/* * Copyright (C) 2015 Hardkernel Co,. Ltd * Dongjin Kim * * Configuration settings for ODROID-C2 (AMLogic S905) board, * cloned from include/configs/gxb_p200_v1.h * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __ODROID_C2_H__ #define __ODROID_C2_H__ #include #define CONFIG_MACH_ODROIDC2 1 #ifndef __SUSPEND_FIRMWARE__ #include #endif /* for compile problem of A53 and m3 */ #define CONFIG_SYS_GENERIC_BOARD 1 #ifndef __SUSPEND_FIRMWARE__ #ifndef CONFIG_AML_MESON #warning "include warning" #endif #endif /* for compile problem of A53 and m3 */ /* CPU */ /* Clock rnage : 600~1800MHz, should be multiple of 24 */ #define CONFIG_CPU_CLK 1536 /* SMP Definitions */ #define CPU_RELEASE_ADDR secondary_boot_func /* DDR */ #define CONFIG_DDR_SIZE (1024 + 512) // MB /* Clock range : 384~1200MHz, should be multiple of 24 */ #define CONFIG_DDR_CLK 912 #define CONFIG_DDR_TYPE CONFIG_DDR_TYPE_DDR3 /* DDR channel setting, please refer hardware design. * CONFIG_DDR0_RANK0_ONLY : one channel * CONFIG_DDR0_RANK01_SAME : one channel use two rank with same setting * CONFIG_DDR01_SHARE_AC : two channels */ #define CONFIG_DDR_CHANNEL_SET CONFIG_DDR0_RANK01_SAME #define CONFIG_DDR_FULL_TEST 0 // 1 for ddr full test #define CONFIG_NR_DRAM_BANKS 1 /* DDR power saving */ #define CONFIG_DDR_ZQ_POWER_DOWN 1 #define CONFIG_DDR_POWER_DOWN_PHY_VREF 1 /* DDR detection */ #define CONFIG_DDR_SIZE_AUTO_DETECT 1 /* Platform power init config */ #define CONFIG_PLATFORM_POWER_INIT #define CONFIG_VCCK_INIT_VOLTAGE 1100 #define CONFIG_VDDEE_INIT_VOLTAGE 1050 // voltage for power up #define CONFIG_VDDEE_SLEEP_VOLTAGE 850 // voltage for suspend /* CEC */ #define CONFIG_CEC_OSD_NAME "ODROID-C2" #define CONFIG_CEC_WAKEUP /* Serial config */ #define CONFIG_CONS_INDEX 2 #define CONFIG_BAUDRATE 115200 #define CONFIG_AML_MESON_SERIAL 1 #define CONFIG_SERIAL_MULTI 1 //for detect remote key #define CONFIG_IR_REMOTE 1 //Enable ir remote wake up for bl30 #define CONFIG_IR_REMOTE_POWER_UP_KEY_CNT 3 #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL1 0XE51AFB04 //amlogic tv ir --- power #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL2 0XBB44FB04 //amlogic tv ir --- ch+ #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL3 0xF20DFE01 //amlogic tv ir --- ch- #define CONFIG_IR_REMOTE_POWER_UP_KEY_VAL4 0xFFFFFFFF #define CONFIG_BOOTDELAY 1 // Seconds /* args/envs */ #define CONFIG_SYS_MAXARGS 64 #define CONFIG_EXTRA_ENV_SETTINGS \ "boardname=ODROIDC2\0" \ "loadaddr=0x10800000\0" \ "dtb_mem_addr=0x1000000\0" \ "fdt_high=0x20000000\0" \ "display_layer=osd1\0" \ "fb_addr=0x3d800000\0" \ "outputmode=720p60hz\0" \ "bootargs=root=/dev/mmcblk0p1 init=/sbin/init console=ttyS0,115200 logo=${display_layer},loaded,${fb_addr},${outputmode} vout=${outputmode}, hdmimode=720p60hz androidboot.hardware=odroidc2 earlyprintk=aml-uart,0xc81004c0\0" \ "bootcmd=ext4load mmc 0 ${loadaddr} boot.img; bootm ${loadaddr}\0" #define CONFIG_PREBOOT #define CONFIG_BOOTCOMMAND //#define CONFIG_ENV_IS_NOWHERE 1 #define CONFIG_ENV_SIZE (64 * SZ_1K) /* 32kB */ #define CONFIG_ENV_OFFSET (1024 * SZ_1K) /* FIXME: should be close to U-boot image size to save space */ #define CONFIG_FIT 1 #define CONFIG_OF_LIBFDT 1 #define CONFIG_ANDROID_BOOT_IMAGE 1 #define CONFIG_ANDROID_IMG 1 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size*/ /* Support commands */ #define CONFIG_CMD_SAVEENV 1 #define CONFIG_CMD_CACHE 1 #define CONFIG_CMD_BOOTI 1 #define CONFIG_CMD_EFUSE 1 //#define CONFIG_CMD_I2C 1 #define CONFIG_CMD_MEMORY 1 #define CONFIG_CMD_FAT 1 #define CONFIG_CMD_EXT4 1 #define CONFIG_CMD_GPIO 1 #define CONFIG_CMD_RUN 1 #define CONFIG_CMD_REBOOT 1 #define CONFIG_CMD_ECHO 1 #define CONFIG_CMD_JTAG 1 #define CONFIG_CMD_AUTOSCRIPT 1 #define CONFIG_CMD_BMP 1 #define CONFIG_CMD_USB 1 #define CONFIG_CMD_NET 1 #define CONFIG_CMD_MISC 1 #define CONFIG_CMD_ITEST 1 #define