
DEFAULT_CONSOLE="serial"
IMAGE_PARTITION_TABLE="gpt"
HAS_VIDEO_OUTPUT="no"

function post_family_tweaks_bsp__radxa_e52c_enable_leds() {
	display_alert "Creating board support LEDs config for radxa-e52c."
	cat <<- EOF > "${destination}"/etc/armbian-leds.conf
	[/sys/class/leds/lan-led]
		trigger=netdev
		interval=52
		brightness=1
		link=1
		tx=0
		rx=1
		device_name=lan

		[/sys/class/leds/wan-led]
		trigger=netdev
		interval=52
		brightness=1
		link=1
		tx=0
		rx=1
		device_name=wan

		[/sys/class/leds/mmc0::]
		trigger=mmc0
		brightness=0

		[/sys/class/leds/sys-led]
		trigger=heartbeat
		brightness=0
		invert=0

	EOF

	# add a network rule to rename interfaces to match device labeling.
	display_alert "Creating board support network rename rule to rename interfaces to match device labeling for radxa-e52c"
	mkdir -p "${destination}"/etc/udev/rules.d/
	cat <<- EOF > "${destination}"/etc/udev/rules.d/70-rename-lan.rules
		    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", KERNEL=="enP3p49s0", NAME="wan"
		    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", KERNEL=="enP4p65s0", NAME="lan"
	EOF
}

# Mainline U-Boot, only for non-vendor BRANCH
function post_family_config__radxa_e52c_use_mainline_uboot() {
	[[ "${BRANCH}" == "vendor" ]] && return 0

	declare -g BOOT_FDT_FILE="rockchip/rk3582-radxa-e52c.dtb"
	display_alert "$BOARD" "u-boot ${BOOTBRANCH_BOARD} overrides" "info"
	declare -g BOOTCONFIG="radxa-e52c-rk3582_defconfig"
	declare -g BOOTSOURCE="https://github.com/u-boot/u-boot.git"
	declare -g BOOTBRANCH="tag:v2026.01"
	declare -g BOOTPATCHDIR="v2026.01"
	declare -g BOOTDIR="u-boot-${BOARD}"
	declare -g UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin"
	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # disable stuff from rockchip64_common; we're using binman here which does all the work already

	# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
	function write_uboot_platform() {
		dd "if=$1/u-boot-rockchip.bin" "of=$2" bs=32k seek=1 conv=notrunc status=none
	}
}

# Mainline U-Boot, only for non-vendor BRANCH
function post_config_uboot_target__extra_configs_for_radxa_e52c_mainline_uboot() {
	[[ "${BRANCH}" == "vendor" ]] && return 0

	display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable BTRFS filesystem support" "info"
	run_host_command_logged scripts/config --enable CONFIG_CMD_BTRFS
}