CONFIG_CMD_CPU_TEMP 1 #define CONFIG_CMD_MEMTEST 1 //#define CONFIG_CMD_USB_MASS_STORAGE 1 //#define CONFIG_CMD_FASTBOOT 1 //#define CONFIG_CMD_INI 1 #if defined(CONFIG_CMD_USB_MASS_STORAGE) #define CONFIG_USB_GADGET 1 #define CONFIG_USB_GADGET_MASS_STORAGE 1 #define CONFIG_USBDOWNLOAD_GADGET 1 #endif #if defined(CONFIG_USB_GADGET) #define CONFIG_USB_GADGET_DUALSPEED 1 #define CONFIG_USB_GADGET_S3C_UDC_OTG 1 #define CONFIG_USB_GADGET_VBUS_DRAW 0 #define CONFIG_SYS_CACHELINE_SIZE 64 #endif #if defined(CONFIG_USBDOWNLOAD_GADGET) #define CONFIG_G_DNL_VENDOR_NUM 0x18d1 #define CONFIG_G_DNL_PRODUCT_NUM 0x0002 #define CONFIG_G_DNL_MANUFACTURER "Hardkernel Co., Ltd" #endif #if defined(CONFIG_CMD_FASTBOOT) #define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR #define CONFIG_USB_FASTBOOT_BUF_SIZE SZ_512M #define CONFIG_FASTBOOT_FLASH 1 #if defined(CONFIG_FASTBOOT_FLASH) #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 #endif #endif #if defined(CONFIG_CMD_MEMTEST) #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_LOAD_ADDR #define CONFIG_SYS_MEMTEST_END \ (PHYS_SDRAM_1_SIZE - CONFIG_SYS_MEMTEST_START) #define CONFIG_SYS_ALT_MEMTEST 1 #endif /* File systems */ #define CONFIG_DOS_PARTITION 1 #define CONFIG_MMC 1 #define CONFIG_FS_FAT 1 #define CONFIG_FS_EXT4 1 #define CONFIG_LZO 1 /* storage: emmc/nand/sd */ #define CONFIG_AML_NAND 1 #define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_IS_IN_MMC 1 #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_AML_SD_EMMC 1 #if defined(CONFIG_AML_SD_EMMC) #define CONFIG_GENERIC_MMC 1 #define CONFIG_CMD_MMC 1 #endif #define CONFIG_PARTITIONS 1 #define CONFIG_SYS_NO_FLASH 1 /* VPU */ #define CONFIG_AML_VPU 1 #if defined(CONFIG_AML_VPU) #define CONFIG_VPU_PRESET 1 #endif /* DISPLAY & HDMITX */ #define CONFIG_AML_HDMITX20 1 #define CONFIG_AML_CANVAS 1 #define CONFIG_AML_VOUT 1 #define CONFIG_AML_OSD 1 #define CONFIG_OSD_SCALE_ENABLE 1 #if defined(CONFIG_AML_VOUT) #define CONFIG_AML_CVBS 1 #endif /* USB * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard * Enable CONFIG_MUSB_UDD for Device functionalities. */ /* #define CONFIG_MUSB_UDC 1 */ #if defined(CONFIG_CMD_USB) #define CONFIG_M8_USBPORT_BASE_A 0xc9000000 #define CONFIG_M8_USBPORT_BASE_B 0xc9100000 #define CONFIG_USB_STORAGE 1 #define CONFIG_USB_DWC_OTG_HCD 1 #define CONFIG_USB_DWC_OTG_294 1 #endif /* NETWORK */ #if defined(CONFIG_CMD_NET) #define CONFIG_AML_ETHERNET 1 #define CONFIG_NET_MULTI 1 #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_RARP 1 #if 0 #define CONFIG_NET_RGMII 1 #define CONFIG_NET_RMII_CLK_EXTERNAL 1 // Use external 50MHz #endif #define IP101PHY 1 #define CONFIG_HOSTNAME odroidc2 #define CONFIG_ETHADDR 00:15:18:01:81:31 /* MAC address */ #define CONFIG_GATEWAYIP 192.168.0.1 /* Gateway */ #define CONFIG_IPADDR 192.168.0.2 /* IP */ #define CONFIG_NETMASK 255.255.255.0 /* Netmask */ #define CONFIG_SERVERIP 192.168.0.10 /* TFTP server */ #endif /* I2C */ #if defined(CONFIG_CMD_I2C) #define CONFIG_SYS_I2C_AML 1 #define CONFIG_SYS_I2C_SPEED 400000 // kHz #endif /* MISC */ #define CONFIG_EFUSE 1 #define CONFIG_NEED_BL301 1 #define CONFIG_SYS_LONGHELP 1 #define CONFIG_SYS_MEM_TOP_HIDE 0x08000000 /* Hide 128MB for kernel reserve */ //#define CONFIG_DISPLAY_LOGO 1 //#ifdef CONFIG_DISPLAY_LOGO //#define CONFIG_VIDEO_BMP_GZIP 1 //#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (3 << 20) /* for decompressed img */ //#endif /* ODROID reboot reasons */ #define ODROID_REBOOT_CMD_UNKNOWN -1 #define ODROID_REBOOT_CMD_COLD 0x0 #define ODROID_REBOOT_CMD_NORMAL 0x1 #define ODROID_REBOOT_CMD_FASTBOOT 0x5 #define ODROID_REBOOT_CMD_RECOVERY 0x6 #define CONFIG_SECURE_STORAGE 1 //board customer ID #define CONFIG_CUSTOMER_ID (0x8343742714390532) #if defined(CONFIG_CUSTOMER_ID) #undef CONFIG_AML_CUSTOMER_ID #define CONFIG_AML_CUSTOMER_ID CONFIG_CUSTOMER_ID #endif #endif